#1
28th November 2014, 08:00 AM
| |||
| |||
UPPCL Junior Engineer Paper
I want to appear in exam for Junior Engineer Post in UPPCL so please provide me last years question papers for Civil branch?
|
#2
28th November 2014, 08:27 AM
| |||
| |||
Re: UPPCL Junior Engineer Paper
UPPCL is Uttar Pradesh Power Corporation Ltd conducts exam for selection of applicants for post of Junior Engineer (Trainee). Last years question papers of UPPCL Junior Engineer Exam for civil branch: 1 A good brick should not absorb water by weight more than ____ of its dry weight. (1) 5% (2) 10% (3) 15% (4) 20% 2 Efflorescence is (1) the formation of white patches on the brick surface (2) due to insoluble salts in the brick clay (3) swelling of brick due to presence of carbonaceous matter and gas (4) deformation of brick due to exposure to rain 3 The term king closer is used in relation to (1) doors and widows (2) King post truss (3) Queen post truss (4) brick masonary 4 Which one of the following test is used to determine the rate of wear of stones? (1) Crushing test (2) abrasion test (3) attrition test (4) impact test 5 The horizontal projections at the head of a door frame which are embedded into the side walls for fixing the frame are known as (1) horns (2) holdfasts (3) jambs (4) rebates 6 Which of the following is not a natural defect in timber? (1) Knot (2) Twisted fibres (3) Burls (4) Honey combing 7 Seasoning of timber is required to (1) soften the timber (2) harden the timber (3) strengthening the timber (4) removing sap from timber 8 Before testing setting time of cement, one should first test for (1) Soundness (2) strength (3) fineness (4) consistency 9 For complete hydration of cement, water-cement ratio needed is (1) less than 0.25 (2) more than 0.25 but less than 0.35 (3) more than 0.35 but less than 0.45 (4) more than 0.45 but less than 0.60 10 Distemper is used to coat (1) external concrete surfaces (2) interior surfaces not exposed to weather (3) wood work (4) compound walls 11 The expansion and shrinkage of plywoods are comparatively very low as plies in plywood are (1) held in position by adhesives (2) glued under pressure (3) placed at right angles to each other (4) prepared from veneers 12 The representative fraction of 1/2500 means that the scale 1 cm is equal to (1) 0.25 m (2) 2.5 m (3) 25 m (4) 250 m 13 A 30 m chain is found to be 0.1 m short throughout the measurement. If distance measured is recorded as 300 m, then actual distance measured is (1) 299.0 m (2) 300.1 m (3) 301.0 m (4) 310.0 m 14 Which of the following methods of plane table is used to locate the position of an inaccessible point? (1) Radiation (2) Intersection (3) Traversing (4) Resection 15 The angle of intersection of two plane mirrors of an optical square is (1) 30o (2) 45o (3) 60o (4) 90o Detailed Last years question papers of UPPCL Junior Engineer Exam for Civil branch: UPPCL Junior Engineer Exam paper 1 |
Thread Tools | Search this Thread |
|