2023 2024 Student Forum > Management Forum > Main Forum

 
  #2  
31st July 2014, 08:34 AM
Super Moderator
 
Join Date: Apr 2013
Re: SSC Junior Engineer position paper

Here I am giving you question paper for SSC Junior Engineer examination in a PDF file attached with it so you can get It easily.

1. A well-seasoned timber has a moisture
content of about
a. 15% to 20%
b. 10% to 12%
c. 5% to 85
d. 2% to 3%

2. Dry rot in timber is caused by
a. Lack of ventilation
b. Lack of light
c. Immersion in water
d. Alternate wet and dry atmosphere

3. Wood is impregnated with creosote oil in
order to
a. Change its colour
b. Protect against fungi
c. Protect the annular layers
d. Fill up the pores

4. Consider the following statements :
Bricks are soaked in water before use in
masonry work
1. to remove dust
2. to remove air voids
3. so that they do not absorb water from
cement mortar
Which of these statements is/are correct ?
a. 1, 2 and 3
b. 1 only
c. 2 and 3
d. 3 only

5. The proper size of mould for testing
compressive strength of cement is
a. 7.05 cm tube
b. 10.05 cm cube
c. 15 cm cube
d. 12.05 cm cube

6. The specific gravity of commonly
available ordinary portland cement is
a. 4.92
b. 3.15
c. 2.05
d. 1.83
7. A quick-setting cement has an initial
setting time of about
a. 50 minutes
b. 40 minutes
c. 15 minutes
d. 5 minutes

8. Match List I (Cement Mortar for Different
Work) with List II(Proportion of Cement
and sand in Mortar ) and select the correct
answer :
List I
A. Cement mortar for normal brick work
B. Cement mortar for plastering works
C. Cement mortar for grouting the
cavernous rocks
D. Cement mortar for guniting
List II
1. 1 : 4
2. 1 : 3
3. 1 : 6
4. 1 : 1.5
A B C D
a. 3 4 2 1
b. 1 2 3 4
c. 3 1 4 2
d. 1 4 2 3

9. Match List I(Admixture) with list II
(Action in Concrete) and select the correct
answer :
List I
A. Calcium lignosulphonate
B. Aluminum powders
C. Tartaric acid
D. Aluminum sulphate
List II
1. Anti bleeder
2. Retarder
3. Air entrainer
4. Water reducer
A B C D
a. 3 2 1 4
b. 4 3 2 1
c. 3 4 1 2
d. 4 2 3 1

10. A mortar in which both cement and lime
are used in definite proportions as binding
materials is reffered to as
a. Light weight mortar
b. Fire resistant mortar
c. Gauged mortar
d. Water resistant mortar

11. In order to improve the workability of
harsh cement mortar which of the
following items is/are added ?
1. water
2. Plaster of Paris
3. Lime






Attached Files
File Type: pdf SSC Junior Engineer position paper.pdf (3.23 MB, 106 views)
  #3  
22nd March 2015, 05:25 PM
Unregistered
Guest
 
Re: SSC Junior Engineer position paper

Hey, I want to appear SSC Junior Engineer exam will you provide me the sample paper of the SSC Junior Engineer exam ?
  #4  
22nd March 2015, 05:40 PM
Super Moderator
 
Join Date: Mar 2013
Re: SSC Junior Engineer position paper

Hey I am here providing you pattern of the SSC Junior Engineer exam on the basis of which there is the paper in exam.

SSC Junior Engineer Exam Pattern:.

The examination will be conducted in two stages:
Written Test (500 marks)
Interview (100 marks)

Written Test pattern:

Written test will consists of two papers
Paper -I and Paper-II.
Paper-I will consist of Objective Type Multiple Choice questions only

Paper-II will be Conventional Type questions .
There will be negative marking of 0.25 marks for each wrong answer in Paper-I.

Scheme of Written Exam:



SSC Junior Engineer Syllabus:

Syllabus: The standard of the questions in Engineering subjects will be approximately of the level of Diploma in Engineering (Civil/ Electrical/ Mechanical) from a recognized Institute, Board or University recognized by All India Board of Technical Education. All the questions will be set in SI units. The details of the syllabus are given below:

Paper-I: Paper I will consists of General Intelligence & Reasoning, General Awareness, General Engineering (Civil and Structural), (Electrical & Mechanical).

Paper-II: Paper II consists of Civil & Structural Engineering , Civil Engineering, Structural Engineering, Electrical Engineering, Mechanical Engineering, Thermal Engineering, Fluid Mechanics & Machinery and Production Engineering.


Quick Reply
Your Username: Click here to log in

Message:
Options

Thread Tools Search this Thread



All times are GMT +5. The time now is 04:27 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
SEO by vBSEO 3.6.0 PL2

1 2 3 4