|
#2
28th March 2016, 10:31 AM
| |||
| |||
| Re: CIDCO Model Cw99 Manual
As you asking for the CIDCO Model Cw 99 user manual here I am giving you the user manual of the CIDCO Model Cw 99 the user manual is as follow : HOW TO ADJUST THE CONTRAST Do not press and hold the DELETE key without simultaneously pressing on of the REVIEW keys. You could accidently erase the call memory if you press only the DELETE key. To lighten the display, press and hold the DELETE key while also pressing the To darken the display, press and hold the DELETE key while also pressing the REVIEW> key repeatedly until you get the desired result. HOW TO REPLACE THE BATTERY WARNING: To prevent shock, disconnect the line cord between the wall jack and the Call Waiting ID unit before replacing the battery. CAUTION: Do not remove the AC adapter when replacing the battery or you'll delete all stored Caller ID information. A small symbol of a battery appears in the upper left-hand corner of the display when your battery needs replacement. 1. Disconnect the line cord that connects the Call Waiting ID unit to the wall. 2. Follow the instructions under Step 3 of Installing Your Call Waiting ID Unit. HOW TO ADD ADDITIONAL CALL WAITING ID UNITS If you have several phones in your home or business and wish to receive Caller ID/Call Waiting ID information on every phone, you need to connect a CIDCO Call Waiting ID unit to every phone. Otherwise, you won't receive Caller ID/Call Waiting ID information if you answer a phone that is not connected to a Call Waiting ID unit. All Call Waiting ID units are set to default as the MAIN unit. If you install additional Call Waiting ID units, you need to reporgram each additional Calll Waiting ID as an extgension (EXT) unit. You can use other CIDCO Caller ID units, but you do not receive Call Waiting information while you are on another call. If this Model 99CWi is your first Call Waiting ID product, you do not need to do anything. The Model 99CWi automatically defaults to MAIN. If this Model 99CWi is not your first Call Waiting ID product, you need to program it as an extension (EXT) unit by following the instructions: 1. Press and hold the two REVIEW keys for over 8 seconds to see this display: [EXT *MAIN] 2. Release the REVIEW keys and press the DELETE key to set the unit as an extension. The screen returns to its initial state. Remember, you must program only one Call Waiting ID unit as a MAIN unit. Additional units need to be programmed as extensions (EXT). rest of the parts installation Manual guise you mau find from the below attachment that is free to download  |