ITI Draughtsman Solved Question paper

[Arun Vats]

Tell me, how can I get ITI Draughtsman Solved model Question paper???

You are asking for the ITI Draughtsman mechanical Syllabus. Here I am uploading a file that contains the ITI Draughtsman mechanical Syllabus. You can download this from here. Here I am also provide you some content of the file. This is as follows:

Importance of trade training, List of tools &
Machinery used in the trade.
Health & Safety: Introduction to safety
equipments and their uses. Introduction of
first aid, operation of Electrical mains.
Occupational Safety & Health
Importance of housekeeping & good shop
floor practices.
Health, Safety and Environment guidelines,
legislations & regulations as applicable.
Disposal procedure of waste materials like
cotton waste, metal chips/burrs etc. Basic
safety introduction,
Personal protective Equipments(PPE):-
Basic injury prevention, Basic first aid,
Hazard identification and avoidance, safety
signs for Danger, Warning, caution &
personal safety message.
Preventive measures for electrical accidents
& steps to be taken in such accidents.
Use of Fire extinguishers

ITI Draughtsman mechanical Syllabus

[Arun Vats]

You are looking for ITI Draughtsman Solved model Question paper, I am giving here;

1. A hydraulic press has a ram of 15 cm diameter and plunger of 1.5 cm.
It is required to lift a mass of 1000kg. The force required on plunger is
nearly equal to
a) 100N b) 1000N c) 10000N d) 1ON Ans.

2. If the stream function is given by Ψ= 3xy, then the velocity at a point
(2, 3) will be
a) 7.21 unit b) 18 unit c)10.82 unit d)54unit Ans.

3. The correct sequence of the centrifugal, pump components through
which the fluid flows is
a) Impeller, Suction pipe, Foot valve and strainer, Delivery pipe b) Foot valve and strainer, Suction pipe, Impeller, Deliverypipe c) Impeller, Suction pipe,Delivery pipe,Foot valve and strainer d) Suction pipe, Delivery pipe, Impeller,Foot valve and strainer Ans.

4. The relation p = constant, where y is the ratio of the specific heats of
ideal gas, is applicable to
a) Any adiabatic process b)Only reversible adiabatic process c) Only irreversible adiabatic process d) Only isothermal process Ans.

5. Across a normal shock
a) static pressure and the static temperature rise b) entropy remains constant c) velocity and static pressure decrease d) density and temperature decrease Ans.

6. A necessary precaution in selection of pumps for parallel operations is
that
a) H-Q characteristics of both should be identical b) Both pumps should be centrifugal type c) Both pumps should be identical d) There should not be change from positive to negative slope In H-Q curve Ans.

7. A metallic cube of side 10 cm, density 6.8 gm/cc is floating in liquid
mercury (density 13.6gm/cc), with 5 cm height of cube exposed above
the mercury level. Water (density 1 gm/cc) is filled over this, to
submerge the cube fully. The new height of cube exposed above mercury
level is
a) 4.6 cm b)5.4cm c) 5.0 cm d)5.8cm Ans.

8. The pressure drop for a relatively low Reynolds number flow in a 600
mm, 30 m long pipeline is 7OkPa. What is the wall shear stress?
a) 0 Pa b)1400 Pa c) 700 Pa d) 350 Pa Ans.

9. The radiative heat transfer rate per unit area (W/m2) between two
plane parallel grey surfaces (emissivity 0.9) maintained at 400 K and
300 K is (Stefan Boltzmann constant σ = 5.67 x 10 W/m2k4)
a) 1020 b)464 c)812 d)567 Ans.

10. At the eye tip of a centrifugal impeller, blade velocity is 200 m/s
while the uniform axial velocity at the inlet is 150 m/s. If the sonic
velocity is 300 m/s, then the inlet Mach number of the flow will be
a)0.75 b) 0.66 c) 0.90 d)0.83 Ans.

11. The transition Reynolds number for flow over a flat plate is 5* 105.
What is the distance from the leading edge at which transition will occur
for flow of water with a uniform velocity of 1 m/s? (For water. the
kinematic viscosity, v = 0.86* 10-6 m2/s)
a) 0.43m b) 1m c)43m

I am searching for the ITI Draughtsman mechanical Syllabus? Can you please provide me the ITI Draughtsman mechanical Syllabus?

here I am looking for ITI Draughtsman Solved Question paper to do its exam preparation so will you plz let me know from where I can do download it ?

[sumit]

As you want here I am giving bellow ITI Draughtsman Solved Question paper so on your demand :


Syllabus of Draughtsman (Civil) trade as prescribed by various ITIs.

Sem. I

Sr. No.

Subjects of Study

Trade Practical

Trade Theory

1

Orientation of Trade & Institution.

Rules & regulation of the Institute & Trade. List of Equip., Inst. & Achievements.

2

Practice with BIS Code of Practice for Architectural & building drawings

Introduction of BIS Code of Practice

for Architectural & building drawings

3

Practice with signs & symbols in Building Drawings

Building Materials

4

Practice with various permanent and temporary structures

Permanent & Temporary structures

5

Showing Construction details.

Masonry

6

Drawing details of various structures with form work. Details of different types of foundation

Soil & Foundations

7

Drawing details of various treatments at ground & upper floor

Treatments for buildings

8

Drawing construction details of various floors and flooring

Floors & Floorings

9

Drawing details of Arches & Lintels at various opening of structures with form work

Arches & Lintels

10

Drawing details of various Doors, Windows, ventilators

Doors, Windows, ventilators.

11

Drawing details of different types of stairs

Stairs

12

Drawing details of various Roofs

Roofs

13

Drawing details of various ground & upper floor

Reinforced cement concrete

14

Practice with operating (window) & application (MS Office) software.

Fundamental of computers & Introduction of CAD


Project work

Sem. II




Trade Practical

Trade Theory

1

Practice with local building development rules.

Building bye-laws

2

Planning of different types of building.

Principles of planning of residential building.

3

Practice with latest design of public Building Drawings

Planning of Public Building.

4

Practice with Prefabricated structure of building.

Prefabricated structures

5

Showing details of RCC in Buildings

Reinforced Cement Concrete

6

Drawing details of steel structures

Steel structures

7

Drawing details of various opening structures with form work.

Plumbing

8

Drawing IN 2D, 3D in software

2D,3D with CAD,3D Max, STAAD


Project Work

Sem. III



Trade Practical

Trade Theory

1

drawing a irrigation structures

Water resources

2

drawing a details of construction of different types of roads

Roads

3

drawing a details for rails and gauges

Railways

4

Drawing -types of bridges.

Bridges

5

2D, 3D drawings of PHE

PHE

6

Preparing 2D, 3D CAD drawings of various structures of Bridges.

Bridges

7

Drawing details of various structures in 2D & 3D

Structural Drawings


Project work

Sem. IV



Trade Practical

Trade Theory

1

Reading topography map, contours drawings

Surveying classification

2

Operating & setting up a Thedolite. Observation of readings and sighting the points

Levelling introduction to Thedolite, identification & understanding of parts

3

Field procedure for coordinate measurement field procedure to run a traverse survey-linking data files.

Total Station application, components parts, accessories used, characteristics, features, Electronic display & Data reading

4

GPS-components, steps in mapping, comparison of GPS with GIS,CAD and other system-field applications

Remote sensing introduction, application in civil engineering, ideal remote sensing system

5

Preparation of detailed Estimate by using software

Estimate-necessity, importance, types

6

Preparing drawing system of sewerage- one pipe system, two pipe system, and single stack system

Working with other software to import to drawing -Concept of developing solid from sketch- Surface Modelling concepts

Project work