#1
 
 
DMRC Junior Engineer Mechanical Exam Sample Question Paper 
#2
 
 
Re: DMRC Junior Engineer Mechanical Exam Sample Question Paper
Here is the list of few questions of DMRC Junior Engineer Mechanical Exam Sample Question Paper which you are looking for . In PERT analysis a critical activity has A) maximum Float B) zero Float C) maximum Cost D) minimum Cost Answer : (B) Environment friendly refrigerant R134a is used in the new generation domestic refrigerators. Its chemical formula is A) CH C1 F2 B) C2 C13 F3 C) C2 C12 F4 D) C2 H2 F 4 Answer : (D) The SN curve for steel becomes asymptotic nearly at A) 103 cycles B) 104 cycles C) 106 cycles D) 109 cycles Answer : (C) In a rolling process, sheet of 25 mm thickness is rolled to 20 mm thickness. Roll is of diameter 600 mm and it rotates at 100 rpm. The roll strip contact length will be A) 5 mm B) 39 mm C) 78mm D) 120mm Answer : (A) The angle between two unitmagnitude coplanar vectors P(0.866, 0.500,0) and Q(0.259, 0.966,0) will be A) 0° B) 30° C) 45° D) 60° Answer : (C) 15 A lot has 10% defective items. Ten items are chosen randomly from this lot. The probability that exactly 2 of the chosen items are defective is A) 0.0036 B) 0.1937 C) 0.2234 D) 0.3874 Answer : (B) the execution of a CNC part program block NO20 GO2 X45.0 Y25.0 R5.0 the type of tool motion will be A) circular Interpolation — clockwise B) circular Interpolation — counterclockwise C) linear Interpolation D) rapid feed Answer : (A) In an interchangeable assembly, shafts of size 25.000+0.040mm mate with holes of size 25.000+0.020 mm. The maximum possible clearance in the assembly will be A) 10 microns B) 20 microns C) 30 microns D) 60 microns Answer : (D) SN curve for steel becomes asymptotic nearly at A) 103 cycles B) 104 cycles C) 10 6 cycles D) 10 9 cycles Answer : (C) 
Thread Tools  Search this Thread 
