BSNL TTA question papers

Hi I am preparing for the BSNL TTA Exam so provide me the question paper of this exam?

[Quick Sam]

Oh Good, solving previous year question paper is the best way of preparing so here I am providing you the question paper.

BSNL TTA Exam question papers

Part A: Basic Engineering

1. The probability of hitting a target from one gun 9/10, from another gun is 7/10. If both gun are fired at the same time, the probability of hitting the target is

(A) 2/20 (B) 63/100
(C) 16/20 (D) 63/20

2. If the three vectors a, b and c are coplanar , then the missed product a x b. c is

(A) Zero (B) Non-Zero
(C) Unity (D) Non of these

3. Limit sin x/x is x?0

(A) not defined (B) 1
(c) zero (D) -1

4. When a body hits an obstacle, the force with which it hits the obstacle depends upon its

(A) average velocity
(B) velocity at the instant of collision
(C) initial velocity
(D) all of these

5. The wavelength of visible light is of the order of

(A) 1µm (B) 100 µm
(C) 1mm (D) 1 Å

6. Whenever a source of sound moves towards an observer

(A) the frequency heard by the observer is less than that of the source
(B) the frequency heard by the observer is greater than that of the source
(C) the frequency heard by the observer is unchanged
(D) the wavelength of sound heard is greater than that of the sound emitted

7. Moving electric charges will interact with

(A) electric field only
(B) magnetic field only
(C) both of these
(D) none of these

8. Gamma radiation is most similar to

(A) sound waves (B) X-ray
(C) Alpha particles (D) neutrons

9. The fundamental particle responsible for keeping the nucleus together is

(A) meson (B) anti proton
(C) positron (D) muon

10. Air contains 21% oxygen by volume and the rest nitrogen. If the barometer pressure is 740 mm of Hg the partial pressure of oxygen is close to

(A) 155 mm of Hg
(B) 310 mm of Hg
(C) 465 mm of Hg
(D) 162 mm of Hg

11. In the electrolytic cell

(A) electrical energy is converted into chemical energy
(B) chemical energy is converted into electrical energy
(C) mechanical energy is converted into potential energy
(D) potential energy is converted into kinetic energy

12. The force required to maintain a body at constant speed in free space is equal to

(A) the mass of the body
(B) zero
(C) the weight of the body
(D) the force required to stop it

13. If the length of a spring is halved, the spring constant becomes

(A) half (B) 1/4th
(C) double (D) four times

14. The coefficient of static friction depends on

(A) the material of the bodies in contact
(B) the quality of surface finish of the bodies
(C) the presence of foreign matter between the surface
(D) all of these

15. The units of angular impulse in SI system are

(A) Nms (B) Ns
(C) Nm/s (D) Ns/m

16. Stainless steel contains iron and

(A) Chromium and nickel
(B) Chromium and carbon
(C) Nickel and carbon
(D) Chromium and manganese

17. The property of material by which it offers resistance to scratching or indentation is called

(A) Brittleness
(B) Hardness
(C) Toughness
(D) Resilience

18. The failure of a material due to repeated stressing is known as

(A) Creep
(B) Fracture
(C) Fatigue
(D) Brittle Fracture

19. The electric device which blocks DC but allows AC is called

(A) Capacitor
(B) Inductor
(C) Amplifier
(D) Transducer

20. When a charge is moved from one point to another in an electric field, the work done is

(A) independent of the path
(B) zero along the direction of the field
(C) measured in Joules per metre
(D) measure in Volt per metre

21. A capacitor with lowest leakage is

(A) Paper (B) Ceramic
(C) Polyester (D) Mica

22. A zener diode operates

(A) In an extremely high forward bias
(B) In an extremely low reverse bias
(C) In an extremely low forward bias
(D) In a reverse bias higher than laid down voltage

23. The specific gravity of a lead acid cell is often used as a measure of its

(A) Rate of discharge
(B) Operating temperature
(C) State of charge
(D) Life expectancy

24. An uniformly distributed load is one which

(A) Acts at a point on a beam
(B) Spreads uniformly over the whole length of a beam
(C) Varies uniformly over the whole length of a beam
(D) loads the beam from one end only

25. A steam engine device which keeps the speed of the engine, all loads, constant is known as

(A) Flywheel
(B) Eccentric
(C) Connecting rod
(D) Governor

26. The refrigerant hiving the lowest freezing point is

(A) Ammonia
(B) Carbon dioxide
(C) Freon – 11
(D) Freon – 22

27. Heat and work are

(A) Path functions
(B) Properties of a substance
(C) Point functions
(D) Absolute units

Hi I would require the previous years question paper for the BSNL Telecom Technical Assistant examination for preparation as I plan to appear the next upcoming examination?

[Kiran Chandar]

BSNL Telecom Technical Assistant (TTA) Recruitment Test : Sample Paper

1. One of the following statement which is true for relative dielectric constant is -

a) It is dimensionless

b) It is not equal to unity for vacuum

c)) It?s value for all substances is less than one

d)) None

2. Pure metals generally have-

a) high conductivity and low temperature coefficient

b) high conductivity and large temperature coefficient

c) low conductivity and zero temperature coefficient

d) low conductivity and high temperature coefficient

3. For small size, high frequency coils, the most common core material is

a) Air

b) Ferrite

c) Powdered ion

d) Steel

4. For an abrupt junction Varactor diode, the dependence of device capacitance (C) on applied reverse bias (V) is given by-

a) C a V1/3

b) C a V-1/3

c) C a V1/2

d) C a V-1/2

5. A superconductor is a-

a) A material showing perfect conductivity and Meissner effect below a critical temperature

b) A conductor having zero resistance

c) A perfect conductor with highest dimagnetic susceptibility

d) A perfect conductor which becomes resistive when the current density through it exceeds a critical value

6. When a semiconductor based temperature transducer has a temperature coefficient of ?2500 mV/0C then this transducer is indeed a-

a) Thermistor

b) Forward biased pn junction diode

c) Reverse biased pn junction diode

d) FET

7. The location of lightning arrestor is -

a) Near the transformer

b) Near the circuit breaker

c) Away from the transformer

d) None

8. Time constant of an RC circuit increases if the value of the resistance is -

a) Increased

b) Decreased

c) Neither a nor b

d) Both a and b
9. Intrinsic semiconductors are those which -

a) Are available locally

b) Are made of the semiconductor material in its purest from

c) Have more electrons than holes

d) Have zero energy gaps

10. The primary control on drain current in a JFET is exerted by -

a) Channel resistance

b) Size of depletion regions

c) Voltage drop across channel

d) Gate reverse bias
11. The electrical conductivity of metals which is expressed in ohm-1 m-1 is of the order of -

a) 1010

b) 105

c) 10-4

d) 10-6

12. When biased correctly, a zener diode ?

a) acts as a fixed resistance

b) has a constant voltage across it

c) has a constant current passing through it

d) never overheats
13. The current amplification factor adc is given by ?

a) IC/IE

b) IC/IB

c) IB/IC

d) IB/IC

14. Compared to bipolars, FETs have-

a) high input impedance

b) low input impedance

c) same input impedance

d) none

15. The source-drain channel of JFET is -

a) ohmic

b) bilateral

c) unilateral

d) both a and b

16. diac is equivalent to a -

a) Pair of SCRs

b) Pair of four layer SCRs

c) Diode and two resistors

d) Triac width
17. When a sample of N type semiconductor has electron density of 6.25 ? 1011 /cm3 at 300K and if the intrinsic concentration of carriers in this sample is 2.5 ? 1013/cm3 then the hole density will be ?

a) 106/cm3

b) 103/ cm3

c) 1010/ cm3

d) 1012/ cm3

18. The statement ‘In any network of linear impedances, the current flowing at any point is equal to the algebraic sum of the currents caused to flow at that point by each of the sources of emf taken separately with all other emf’s reduced to zero? represents -

a) Kirchhoff’s law

b) Norton’s theorem

c) Thevenin’s theorem

d) Superposition theorem

19. One of the following modes which has the characteristics of attenuation becoming less as the frequency is increased and is attractive at icrowave frequencies of circular cylindrical wave guides is ?

a) TE1 mode

b) TM01 mode

c) TE01 mode

d) Higher order mode