Blueprint Of Engineering Drawing Mumbai University

I am doing Engineering in Drawing (ED) degree from Mumbai University and looking for the syllabus and blueprint of the Engineering Drawing semester 2 for Mumbai University? Also tell me can I get the latest syllabus from the website of University?

Hello brother I want the Blueprint Of Engineering Drawing Mumbai University so please provide it to me?

[Shaleen]

Hello brother as you asked for the Blueprint Of Engineering Drawing of Mumbai University so on your demand I am providing it you

The University of Mumbai is one of the first three state universities in India and the oldest in Maharashtra. It is abbreviated as "MU" for Mumbai University.

Blueprint Of Engineering Drawing of Mumbai University




I have blue prints of this also
Applied Mathematics-II
Applied Physics-I
Applied Chemistry-II
Structural Programming
Communication Skills

Facilities
Library
Class Rooms
Hostels
Computing Facility
Sports Facility

Faculties

Faculty of Arts
Faculty of Commerce
Faculty of Science
Faculty of Technology
Faculty of Law
Faculty of Fine Arts

Departments
Department of Lifelong Learning and Extension
Center for Disaster Management
Comparative Literature
Classics
Education
Fine Arts
Film & Media Studies
Gender Studies
Library and Information Science
Language, Linguistics and Literature
Management Studies
Philosophy
Social & Cultural Analysis
Social Science
Department of Anthropology
Department of Applied Psychology
Department of African Studies
Department of Bioethics
Department of Creative Writing
Department of Communication and Journalism:-
Department of Civics & Politics
Department of Demography
Department of Public Administration
Department of Economics
Department of Eurasian Studies
Department of Geography
Department of History
Department of Sociology
Alkesh Dinesh Mody Institute of Investment studies
Department of Commerce
Department of Business Administration (International Business, HRM)
Department of Law and Justice
Department of Criminology & Criminal Justice
Department of Atmospheric Science
Department of Biotechnology
Department of Biophysics
Department of Botany
Department of Chemistry
Department of Computer Science
Department of Environmental Science
Department of Geological Science
Department of Geobiology
Department of Human Ecology
Department of Home Science
Department of Information Technology
Department of Life Sciences
Department of Mathematics
Department of Microbiology
Department of Neural Science
Department of Nutritional Science
Centre for Nanosciences and Nanotechnology
Department of Oceanography
Department of Physics
Department of Statistics
Department of Zoology
Engineering / Technology
Automobile Engineering
Biomedical Engineering
Biotechnology
Chemical Engineering/Technology
Civil Engineering
Computer Engineering
Construction Engineering
Electrical Engineering
Electronics Engineering
Electronics and Telecommunication Engineering
Information Technology
Instrumentation Engineering
Marine Engineering
Mechanical Engineering
Printing and Packaging Technology
Production Engineering
Physical Education
Department of Physical Education and Sports Pavilion
Academy for Administrative Careers
Center for Cultural Studies
Center for Development Studies
Centre for Extramural Studies
Center for Healthcare Management
Center for Information & Communication Technology (ICT)
Department of Student Welfare (Vidyapeeth Vidyarthi Bhavan)
Diasporic Constructions of Home and Belongings ("CoHaB")
Dr Ambedkar Centre for Social Justice
Film and Media Academy
Garware Institute of Career Education and Development
Gurudev Tagore Chair of Computer Literature
Indo-Canadian Studies Centre
Institute of Modern Language
Institute of Science (managed by the state Government of Maharashtra)
Institute of Social and Economic Research
UGC Academic Staff College
Western Regional Instrumentation Centre

Address
Mumbai University
CST Road, Kalina, Santacruz East, Mumbai, Maharashtra 400098
Phone: 022 2654 3000

Can you provide me the syllabus of - FEC204 Engineering Drawing – under Bachelor of Engineering Program offered by University of Mumbai?

[Neelu Bhasin]

The syllabus of - FEC204 Engineering Drawing - under Bachelor of Engineering Program offered by University of Mumbai is as follows:


FEC204 Engineering Drawing

Objectives
1. To impart and inculcate proper understanding of the theory of projection.
2. To impart the knowledge of reading a drawing.
3. To improve the visualization skill.
4. To teach basic utility of computer aided drafting (CAD) tool.


Outcomes: Learner will be able to
1. Apply the basic principles of projections in 2D drawings.
2. Apply the basic principles of projections in converting 3D view to 2D drawing.
3. Read a given drawing.
4. Visualize an object from the given two views.
5. Use CAD tool to draw different views of a 3D object.
6. Use CAD tool to draw an object in 3D.

Detailed Contents

01
Introduction to Engineering Drawing:- Types of Lines, Dimensioning Systems as per IS conventions.
Engineering Curves:- Basic construction of Cycloid, Involutes and Helix (of cylinder) only.
Introduction to Auto CAD:- Basic Drawing and Editing Commands. Knowledge of setting up layers, Dimensioning, Hatching, plotting and Printing.


02
Projection of Points and Lines:- Lines inclined to both the Reference Planes
(Excluding Traces of lines) and simple application based problems on Projection of
lines.
@Projection of Planes:- Triangular, Square, Rectangular, Pentagonal, Hexagonal and
Circular planes inclined to either HP or VP only. (Exclude composite planes)


03
Projection of Solids:- (Prism, Pyramid, Cylinder, Tetrahedron, Hexahedron and Cone only)
Solid projection with the axis inclined to HP and VP. (Exclude Spheres, Composite, Hollow
solids and frustum of solids). Use change of position or Auxiliary plane method
Section of Solids:- Section of Prism, Pyramid, Cylinder, Tetrahedron, Hexahedron &
Cone cut by plane perpendicular to at least one reference plane.( Exclude Curved Section
Plane). Use change of position or Auxiliary plane method
Development of Lateral Surfaces of Sectioned Solids:- Lateral surface development of
Prism, Pyramid, Tetrahedron, Hexahedron, Cylinder, Cone with section plane inclined to
HP or VP only. (Exclude DLS of a solid with a hole in it and Reverse Development).
(Exclude Reverse Development)


04
Orthographic and Sectional Orthographic Projections:-
Different views of a simple machine part as per the first angle projection method
recommended by I.S.
Full or Half Sectional views of the Simple Machine parts.
Drawing of orthographic projections using Auto CAD.


05
Isometric Views:- Isometric View/Drawing of blocks of plain and cylindrical surfaces
using plain/natural scale only. (Exclude Spherical surfaces).
Drawing of Isometric views using Auto CAD.
@Reading of Orthographic Projections. [Only for Practical Exam
(AutoCAD)
and Term Work]
Orthographic Reading using Auto CAD.
Introduction to 3D in AutoCAD
Working in 3-dimensions, Viewing 3D Objects, Basic wireframe models, Extruding, simple
revolved objects. Boolean operations.


TERM WORK:

Component - 1
Drawing Sheet - 1: Projection of Solids (3 Problems)
Drawing Sheet - 2: Section of Solids and Development of lateral surfaces (2 Problems)
Drawing Sheet - 3: Orthographic Projection without section (2 Problems)
Drawing Sheet - 4: Orthographic Projection with section (2 Problems)
Drawing Sheet - 5: Isometric Views (3 Problems)


Component -2
One A-3 size sketch book consisting of:-
1) Two problems each from Engineering Curves, Projection of Lines, Planes and Solids.
One problem from Section of solids without DLS and one problem from section of
solids with DLS of that sectioned Solid.
2) Two problems from Orthographic Projections (with Section), One problem on Reading
of Orthographic projections and Two problems on Isometric views.


Component-3
Printouts (preferably on A3 size sheet) of each from:
1. Orthographic Projections with Section - 3 problems.
2. Isometric Views - 4 problems
3. Reading of Orthographic Projections - 1 problem.

Note:- 2 hrs /week Auto CAD Practical is essential for completing the Auto CAD
Drawings and take required printouts.

AUTO CAD PRACTICAL EXAMINATION: (2hrs - 50 marks):
1) Minimum 1 problem from 1 OR 3 of Component-3 for 30 marks.
(All three views with at least 12 dimensions must be asked in the exam)
AND
2) Minimum 1 problem from 2 of Component-3 for 20 marks.
Note:- Print out of the Answers have to be taken preferably in A3 size sheets and should be Assessed by External examiner only. Knowledge of concepts and accuracy of drawing should be considered during evaluation


INTERNAL ASSESSMENT TEST: (1 hr - 15 marks)
Out of the two tests, one test must be conducted by conventional way and another test must be Practical Exam (using AutoCAD software). Average of the two tests must be considered for Internal Assessment.


END SEMESTER EXAMINATION: (3 hrs - 60 marks)
1) Question paper will comprise of 6 questions, each carrying 15 marks.
2) Any 4 questions need to be solved. There wont be any compulsory Question.
3) Marks of each topic should be proportional to number of hours assigned to each Module.


Text Books.
1 N.D. Bhatt, Engineering Drawing (Plane and solid geometry), Charotar Publishing House Pvt. Ltd.
2 N.D. Bhatt & V.M. Panchal, Machine Drawing, Charotar Publishing House Pvt. Ltd.


References.
1 M.B Shah & B.C Rana, Engineering Drawing, Pearson Publications.
2 P.J. Shah, Engineering Graphics, S Chand Publications.
3 Dhananjay A Jolhe, Engineering Drawing Tata McGraw Hill.
4 Prof. Sham Tickoo (Purdue University) &GauravVerma, ( CAD Soft Technologies) : Auto CAD 2012 (For engineers and Designers), Dreamtech Press New Delhi.