Bhilai steel plant OCT sample question

Will you please provide me the Bhilai steel plant OCT test sample question? Give me the information soon.

[Quick Sam]

SAIL is Steel Authority of India. It is a Maharatna Company of Govt. of India. It is the world's leading and India's largest steel producer. It operates and owns 5 integrated steel plants at Rourkela, Bhilai, Durgapur, Bokaro and Burnpur and 3 special steel plants at Salem, Durgapur and Bhadravati.

The Bhilai Steel Plant is situated in Bhilai, Chhattisgarh. It is India's first and main producer of steel rails. It is a major producer of wide steel plates and other steel products.

Education Qualification:
Matriculation with full time engineering diploma in relevant trade

Age Limit:
18-28 years as on 01-09-2013

Salary:
Rs.9160-3%-Rs.13150/-. Consolidate pay will be paid for 2 years @Rs.10, 700 (1st year) & Rs.12, 200 (2nd year)

Application Fee:
Rs.250 for general and OBC, Rs.50 for SC/ST/PWD

Exam pattern and syllabus:

In the written examination, there will be two sections basically i.e. general ability and technical section. Both the sections in total will be of 250 marks and the question paper will contain 125 questions that are to be solved in 145 minutes in whole. All the questions in the written exam for the post of operator cum technician trainee will be multiple choice type questions. The first section of general ability will contain four sections that are given below with the marks distribution also:

Reasoning related MCQ’S: 45 marks

Quantitative aptitude related MCQ’S: 35 marks

General awareness related MCQ’S: 35 marks:

General English and grammar related MCQ’S: 35 marks

In the second section of technical paper, the objective type questions will be from the specialized domain only.

Papers:
Papers will be based on the above given syllabus. It will help you surely.

Address:
Steel Authority Of India Ltd
Rourkela Steel Plant, Rourkela, OD 769011 ‎
0661 251 0642 ‎ •

Map:
[MAP]https://maps.google.co.in/maps?q=Steel+Authority+Of+India+Ltd,+Rourkela,+Odi sha&hl=en&ll=22.221416,84.872475&spn=0.188152,0.32 6843&sll=22.895834,77.518234&sspn=1.497844,2.61474 6&oq=Steel+Authority+of+India+&hq=Steel+Authority+ Of+India+Ltd,&hnear=Rourkela,+Sundargarh,+Odisha&t =m&z=12&iwloc=A[/MAP]

Hello sir I want to prepare for Bhilai steel plant OCT so here can you pl;ease give me some sample question ?

[Raman Vij]

Hey as The Bhilai Steel Plant, located in Bhilai, in the Indian state of Chhattisgarh,

Syllabus

Reasoning related MCQ’S: 45 marks

Quantitative aptitude related MCQ’S: 35 marks

General awareness related MCQ’S: 35 marks:

General English and grammar related MCQ’S: 35 marks

Here I am giving you some qus of General awareness

Ques: The efficiency and work ratio of a simple gas turbine cycle are
A. low
B. very low
C. high
D. very high

Ques: The unit of angular acceleration is
A. N-m
B. m/s
C. m/s2
D.rad/s2

Ques: Which of the following is the lightest and most volatile liquid fuel?
A. Gasoline
B. Kerosene
C. Fuel oil
D. Nitrogen

Ques: The thermal efficiency of regenerative feed water cycle is ?
a) same as simple Rankine cycle thermal efficiency
b) less than simple Rankine cycle thermal efficiency
c) greater than simple Rankine cycle thermal
d) none of the above
Answer c

Ques: In regenerative feed heating cycle, feed water is heated by
(a) extracted steam from the turbine
(b) exhaust gases from boiler
(c) heaters
(d) all of the above
Answer a

Ques: In a regenerative feed heating cycle, the greatest efficiency can be obtained when steam is extracted only from the last stage of steam turbine
(a)when steam is extracted only from the last stage of steam turbine
(b) when steam is extracted only from the first stage of steam turbine
(c) when steam is extracted only one suitable point of steam turbine
(d)when steam is extracted from several places in different stages of steam turbines
Answer d

Ques: The following is not correct for regenerative feed heating cycle:
(a) It reduces the heat rate, and hence reduces Operating cost
(b) It increases the complication of the plant
(c) It reduces irreversibly, thus heating process in boiler tends to become revers
(d) It requires less steam flow rate for a given output power
Answer d

Ques: In regenerative feed heating
(a) larger capacity boiler is required for a given output
(b) smaller capacity condenser is required for a given output
(c) turbine output decreases due to extraction of steam
(d) all of the above
Answer d

Ques: The following is correct for regenerative feed heating cycle
(a) It reduces turbine blades erosion due to moisture.
(b) It requires less maintenance.
(c) it increases turbine output power for given steam flow rate
(d) It increases temperature range in the boiler, thus more thermal stresses are
- in the boiler
Answer a

Ques: The reheating of steam in a turbine
(a) increases the efficiency of the turbine
(b) increases the output power from the turbine
(c) reduces corrosion and erosion of turbine blades
(d) all of the above
Answer d

Ques: The following is not correct for reheating cycle of steam turbine
(a) It requires less floor space
(b) It increases the work done through the turbine
(c) It reduces the erosion of the turbine blades
(d) It increases the thermal efficiency of the plant
Answer a

Ques: In reheating cycle,
(a) fuel consumption is increased by 4 to %
(b) it is preferred for low capacity plants
(c) the complexity of operation and control increases
(d) all of the above
Answer C

Ques: The law which states that heat and work mutually convertible is known as
(b) first law of thermodynamics
(a) zeroth law of thermodynamics
(c) second law of thermodynamics
(d) third law of thermodynamics
answer b

Ques: According to first law of thermodynamics
(a) network can be produced during cycle without some heat supply.
(b) network cannot be produced during a cycle without some heat supply.
(c) network cannot be produced during a cycle with some heat supply.
(d) none of the above.
answer b

Ques: A perpetual motion machine of first kind (defined as a machine which produces power without consuming any energy) is impossible according to
(b) first law of thermodynamics
(a) zeroth law of thermodynamics
(c) second law of thermodynamics
(d) none of above
answer b

Ques: If all the variables of a stream are independent of time it is said to be in
(a) steady flow
(b) unsteady flow
(c) constant flow
(d) uniform flow
answer a

Ques: The first law of thermodynamics for steady flow
(a) energy entering-energy leaving a control volume +change in stored energy.
(b) heat energy + work done +change in internal energy
(c) heat energy-work done energy balance for a specified mass of fluid
Answer: a

Ques: A definite area or space where some thermodynamic process takes place is known
(a) thermodynamic cycle
(c) thermodynamic
(b) thermodynamic system process
(d) law of thermodynamic
Answer: b

Ques: In an open thermodynamic system,
(a) neither the heat and work nor the mass cross the boundary of the system
(b) heat and work cross the boundary of system but not mass.
(c) mass cross the boundary of system but not heat and work.
(d) both the heat and work as well as mass of working substances cross the boundary of the system.
Answer: d

Ques: A thermodynamic system is refereed to be an isolated system when there s transfer of across the system boundary
(a) only mass
(b) only heat and work
(c) both mass and energy
(d) neither mass nor energy
Answer: d

Ques: when two bodies are in equal temperature with third body they are also equal temperature with each other This statement known as
(a) zeroth law of thermodynamics
(b) first law of thermodynamics
(c) second law of thermodynamics
(d) third law of thermodynamics
Answer: a

Ques: A system having single phase is called:
(a) isolated system
(b) closed system
(c) homogeneous system
(d) heterogeneous system
Answer: c

Ques: Zeroth law of thermodynamics deals with
(a) conservation of energy
(b) conservation of mass
(c) entropy
(d) thermal equilibrium
Answer: d

Ques: First law of thermodynamics deals with
(a) conservation of mass
(b) conservation of energy
(c) thermal equilibrium
(d) principle of increase entropy
Answer: a

Ques: Second law of thermodynamics defines
(a) internal energy
(d) work
(b) entropy
(c) heat
Answer: b

Ques: Third law of thermodynamics defines
(a) internal energy
(b) absolute zero entropy
(c) heat
(d) work
Answer: b

Ques: which statement is not true for microscopic study of thermodynamics
(a)It is statistical thermodynamics
(b) This approach to thermodynamics is concerned with individual behavior of matter.
(c) The description of system is simple, only few properties are required.
(d) The behavior of the system is found by using statistical methods.
Answer: c

Ques: Which of the following is closed system?
(a) boiler
(b) compressor
(c) IC engine
(d) bomb calon meter
Answer: d

Ques: Which one of the properties given below is an intensive property of system?
(a) kinetic energy
(b) volume
(c) temperature
(d) enthalpy
Answer: c

Ques: which is not correct statement of a pure substance
(a) homogeneous in composition
(b) homogeneous in chemical aggregation.
(c) a mixture of oil and water is pure substance
(d) a mixture of ice and liquid water is pure substance.
Answer: c

Ques: which of one statement is not valid for quasi-static process
(a) reversible process
(b) iso thermal process is quasi-static process
(c)process is a succession of equilibrium states
(d) process is very fast
Answer: d

Ques: Which of one is not correct statement regards to heat and work
(a) naturally, heat flow from low temperature to high temperature.
(b) heat and work is path function from consider
(c) heat flow from system consider negative heat and work output system positive work.
(d)Work done in free expansion is zero.
Answer: a