2023 2024 Student Forum > Management Forum > Main Forum

 
  #2  
20th November 2014, 12:53 PM
Super Moderator
 
Join Date: Apr 2013
Re: BHEL Mechanical Engineering Exam Question Paper

Here is the list of few questions of BHEL Mechanical Engineering Exam Question Paper which you are looking for .

1)Unit of Entropy (J/kg K or kJ/kg K)?

2)A mass of 100kg is falling from a height of 1 m and penetrates the sand into for 1 m. What is the resistance force given by sand?

3)Ratio of specific heats of air ? (1.41)

4)A body weighs 3 kg in air. If it is submerged in a liquid, it weighs 2.5 kg. What is the specific gravity of the liquid ?

5)Two cars travell in same direction at 40 km/hr at a regular distance. A car comes in a opposite direction in 60km/hr. It meets each car in a gap of 8 seconds. What is the distance between them?

6)A simple problem involing in hoops stress. For sphere: M= [3/2]*p*V* [density of pressure vessel material/Maximum working stress it can tolerate] For Thin walled pressure walls: Hoops stress or stress in the radial direction =p*r/2t?

7) A problem in force calculation in a body moving in a inclined surface?

8)Composition of bronze?
ans. Copper+zinc.

9) Compostion of stainless steel.?
ans. iron+chromium+nickel+carbon.

10) CI is manifactured in which process?
ans. cupola process

11)What percentage of carbon is preset in pig iron?
ans. 4.5 to 6%.

12)Water is available at 10m height. What is the pressure available?
ans= pressure=density*g*height;
p=1000*9.81*10;
p=98100N/m2.

13)What will happen if the speed of the centrifugal pump doubles?

14)The unit eV is widely used in ?
ans. Nuclear and atomic physics.

15)What will happen to the resistance, when the diameter of the conductor is doubled?

16)The power comsumed by a electrical device is 1000W at 250V, What is the resistance in the device?
ans. Power= Voltage*current,
Current=Power/Voltage,
Current,I=1000/250=4
amps. V=IR,
Therefore R=250/4=62.5 ohms.

17)Why DC current is not used in transformer?

18)On what principle the sonar/ radar works?

19)Bending moment diagram for the UDL is in what shape?

20)Function of the distributor in petrol vehicles?
ans. Spark timing.

21)Which is not present in CI engines?
ans. carburrettor.

22)What will happen if one cylinder recieves more amount of fuel spray from injectors than other injectors?

23)Purpose of draft tube in hydraulic turbines?

ans. The purpose of a draft tube is toconvert some of the kinetic energy of the flow from the runner (the rotating part of the turbine) intopressure energy and thereby increase the efficiency ofthe hydro power turbine.

24)What is the effect or reheater in the gas turbine?

The advantage of reheater is significantly increased thrust; the
disadvantage is it has very high fuel consumption and inefficiency.

25)Problems involving with fricition coefficient.

26)Factor of safety = Yeild stress/Working stress.

27)Which is the example of non parallel power transmission (Universal coupling)?

28)For perpendicular shafts worm gear is used?

29)A planet gear with 25 teeth is meshed with a sun gear of 100 teeth. Both are connected using a arm. How many rotations are needed for planet gear to complete one rotation around the sun gear?

30)What is equivalent spring constant for spring in parallel?

31) Some questions was asked related to boundary layer and vortex flow.

32) 5 questions were asked in PERT, Process planning, Product planning, Break even analysis.

33)How are tungsten and sintered composite materials are machined?
(Electro Discharge Machining, EDM)
  #3  
29th May 2015, 04:48 PM
Unregistered
Guest
 
Re: BHEL Mechanical Engineering Exam Question Paper

Hello friend, here I am looking for the BHEL Mechanical Engineering Exam Question Paper so can you please provide me this?
  #4  
29th May 2015, 04:49 PM
Super Moderator
 
Join Date: Apr 2013
Re: BHEL Mechanical Engineering Exam Question Paper

Hello, as you need the BHEL Mechanical Engineering Exam Question Paper so here I am sharing this with you

BRANCH: MECHANICAL
1. Euler’s load for columns (end conditions)
2. Relation b/w longitudinal stress nd Hoops stress (thin cylindrical shell)
3. First atomic power plant in India?
4. Drawing paper sizes:A0,A1,A2,A3,A4
5. In an electrolytic soln conduction takes place by…….
6. Problem in natural nd induced frequency……
7. Stud diameter for Boilers in Thermal Power plant…..
8. Kinematic pair…..
9. Rake angle….
10. Double bucket is used in which turbine……
11. If original size of a drawing was reduced to half, what is the scale size……
12. TIG welding process is used for which Metal…….
13. Laser is produced from which of the following…..(ruby, diamond, titanium, gold)
14. 8085 microprocessor is what bit……(4,8,16,32)
15. Problem in friction…..
16. In shafts operating at very high temp what s the lubricant used…..
17. For mass production which of the following process is preferable…(process, product, line)
18. Dynamometer s used to measure……
19. In casting, the content of the facing sand used is,,,,,
20. Boundary layer property,,,,,,
21. Formula for two springs in series…..
22. Nu=f(Pr,Gr)
23. First law of thermodynamics….(Q=W+dE)
24. Transistors-(CE,CB) qns2
25. npn diodes,,,,dopin(2qns)
26. Power Factor(2 problems)
27. 1 qn from IC chip
28. Which s the universal gate among the following (AND,OR,NAND,Ex-OR)
29. Semiconductor Material among following…..(germanium,gold,copper,silica)
30. Current, 2 resistance in series,,,,find voltage,,,
31. In car battery Voltage used was….
32. Material used for making high speed bearings,,,,,


Tags
mechanical engineering

Quick Reply
Your Username: Click here to log in

Message:
Options

Thread Tools Search this Thread



All times are GMT +5. The time now is 07:29 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
SEO by vBSEO 3.6.0 PL2

1 2 3 4