2023 2024 Student Forum > Management Forum > Main Forum

 
  #1  
25th November 2014, 04:04 PM
Unregistered
Guest
 
Vacancies for mechanical engineering in IES

I have done B.Tech in mechanical engineering and want to apply for IES Exam so please tell me that which types of vacancies are available for mechanical engineers?
Similar Threads
Thread
UPSC Engineering Services Vacancies
Aeronautical Engineering after diploma in Mechanical Engineering
Electrical Engineering Fresher Job Vacancies
Job Vacancies in Engineering Colleges in Punjab
Indian Engineering Services Mechanical Engineering Syllabus
Indian Engineering Services Syllabus for Mechanical Engineering
Indian Engineering Service last year question papers of Mechanical Engineering
Vacancies in Engineering Colleges in Delhi
Indian Engineering Service previous year question papers of Mechanical Engineering
Jaypee University of Engineering & Technology Ph.D Mechanical Engineering Admission
After Completing Diploma in Mechanical Engineering Bachelor of Engineering
Admission in IP Engineering College Delhi for B.Tech Mechanical Engineering
Difference between Civil Engineering and Mechanical Engineering
Vacancies for B.Tech in Mechanical Engineering students
Graduate Aptitude Test in Engineering Mechanical Engineering previous year question p
Graduate Aptitude Test in Engineering syllabus of Mechanical Engineering
After Diploma Mechanical Engineering Admission in 2nd year aeronautical engineering
TNPSC Combined Engineering Service Exam last year papers of Mechanical Engineering
TNPSC Combined Engineering Service Exam syllabus of Mechanical Engineering
Syllabus of Indian Engineering Service Mechanical Engineering
  #2  
25th November 2014, 04:47 PM
Super Moderator
 
Join Date: Apr 2013
Re: Vacancies for mechanical engineering in IES

IES stands for Indian Engineering Services

Eligibility for IES Exam:
Candidate should be citizen of India

Should have at least bachelor's degree in Engineering (B.E./B.Tech./B.sc.) from a recognized university or equivalent.

M.Sc degree or its equivalent with Wireless Communications, Electronics, Radio Physics or Radio Engineering as special subjects also acceptable for certain posts only

Age limits
Age should be between 21–30 years

Age Relaxation:
Maximum of three years for OBC
Maximum of five years for Scheduled Caste or a Scheduled Tribe

Mechanical Engineering
Border Roads Engineering Service (Border Roads Organisation)
Central Electrical & Mechanical Engineering Service (Central Public Works Department)
Central Engineering Service (Ministry of Road Transport & Highways)
Central Power Engineering Service (Central Electricity Authority)
Central Water Engineering Service (Central Water Commission)
Corps of Electrical and Mechanical Engineers (EME), Indian Army
Indian Defence Service of Engineers (Military Engineer Services)
Indian Inspection Service (Directorate General of Supply and Disposals)
Indian Naval Armament Service (Directorate of Naval Armament)
Indian Naval Stores Service (Indian Navy)
Indian Ordnance Factories Service (IOFS)
Indian Railway Service of Mechanical Engineers
Indian Railway Stores Service
Indian Supply Service (Directorate General of Supply and Disposals)

Here I am giving you the details of last time vacancies of Mechanical Engineers from which you can get the idea of no. of posts

Mechanical Engineering Vacancies
Vacancies announced: 163 posts (General: 89, SC: 24, ST: 12, OBC: 38)
Candidates selected: 150 (General: 76, SC: 24, ST: 12, OBC: 38)
Candidates selected in reserve: 24 (General: 12, OBC: 12)

Syllabus of IES Mechanical Engineering

MECHANICAL ENGINEERING PAPER-I
(For both objective and conventional type papers)
1. Thermodynamics, Cycles and IC Engines, Basic concepts, Open and Closed systems. Heat and
work. Zeroth, First and Second Law, Application to non-Flow and Flow processes. Entropy, Availability,
Irreversibility and Tds relations. Claperyron and real gas equations, Properties of ideal gases and
vapours. Standard vapour, Gas power and Refrigeration cycles. Two stage compressor. C-I and S.I.
Engines. Pre-ignition, Detonation and Diesel-knock, Fuel injection and Carburation, Supercharging.
Turbo-prop and Rocket engines, Engine Cooling, Emission & Control, Flue gas analysis, Measurement
of Calorific values. Conventional and Nuclear fuels, Elements of Nuclear power production.
2. Heat Transfer and Refrigeration and Airconditioning. Modes of heat transfer. One dimensional
steady and unsteady conduction. Composite slab and Equivalent Resistance. Heat dissipation from
extended surfaces, Heat exchangers, Overall heat transfer coefficient, Empirical correlations for heat
transfer in laminar and turbulent flows and for free and forced Convection, Thermal boundary layer
over a flat plate. Fundamentals of diffusive and connective mass transfer, Black body and basic
concepts in Radiation, Enclosure theory, Shape factor, Net work analysis. Heat pump and Refrigeration
cycles and systems, Refrigerants. Condensers, Evaporates and Expansion devices, Psychrometry,
Charts and application to air conditioning, Sensible heating and cooling, Effective temperature,
comfort indices, Load calculations, Solar refrigeration, controls, Duct design.
3. Fluid Mechanics.
Properties and classification of fluids, Manometry, forces on immersed surfaces, Center of pressure,
Buoyancy, Elements of stability of floating bodies. Kinematics and Dynamics.
Irrotational and incompressible. Inviscid flow. Velocity potential, Pressure field and Forces on
immersed bodies. Bernoulli's equation, Fully developed flow through pipes, Pressure drop calculations,
Measurement of flow rate and Pressure drop. Elements of boundary layer theory, Integral approach,
Laminar and tubulent flows, Separations. Flow over weirs and notches. Open channel flow, Hydraulic
jump. Dimensionless numbers, Dimensional analysis, Similitude and modelling. One-dimensional
isentropic flow, Normal shock wave, Flow through convergent - divergent ducts, Oblique shock-wave,
Rayleigh and Fanno lines.
4. Fluid Machinery and Steam Generators.
Performance, Operation and control of hydraulic Pump and impulse and reaction Turbines, Specific
speed, Classification. Energy transfer, Coupling, Power transmission, Steam generators Fire-tube and
water-tube boilers. Flow of steam through Nozzles and Diffusers, Wetness and condensation. Various
types of steam and gas Turbines, Velocity diagrams. Partial admission. Reciprocating, Centrifugal and
axial flow Compressors, Multistage compression, role of Mach Number, Reheat, Regeneration,
Efficiency, Governance.
MECHANICAL ENGINEERING PAPER - II
(For both objective and conventional type papers)
5. THEORY OF MACHINES:
Kinematic and dynamic analysis of planer mechanisms. Cams. Gears and gear trains. Flywheels.
Governors. Balancing of rigid rotors and field balancing. Balancing of single and multicylinder engines,
Linear vibration analysis of mechanical systems. Critical speeds and whirling of shafts Automatic
controls.
6. MACHINE DESIGN :
Design of Joints : cotters, keys, splines, welded joints, threaded fasteners, joints formed by
interference fits. Design of friction drives : couplings and clutches, belt and chain drives, power
screws.
Design of Power transmission systems : gears and gear drives shaft and axle, wire ropes.
Design of bearings : hydrodynamics bearings and rolling element bearings.
7. STRENGTH OF MATERIALS
Stress and strain in two dimensions, Principal stresses and strains, Mohr's construction, linear elastic
materials, isotropy and anisotropy, stress-strain relations, uniaxial loading, thermal stresses. Beams :
Bending moment and shear force diagram, bending stresses and deflection of beams. Shear stress
distribution. Torsion of shafts, helical springs. Combined stresses, thick-and thin-walled pressure
vessels. Struts and columns. Strain energy concepts and theories of failure.
8. ENGINEERING MATERIALS :
Basic concepts on structure of solids. Crystalline maferials. Detects in crystalline materials. Alloys and
binary phase diagrams. Structure and properties of common engineering materials. Heat treatment of
steels. Plastics, Ceramics and composite materials. Common applications of various materials.
9. PRODUCTION ENGINEERING :
Metal Forming : Basic Principles of forging, drawing and extrusion; High energy rate forming; Powder
metallurgy.
Metal Casting : Die casting, investment casting, Shall Moulding, Centrifugal Casting, Gating & Riser
design; melting furnaces.
Fabrication Processes : Principles of Gas, Arc, Shielded arc Welding; Advanced Welding Processes,
Weldability: Metallurgy of Welding.
Metal Cutting : Turning, Methods of Screw Production, Drilling, Boring, Milling, Gear Manufacturing,
Production of flat surfaces, Grinding & Finishing Processes. Computer Controlled Manufacturing
Systems-CNC, DNC, FMS, Automation and Robotics.
Cutting Tools Materials, Tool Geometry, Mechanism of Tool Wear, Tool Life & Machinability;
Measurement of cutting forces. Economics of Machining. Unconventional Machining Processes. Jigs and
Fixtures. Fits and tolerances, Measurement of surface texture, Comparators Alignment tests and
reconditioning of Machine Tools.
10. INDUSTRIAL ENGINEERING :
Production Planning and Control : Forecasting - Moving average, exponential smoothing, Operations,
scheduling; assembly line balancing, Product development, Break-even analysis, Capacity planning,
PERT and CPM.
Control Operations : Inventory control ABC analysis, EOQ model, Materials requirement planning. Job
design, Job standards, Work measurement, Quality Management - Quality analysis and control.
Operations Research : Linear Programming - Graphical and Simplex methods, Transportation and
assignment models. Single server queueing model.
Value Engineering : Value analysis for cost/value.
11. ELEMENTS OF COMPUTATION :
Computer Organisation, Flow charting, Features of Common computer Languages - FORTRAN, d Base
III, Lotus 1-2-3, C and elementary Programming.


Tags
mechanical engineering

Quick Reply
Your Username: Click here to log in

Message:
Options

Thread Tools Search this Thread



All times are GMT +5. The time now is 03:41 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
SEO by vBSEO 3.6.0 PL2

1 2 3 4