Syllabus for TANCET ME exam

Give me information about syllabus for ME course examination of Tamil nadu common entrance examination ?

[Quick Sam]

Here I am giving you information about syllabus for ME course examination of Tamil nadu common entrance examination.

TANCET 2014 Syllabus for ME:
Engineering Mathematics
Engineering and Science pattern
Logical Reasoning & Computer Awareness

TANCET (EC) Electronics and Communication Engineering Syllabus
i). Circuit Analysis: DC Circuit analysis, Thevenin’s and Norton’s equivalent circuits, Sinusoidal steady
state analysis, Transient and resonance in RLC circuits. Electronic Devices: Diodes, Bipolar Junction Transistors, FET, MOSFET, UJT, Thyristor. Electronic Circuits: Small signal amplifiers using BJT and FET devices, Large signal amplifiers, Power supplies, Feed back amplifiers, Oscillators, Pulse shaping circuits. Digital Electronics: Logic gates, Combinational circuits, Sequential circuits. Linear Integrated Circuits: Operational amplifiers and its applications, PLL, Voltage regulators, A/D and D/A converters. Measurements and Instrumentation: Transducers, Digital Instruments, Display and Recording systems. Microprocessor and its applications: Microprocessors-8085 and 8086 architectures and interfaces, Micro-controller and applications.

ii). Electromagnetic Fields: Static Electric and Magnetic fields, Time varying Electric and Magnetic fields, Maxwell equations. Transmission Lines and Networks: Transmission line equations, impedance matching, Filters. EM waves and waveguides: Guided waves, Rectangular and cylindrical waveguides. Antennas and Propagation: Aperture antennas, arrays, Propagation of radio waves. Microwave Engineering: Microwave tubes, semiconductor devices, Passive components, Microwave measurements.

iii). Communication Theory and Systems: AM, FM and PM, Sampling and Quantisation, PCM, DM, ADM, Multiplexing. Digital Communication: Base band signaling, Band pass signaling, Error control coding, Spread spectrum techniques. Computer Communication Networks: Definition of layers, data link protocols, Network interconnection. Message routing technologies, End-End protocols. Optical Communication: Optical Fibers, optical transmitters and receivers.

iv). Signals and Systems: Continuous time signals and systems-Fourier Transform, Laplace transform, Discrete time signals and systems-DTFT, DFT, Z-Transform. Digital Signal Processing: IIR and FIR filters, Realisation and implementation, Quantisation effects. Control Systems: Transfer function, Time and frequency response analysis, Stability analysis, state variable analysis

Can you provide me the Syllabus for TANCET or Tamil Nadu Common Entrance Test ME (Mechanical Engineering) exam as my cousin need s it for preparation?

[Raman Vij]

Tamil Nadu Common Entrance Test (TANCET) is for those applicants who wish for getting admission in MBA / MCA / ME / M.Tech Civil, ME, ECE, EE etc.

TANCET Mechanical Engineering Syllabus

i) Mechanics : Statics of Particles, Equilibrium of Rigid Bodies, Properties of Surfaces and Solids, Dynamics of Particles, Friction and Elements of Rigid Body Dynamics – Basics of Mechanisms, Kinematics of Linkage Mechanisms, Kinematics of Cam Mechanisms, Gears and Gear Trains, Friction, Force Analysis, Balancing and Vibration.

ii) Strength of Materials and Design : Stress, Strain and Deformation of Solids, Transverse Loading on Beams and Stresses in Beams, Deflection of Beams, Energy Principles, Thin cylinders and spherical resells Torsion – Fundamentals of Design for Strength and Stiffness of Machine Members, Design of Shafts and Couplings, Design of Fasteners and Welded Joints, Design of Springs and Engine Parts, Design of Engine parts, Bearings and Flywheels, Design of Transmission Systems for Flexible Elements, Spur Gears and Parallel Axis Helical Gears, Bevel, Worm Gears and Crossed Helical Gears, Design of Gear Boxes, Design of Cam, Clutches and Brakes.

iii) Material Science and Metallurgy : Constitution of Alloys and Phase Diagrams, Heat Treatment, Ferrous and Non ferrous Metals, Non-Metallic Materials, Mechanical Properties and Testing, Crystal Defects and Strengthening of Materials Conducting and Semiconducting Materials, Magnetic and Dielectric Materials, Nuclear Physics, Superconducting and New Engineering Materials.

iv) Thermodynamics : Basic Concepts and First Law, Second Law, Entropy and Availability, Properties of Steam, Psychrometry, Ideal and Real Gases and Thermodynamic Relations, Fuels and Combustion, – Gas Power Cycles, Stream Turbines, Internal Combustion Engines, Internal Combustion Engines Testing and Performance, Gas Turbines, – Steam Nozzle, Air Compressor, Refrigeration and Air-Conditioning, Boilers, Cogeneration and Waste Heat
Recovery.

v) Heat Transfer : Conduction, Phase Change Heat Transfer and Heat Exchangers, Radiation, Mass Transfer-Refrigeration Cycle, Refrigerants, System Components and Balancing, Psychrometry, Air Conditioning Systems, Unconventional Refrigeration Cycles.

vi) Production Technology : Foundry Technology, Hot & Cold Working, Forging, Advances in Forming Process, Principles and Applications of Joining Processes, Theory of Metal Cutting, Centre Lathe and special Purpose Lathes, Reciprocating Machines, Milling Machines and Gear Cutting, Abrasive Process, Broaching, CNC Machine Tools and Part Programming.

vii) Automotive Engines : Engine Construction and Operation, SI Engine Fuel System, Cooling and Lubrication System, Combustion and Combustion Chambers, Two Stroke Engines, Diesel Engine Basic Theory, Fuel Injection System, Air Motion, Combustion and Combustion Chambers, Supercharging and Turbocharging, Diesel Engine Testing and Performance.

viii) Automotive Transmission and Pollution : Clutch and Gear Box, Hydrodynamic Drive, Planetary Gear Boxes, Automatic Transmission Applications, Hydrostatic and Electric Drive – S.I. Engine Combustion and Emissions, CI Engine Combustion and Emissions, Control Techniques for Reduction of SI and CI Engine Emission, Test Procedure & Instrumentation for Emission Measurement and Emission Standards.

ix) Aerodynamics : Basic Fluid Mechanics, Two Dimensional Inviscid Incompressible Flow, Airfoil Theory, Subsonic Wing Theory, Laminar and Turbulent Flow, Fundamental Aspects of Compressible Flow, Shock and Expansion Waves, Two Dimensional compressible Flow, High Speed Flow Over Airfoils, Wings and Airplane Configuration.

x) Aerospace Propulsion : Fundamentals of Gas Turbine Engines, Subsonic and Supersonic Inlets for Jet Engines, Centrifugal and Axial Flow Compressors, Combustion Chambers for Jet Engines, Turbines for Jet Engines, Nozzles for Jet Engines, Ramjet Propulsion, Hypersonic Airbreathing Propulsion, Chemical Rocket Propulsion, Advanced Propulsion Techniques.

Paper Pattern:

The Question Paper of the ME/ is divided into two parts namely-

Part I: Engineering Mathematics -30 questions (30 marks)

Part II: Basic Engineering & Sciences- 45 questions (30 marks)

Part III: this part is not for the M.E course admissions- 40/45 questions (40 marks)

The candidates will be deducted one- fifth or one-fourth marks for each incorrect answer. The candidates will secure 1 mark for each correct answer marked by him/her.

Normalization of Marks for M.E
The entrance test question paper for M.E has two common parts namely:

Part – I Engineering Mathematics

Part – II Basic Engineering & Sciences

Part – III meant for different disciplines.

On evaluation, the mean (m) mark and the standard deviation (s) of raw marks (r) may vary from discipline to discipline under Part – III. Marks are normalized using the formula

Normalized marks = 40 + ( 10/s ) ( r – m )