#1
1st June 2015, 04:21 PM
| |||
| |||
SSC Model Question Papers for Junior Engineer Civil
My brother is doing preparation for the SSC Junior Engineers Civil & Electrical Examination. So I want to download the model question paper for Junior Engineers Civil & Electrical Examination. Will you please provide me some link from where I can download its old question paper?
|
#2
3rd July 2018, 07:43 AM
| |||
| |||
Re: SSC model question papers for junior engineer civil
Can you provide me the previous year question paper for SSC (Staff Selection Commission) Junior Engineers (JE) (Civil Engineering) as I need it for preparation of the exam?
|
#3
3rd July 2018, 07:44 AM
| |||
| |||
Re: SSC model question papers for junior engineer civil
The previous year question paper for SSC (Staff Selection Commission) Junior Engineers (JE) (Civil Engineering) is as follows: QID :- Which of the following defect appears due to presences of alkalies in the bricks? Options: 1) Bloating 2) Black core 3) Cracks 4) Efflorescence Correct Answer: Efflorescence QID :- For which of the following process Boucherie process is used? Options: 1) Manufacturing of bricks 2) Manufacturing of cement 3) Production of clay tiles 4) Treatment of green timber Correct Answer: Treatment of green timber QID : - What is the percentage content of asphalt in the cut-back asphalt? Options: 1) 10% 2) 30% 3) 50% 4) 80% Correct Answer: 80% QID :- In which of the following test of bitumen Ring and Ball apparatus is used? Options: 1) Penetration test 2) Softening point test 3) Viscosity test 4) Flash and fire point test Correct Answer: Softening point test QID :- The defect in timber that causes longitudinal separation of woods between the annular rings is known as_______. Options: 1) knots 2) rind gall 3) shakes 4) twisted fibers Correct Answer: shakes QID :- Which of the seasoning method is adopted for the rapid seasoning of timber on large scale to obtain any desired moisture content? Options: 1) Air seasoning 2) Boiling process 3) Kiln seasoning 4) Water seasoning Correct Answer: Kiln seasoning QID :- What is the gel-space ratio of a sample of concrete, if the concrete is made with the 600 g of cement with the water-cement ratio of 0.65? Options: 1) 0.012 2) 0.432 3) 0.678 4) 0.874 Correct Answer: 0.678 QID :- The concrete sample is cured at 15 degree Celsius for 28 days. If the origin temperature is taken as -11 degree Celsius, what is the maturity (degree Celsius days) of concrete sample? Options: 1) 112 2) 308 3) 402 4) 728 Correct Answer: 728 QID :- The ingredient of paint which are used to hide the surface irregularities and imparts color is known as_______. Options: 1) adultrants 2) drier 3) pigments 4) solvents Correct Answer: pigments QID : - If the least lateral dimension of aggregate is less than 0.6 times of its mean dimension, the aggregate is classified as_____. Options: 1) angular 2) flaky 3) irregular 4) rounded Correct Answer: flaky QID :- Explosive required for blasting is measured in _____. Options: 1) cubic meter 2) explosive power 3) energy released 4) kilograms Correct Answer: kilograms QID :- Which of the following is the correct statement for length of the long wall as one move from earthwork to brick work in super structure in long and short wall method? Options: 1) Its value decreases 2) Its value depends upon the length of the wall. 3) Its value increases. 4) Its value remains same. Correct Answer: Its value decreases QID :- Calculate an approximate estimate (Rs.) of the building with total plinth area of the building is 500 square meters. The rate of the plinth area is Rs. 3,000 per square meters. The costs of the water supply and contingencies are 7% and 5% of cost of construction respectively. Options: 1) 1500000 2) 1650000 3) 1680000 4) 1870000 Correct Answer: 1680000 QID :- Calculate the cost of the plastering required for a wall of 4 m long, 3.5 m high and 300 mm thick, if the rate of plastering is Rs. 12 per square meter. Options: 1) 101 2) 168 3) 336 4) 423 Correct Answer: 336 QID :- Which of the following is the unit of measurement for the sills of windows? Options: 1) Cubic meter 2) Meter 3) Number 4) Square meter Correct Answer: Number QID :- Which of the following area is included in the plinth area of the building? Options: 1) Area of the lofts. 2) Area of barsati at terrace level. 3) Cornices 4) Tower projecting above terrace level. Correct Answer: Area of barsati at terrace level. QID :- Which of the following method is used for estimation of depreciation of building? Options: 1) Constant percentage method 2) Direct comparison method 3) Logistic curve method 4) Rental method Correct Answer: Constant percentage method QID :- Capitalized value of a property is the product of _____. Options: 1) annual income and annuity 2) annual income and interest 3) annual income and sinking fund 4) annual income and years purchase Correct Answer: annual income and years purchase QID :- Calculate the total quantity (cubic meter) of the coarse aggregate required for an isolated rectangular footing of size 3 m x 2 m, if 1 : 2 : 4 cement concrete is used. The depth of the footing is 600 mm. Options: 1) 2.05 2) 2.46 3) 3.16 4) 3.82 Correct Answer: 3.16 QID :- What is the actual size (mm) of the standard modular brick as per Indian Standards? Options: 1) 190 x 90 x 90 2) 200 x 90 x 90 3) 200 x 100 x 100 4) 229 x 114 x 76 Correct Answer: 190 x 90 x 90 QID :- Which of the following statement is not correct for the principle of surveying? Options: 1) Location of a point with respect to two references 2) Major control points are measured with lower degree of precision. 3) Minor control points are measured with higher degree of precision 4) Working from part to whole Correct Answer: Working from part to whole QID : - Which one of the following set of internal angles (degree) of a triangle does not show well condition triangle? Options: 1) 20, 90, 70 2) 25, 45,110 3) 40, 125, 15 4) 35, 80, 65 Correct Answer: 35, 80, 65 QID :- The back sight reading taken from a level at a bench mark is 1.56 m and a fore sight at a point A is taken on an inverted staff is 1.65 m. Calculate the reduced level of the point A, if the reduced level of the bench mark is 150 m. Options: 1) 146.79 2) 149.91 3) 152.8 4) 153.21 Correct Answer: 153.21 QID : - The ratio of focal length of the objective to stadia interval is called _____. Options: 1) additive factor 2) multiplying factor 3) staff intervals 4) subtractive factor Correct Answer: multiplying factor QID : - Calculate the additive and multiplying constant, if the focal length of the objective glass is 250 mm, stadia intercept is 2 mm and distance of the instrument axis from the center of the object glass is 190 mm. Options: 1) 95, 440 mm 2) 125 , 440 mm 3) 440 , 95 mm 4) 440 , 125 mm Correct Answer: 440 , 125 mm QID :- What is the function of the plumbing fork in plane table surveying? Options: 1) Used for centering of plane table. 2) Used for leveling the plane table 3) Used for orientation of plane table. 4) Used for sighting the object. Correct Answer: Used for centering of plane table. QID : - The vernier scale in which 10 divisions of the viernier scale is equal to 9 divisions of the main scale is called _____. Options: 1) direct vernier 2) double vernier 3) extended vernier 4) retrograde vernier Correct Answer: direct vernier QID :- The maximum error (mm) on the drawing should not be greater than _____. Options: 1) 0.01 2) 0.025 3) 0.25 4) 0.1 Correct Answer: 0.25 QID :- Which of the following is true for the correction for the curvature? Options: 1) It is proportional to the distance between the staff and instrument. 2) It is always negative and proportion to square of distance between the staff and instrument 3) It is always positive and proportion to square of distance between the staff and instrument 4) It is always positive and proportion to the distance between the staff and instrument Correct Answer: It is always negative and proportion to square of distance between the staff and instrument QID :- The void ratio of a soil sample is given by 0.58. What is the porosity of soil sample? Options: 1) 0.157 2) 0.367 3) 0.524 4) 0.602 Correct Answer: 0.367 QID : - Which of the following bonding is responsible to combine the silica-gibbsite sheet in kaolinite clay mineral? Options: 1) Covalent bond 2) Hydrogen bond 3) Ionic bond 4) Polar covalent bond Correct Answer: Hydrogen bond QID :- The maximum dry density and optimum moisture content of a soil is given by 1.65 gm/cc and 20.5% respectively. What is the percentage of air content of soil at OMC, if the specific gravity of particles is given by 2.65? Options: 1) 10.4 2) 15.5 3) 26.8 4) 35.7 Correct Answer: 10.4 QID :- Which of the following type of roller is most suitable for proof rolling subgrades and for finishing operation of fills with clayey or sandy soils? Options: 1) Pneumatic rubber tired roller 2) Sheepsfoot roller 3) Smooth wheel roller 4) Vibratory roller Correct Answer: Smooth wheel roller QID : - The value obtained from dividing limiting value of circulation by area of closed contour is known as_______. Options: 1) potential function 2) stream function 3) vorticity 4) None of these Correct Answer: vorticity QID :- In which of the following case flow net can not be drawn? Options: 1) Irrotational flow 2) Steady flow 3) When flow is governed by gravity 4) When flow is not governed by gravity Correct Answer: When flow is governed by gravity QID :- The hydraulic radius and cross-sectional area of a channel is given by 4.5 m and 18.5 sq.m respectively. What is the wetted perimeter (m) of channel? Options: 1) 4.11 2) 10.5 3) 18.5 4) 83.3 Correct Answer: 4.11 QID :- The water is flowing through 800 m long circular pipe of diameter 30 cm with the velocity of 0.26 m/s. The friction factor for the pipe is given as 0.016. What is the head loss (cm) in the pipe due to friction? Options: 1) 5.5 2) 14.7 3) 21.3 4) 35.6 Correct Answer: 14.7 QID :- If at the particular instant of time, the velocity of flow does not change with location over a specific region, the flow is called as_____. Options: 1) steady flow 2) unsteady flow 3) uniform flow 4) non-uniform flow Correct Answer: uniform flow QID : - Which of the following statement is correct for sprinkler irrigation method? Options: 1) It is used for rice and jute. 2) It is used for the soil has very low infiltration rate. 3) It is best suitable for very light soil. 4) It requires borders and field channel. Correct Answer: It is best suitable for very light soil. QID :- Which of the following is correct statement for the cross slope of the shoulder? Options: 1) It is 1% flatter than the cross slope of pavement. 2) Its minimum value is 2%. 3) It is 0.5% steeper than the cross slope of the pavement 4) Its value is equal to the cross slope of pavement Correct Answer: It is 0.5% steeper than the cross slope of the pavement QID : - Calculate the safe stopping sight distance for a design speed of 60 km/h for two way traffic on a single lane road. The reaction time of driver is 2.5 sec. Options: 1) 82.21 2) 136.23 3) 164.42 4) 674.24 Correct Answer: 164.42 QID :- What is the theoretical oxygen demand (mg/l) of a glucose solution of concentration 500 mg/l? Options: 1) 250.33 2) 380.65 3) 533.33 4) 650.21 Correct Answer: 533.33 QID :- The most economical section for a column is Options: 1) rectangular 2) solid round 3) flat strip 4) tubular section Correct Answer: tubular section QID - If the unsupported length of a stanchion is 4 meters and least radius of gyration of its cross-section is 5, the slenderness ratio of the stanchion is Options: 1) 60 2) 70 3) 80 4) 90 Correct Answer: 80 QID : - A column splice is used to increase Options: 1) length of the column 2) strength of the column 3) cross-sectional area of the column 4) None of these Correct Answer: length of the column QID :- A structural member subjected to tensile force in a direction parallel to its longitudinal axis, is generally known as Options: 1) a tie 2) a tie member 3) a tension member 4) All option are correct Correct Answer: All option are correct QID :- A major beam in a building structure is known as Options: 1) a girder 2) a floor beam 3) a main beam 4) All option are correct Correct Answer: All option are correct QID :- In rolled steel beams, shear force is mostly resisted by Options: 1) web only 2) flanges only 3) web and flanges together 4) None of these Correct Answer: web only QID - For a cantilever beam of length L built-in at the support and restrained against torsion at the free end, the effective projecting length 'l' is Options: 1) l = 0.7L 2) l = 0.75L 3) l = 0.85L 4) None of these Correct Answer: l = 0.75L QID : - Pick up the correct statement from the following: Options: 1) The steel beams placed in plain cement concrete are known as reinforced beams 2) The filler joists are generally continuous over three supports only 3) Continuous fillers are connected to main beams by means of cleat angles 4) Continuous fillers are supported by main steel beams Correct Answer: Continuous fillers are supported by main steel beams QID :- Concrete mainly consists of Options: 1) cement 2) aggregates 3) admixture 4) All option are correct Correct Answer: All option are correct QID : - A concrete using an air entrained cement Options: 1) has strength less than 10% to 15% 2) has more resistance to weathering 3) is more plastic and workable 4) is free from segregation and bleeding Correct Answer: is more plastic and workable QID :- of keeping concrete wet to enable it to attain full strength is known as:- Options: 1) curing 2) wetting 3) drenching 4) quenching Correct Answer: curing QID :- Segregation is responsible for Options: 1) honey-combed concrete 2) porous layers in concrete 3) surface scaling in concrete 4) All option are correct Correct Answer: All option are correct QID :- Wp and Wf are the weights of a cylinder containing partially compacted and fully compacted concrete. If the compaction factor (Wp/Wf ) is 0.95, the workability of concrete is Options: 1) extremely low 2) very low 3) low 4) high Correct Answer: high QID : The process of hardening the concrete by keeping its surface moist is known Options: 1) placing 2) wetting 3) curing 4) compacting Correct Answer: curing QID :- Pick up the correct statement from the following Options: 1) There should not be any loss of cement from the charged drum of the mixer 2) Cement should be mixed for at least one minute 3) 10% of water is placed in the rotating drum before adding dry material 4) All option are correct Correct Answer: All option are correct QID :- The final operation of finishing floors is known as Options: 1) floating 2) finishing 3) troweling 4) All option are correct Correct Answer: troweling QID :- Expansion joints are provided if the length of concrete structures exceeds Options: 1) 10 m 2) 15 m 3) 25 m 4) 45 m Correct Answer: 45 m QID : - A flaky aggregate is said to be elongated if its length is Options: 1) equal to the mean size 2) twice the mean size 3) thrice the mean size 4) four times the mean size Correct Answer: twice the mean size QID :- For the construction of cement concrete floor, the maximum permissible size of aggregates is Options: 1) 4 mm 2) 6 mm 3) 8 mm 4) 10 mm Correct Answer: 10 mm QID : - Sand requiring a high water cement ratio, belongs to Options: 1) Zone I 2) Zone II 3) Zone III 4) Zone IV Correct Answer: Zone I QID :- The maximum amount of dust which may be permitted in aggregates is Options: 1) 5% of the total aggregates for low workability with a coarse grading 2) 10% of the total aggregates for low workability with a fine grading 3) 20% of the total aggregates for a mix having high workability with fine grading 4) All option are correct Correct Answer: All option are correct QID :- The cement becomes useless if its absorbed moisture content exceeds Options: 1) 0.01 2) 0.02 3) 0.03 4) 0.05 Correct Answer: 0.05 QID :- For concreting the surface of the runways, roads and pavements, the aggregate impact value shall not exceed by weight Options: 1) 0.2 2) 0.25 3) 0.3 4) 0.45 Correct Answer: 0.3 QID :- Pick up the correct statement from the following Options: 1) Density of normal concrete is about 2400 kg per cubic metre 2) Density of light weight concrete is about 1900 kg per cubic metre 3) Density of heavy concrete is about 3580 kg per cubic metre 4) All option are correct Correct Answer: All option are correct QID :- A sample of cement is said to be sound when it does not contain free Options: 1) lime 2) silica 3) iron oxide 4) alumina Correct Answer: lime QID :- Consider the following statements regarding aggregates: 1. Dry aggregates absorb water from the mixing water and thus affect the workability 2. Aggregates containing surface moisture contribute extra 3. The free moisture content in fine aggregate results in reduction of volume 4. The free moisture content in coarse aggregate results in bulking of volume. Of these statements: Options: 1) Statements 1 and 2 are correct 2) Statements 2 and 3 are correct 3) Statements 3 and 4 are correct 4) Statements 1 and 4 are correct Correct Answer: Statements 1 and 2 are correct QID : - If the permissible compressive and tensile stresses in a single reinforced beam are 50 kg/cm2 and 1400 kg/cm2 respectively and the modular ratio is 18, the percentage are At of the steel required for an economic section, is Options: 1) 0.496% 2) 0.596% 3) 0.696% 4) None of these Correct Answer: 0.696% QID : - The maximum shear stress (qmax) in a rectangular beam is Options: 1) 1.25 times the average 2) 1.50 times the average 3) 1.75 times the average 4) 2.0 times the average Correct Answer: 1.50 times the average QID :- For M 150 mix concrete, according to I.S. specifications, local bond stress is Options: 1) 5 kg/cm2 2) 10 kg/cm2 3) 15 kg/cm2 4) 20 kg/cm2 Correct Answer: 10 kg/cm2 |