2023 2024 Student Forum > Management Forum > Main Forum

 
  #2  
29th September 2014, 02:08 PM
Super Moderator
 
Join Date: Apr 2013
Re: ONGC GT Mechanical Engineering Question Paper

Here is the list of few questions of ONGC GT Mechanical Engineering exam paper which you are looking for .

1.aspect ratio in TV is width to height.

2. Adsl download rate is high compare to upload.

3.110 is class C in IP address.

4. if sun near to earth it is called ?

5.what is indicted the arrow head in transistor ?

6. if 100 battery of 9 volt is connect in parallel the what is output voltage ?

7.question related to satellite orbit

8.pcm,dm.dpcm technique

9.thyresistor

10. Carrier SYNCHRONIZATION not needed in QPSK,PSK,FSK?

11.CRO AND SCR

12.LIJJAJOUS pattern

13.laser is produce white light due to ?

14.wein bridge is use to measure of frequency.

15.radar system is using multiple of 16 then what is the multiplier

a)2 b)4 c)8 d)16

16.x= ab +bc is having how many how's in the truth table?

17.1 nepar=_ db

18. resolution of 6 bit is ?

19. Find correct parity as odd parity : Rightmost bit as parity bit : 1111111 1 , 0011010 1 , 1100110 1 , 0000000 0.

20.slew rate

21.fetch cycle

22.voltmeter sensitivity is measure in ?

23.microcontroller is having?

24.pointer

25.tunnel diode

26.BCD to binary converter

27.baud rate and bit rate which is grater ?

28.ideal op amp is having _i/p , _o/p , _bandwidth ?

29.IC 555 timer is having how many flip flop and comparator

31. Modulation index increased from 0 to 1 . Transmitted power now ?

32. De-emphasis is used because

33. Voltage gain of emitter follower : <=1 , =1 , >=1 , cannot say

34. CRO uses which method of focusing

35. Positive Feedback is same as : degeneration , regeneration

36. Lowest Efficiency in Power AMPLIFIER IS CLASS A , B , AB , C ?

37. 2 heater 1000W, 250V connected in series in 250V , 50HZ AC mains. Power drawn =?

38. HTTP = stateful/stateless protocol ?

39.which Layer responsible for delivery of packet from node to node ?

40. Difference between controlled variable and desired value of process control system

41. Why differentiator is not part of control system : Increases input noise , increases error , reduces gain, reduces damping

42 Which is analog : DCM , DM , DPCM , PWM

43. Identical Telephone no. under different exchanges are distinguished by : Modulation indices , language digit , access digit , area code

44. Common ckt in Freq Hopp Spread Spectrum and Direct Seq Spread Spectrum : correlator , Freq Synthesizer , Sweep Generator , Pseudo Random Noise Code Generator

45. Minimum Bwto transmit 56 kbps with no noise ?

46. Minimum Bwto transmit 56 kbps with no noise ?

47. f = 10 kHz sampled at Nyquist rate time int B/W 2 success samples ?

48. Find correct parity as odd parity : Rightmost bit as parity bit : 1111111 1 , 0011010 1 , 1100110 1 , 0000000 0

49. Dynamic memory cell store data in : register , capacitor

50. +0.5 V in TTL logic is : high , low , undefined , high impedance


Tags
mechanical engineering

Quick Reply
Your Username: Click here to log in

Message:
Options




All times are GMT +5. The time now is 02:50 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
SEO by vBSEO 3.6.0 PL2

1 2 3 4