2023 2024 Student Forum > Management Forum > Main Forum

 
  #2  
18th February 2016, 03:53 PM
Super Moderator
 
Join Date: Apr 2013
Re: MPPSC Syllabus for Electrical Engineering

Madhya Pradesh Public Services Commission (MPPSC) conducts a State Engineering Service Examination for recruitment of vacant posts of Engineer in Civil, Electrical, Mechanical and Agriculture.

Exam Pattern : Exam Pattern for the MPPSC Engineer Pre Written Exam is as Follows :-

► The Written Exam will be Multiple Choice Objective Type.
► There will be 2 papers in written exam.
► Minimum Qualifying marks will be 40% marks and for SC/ST/OBC 30% marks.

Syllabus for the Electrical Engineering Exam:

ELECTRICAL ENGINEERING PAPER - I
1. Circuit theory

Circuit Components, Network graphs, KCL, KVL, Circuit analysis methods: Nodal analysis, mesh analysis, basic network theorems; transient analysis : RL, RC and RLC Circuits; sinusoidal steady state analysis, resonance, Quality factor, balanced three phase circuit analysis. Frequency domain analysis Laplace's transform, Fourier series (trigonometric & exponential). two port networks and their various parameters; Poles and Zeros driving point & transfer function. Passive filter design theory.
2. Electro Magnetic field Theory and Materials
Electrostatic and Magneto static field Laplace's and Poisson's equations, Boundary value problems and solutions; Maxwell's equation,Electromagnetic wave propagation : Reflection and refraction of plane waves. Poynting vector, wave propagation through dielectrics and conductors. Electrical/electronic behaviour of materials :conductivity; free-electrons and band-theory; intrinsic and extrinsic semi-conductor, p-n junction; solar cells, super-conductivity. Dielectric behaviour of materials : polarization phenomena; piezoelectric phenomena. Magnetic material:, superconductivity.
3. Measurement and Instrumentation
Error analysis, Measurement of current, voltage, power, energy, power factor, resistance, inductance, capacitance and frequency Analysis of Bridges. Electronic measuring instruments: Multimeter, CRO, digital volt meter, frequency counter, Q-meter. transducers, measurements of non-electrical quantities by electrical methods, measurement of displacement, temperature, velocity, pressure, Signal conditioning, Date acquisition system.
4. Analog and Digital Electronics
Characteristics and equivalent Circuits (for small & large signals) of Diode, BJT, JFET and MOSFET Clipping, clamping and rectifiercircuits, Biasing and bias stability. Amplifiers : single and multi-stage, differential, operational, feedback and power. Analysis of amplifiers; frequency-response of amplifiers. OPAMP circuits. Filters; sinusoidal oscillators : criterion for oscillation; single-transistor and OPAMP configurations. Function generators and wave-shaping circuits. Power supplies. Boolean Algebra, Boolean function minimization. Logic gates, Combinatorial Circuits : arithmetic circuits, code converters. multiplexers and decoders, sequential circuit : latches and flip flops, Counters, Shift registers, Comparators, timers, multivibrators, Sample and hold circuits, ADCs and DACs. Semiconductor memories, logic implementation using programmable devices (ROM, PLA etc.)
5. Power Electronics
Semiconductor power devices: diode, transistor, SCR, triac, GTO, MOSFET & IGBT, triggering circuits. Phase Control rectifiers. bridge converters : fully Controlled and half Controlled, principles of choppers and inverters.
6. Signals and Systems
Representation and continuous time and discrete time signals and systems; Linear ime Invariant systems; Convolution, impulse response; time domain analysis of LTI systems based on convolution and differential equations, Fourier transform, Laplace transform, Z transform, transferfunction, sampling of signals, DFT, FFT, processing of analog signals through discrete time systems.

ELECTRICAL ENGINEERING PAPER - II
PART -I


1. Control System
Fundamental of control systems, block diagram algebra, Signal flow graph and Mason's gain formulae, Linear Time Invariant Systems; Time domain and frequency response. Proportional, PI and PID Control strategies. Stability analysis; Routh Hurwitz Criterion, Nyquist criterion, Design of lead-lag compensators. State Space models,Controllability and observability. Principles of discrete Control systems.
2. Microprocessors and Microcomputers
8 bit microprocessor 8085 : Architecture, CPU, module design, memory interfacing and I/O, interrupts, PPI 8255.

PART -II
Heavy Currents

1. Electromechanical energy Conversion
Principles of electromechanical energy conversion, Torque and emf in rotating machines, characteristics and performance analysis of DC machines and their starting and speed control. Transformers: Principles of operation and analysis, regulation, Three phase transformer, Three phase induction machines, and sychronous machines: Their characteristics and performance analysis, speed control. Special machines : Stepper motors, Brushless DC motors, switched reluctance motors, permanent magnet motors, Single phased induction motor (FHP motors) : Performance and analysis;
2. Industrial Drives & Utilisation
Basic Concepts of speed control of dc and ac motor drives. Applications of Variable speed drives V/f control, Quadrant operation of drives, Concept of Cycloconverts & Dual Converts fed AC & DC drive. Rating & characteristic of traction motors, dielectric & induction heating.
3. Power Systems Analysis and control
Performance evaluation of overhead transmission lines and cables, fundamentals of active and reactive power transfer, voltage control and power factor correction, per unit representation, Bus admittance and impedance matrices, Load flow study, Economic operation of power system, Symmetrical components, Analysis of symmetrical and unsymmetrical faults, concept of stability, swing curve and equal area criterion, static VAR systems, basic concepts of HVDC transmission,series and shunt compensation, FACTS. speed control of generators, tie line control and frequency control.
4. Switch gear and protection
Principle of over current, differential and distance protection, concept of solid state relays and circuit brakers various protection scheme for transmission lines, generator and transformer. Protection against surges.


PART - III
Light Current

1. Analog communication
Random variables - continuous, discrete, probability density functions, statistical averages, random signals, and noise, noise equivalent bandwidth, signal transmission with noise, signal to noise ratio, amplitude modulation, DSB, DSB-SC and SSB, modulators and demodulators, phase and frequency modulation, PM and FM signals, narrowband FM, generation and detection of FM and PM.
2. Digital communication
Pulse code modulation (PCM), differential pulse code modulation (DPCM), Delta modulation (DM), Digital modulation and demodulation schemes : Amplitude phase and frequency, keying schemes, (ASK, PSK, FSK), Error control coding, error detection and correction, linear block codes, convolution codes.
3. Satellite Communication, Radar and T
Satellite communication, general overview and technical characteristics earth station equipments, satellite link design, CNR of satellite systems, Radar : basic principles, pulsed systems : CW Doppler radar, FMCW radar, Phase array radar, television systems and standards, colour TV transmission and receiver systems.
4. Microwaves & Antenna
Electromagnetic radiation, Propagation of waves - ground waves, sky wave, space wave, tropospheric scatter propagation. Extraterrestrial communications. Antenna : Various types, gain, resistance, bandwidth, beam width and polarization, effect of ground. Antennacoupling; high frequency antennas; microwave antennas; special purpose antennas. Microwave Services : Klystron, magnetron, TWT, gun diodes, Impatt, Bipolar and FETs, Microwave integrated circuits. Microwave measurements.
5. Fiber Optic Systems
Multiplexing - Time division multiplexing, frequency division multiplexing, optical properties of materials, refractive index absorption and emission of light, optical fibers lasers and optoelectronic materials, fiber optic links.


Quick Reply
Your Username: Click here to log in

Message:
Options

Thread Tools Search this Thread



All times are GMT +5. The time now is 11:53 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
SEO by vBSEO 3.6.0 PL2

1 2 3 4