HAL management trainee Technical Question paper

Here I am looking for the HAL management trainee Technical Question paper so can you please provide me this?

[Kiran Chandar]

HAL MT Exam Conducted By Hindustan Aeronautics Limited

Management Trainee (Technical)
It has following subjects
Aeronautical
Computer Science
Electrical
Electronics
Mechanical
Metallurgy
Production

Duration: 2:30 Hrs

The test will be in three parts & comprising of Multiple Choice Questions (MCQs).

Part – I will consist of 20 MCQs on General Awareness.
Part – II will consist of 40 MCQs on English & Reasoning.
Part – III will consist of 100 MCQs on the concerned discipline of Engineering / Marketing / HR / Legal.

HAL management trainee Technical Question paper

1. Air Fuel ratio in a jet engine will be of the order of:
(a) 10:1 (b) 15:1
(c) 20:1 (d) 60:1
2. Fighter bombers use following type of engine:
(a) Turbo-jet (b) Turbo-propeller
(c) Rocket (d) Ram-jet
3. Least shrinkage allowance is provided in the case of following:
(a) Brass (b) Aluminum
(c) Cast Iron (d) Steel
4. If V is the volume of metal in a casting and A its surface area, the time of solidification will
be proportional to:
(a) V, 1/A (b) V,1/A2
(c ) V2 ,1/A (d) V2, 1/A2
5. Fire tube boilers are limited to a maximum design working pressure of :
(a) 1 kg/cm2 (b) 6 kg/cm2
(C) 17 kg/cm2 (d ) 100 kg/cm2
6. A dislocation represented by T is called:
(a) Positive edge dislocation
(b) Negative edge dislocation
(c) Positive screw dislocation
(d) Negative screw dislocation
7. The recrystallisation temperature of a cold worked material decreases with:
(a) Increase in the degree of deformation
(b) Increase in the initial grain size
(c) Increase in the temperature of cold working
(d) The presence of impurity
8. In a thyrister full converter feeding a continuous load current, what is the duration each
thyrister conducts in a cycle?
(a) 60 0 (b) 90 0
(c) 120 0 (d) 180 0
9. In a three-phase induction motor, the rotor field runs at the following speed with Respect to the
stator structure:
(a) At synchronous speed in the direction of stator field
(b) At a slip speed in the direction of stator speed
(c) At synchronous speed in a direction opposite to that of stator field
(d) At zero speed
10. In the hybrid parameter model of a transistor reverse transfer voltage ratio and forward
transfer
current ratio are respectively given by:
(a) h11 and h21 (b) h12 and h11
(c) h21 and h11 (d) None of these
11. A Signal x(t) has the Fourier transform
X( ) = { 1 for | | < }W . Its first zero-crossing in time domain occurs at:
O otherwise
(a) 1/pW (b) W
( c) p/ W (d) None of these
12. Magnetic tapes are suitable to applications:
(a) When only a few records are to be accessed
(b) When most of the records are to be accessed
(c) Only when all the records are to be processed
(d) None of the above
13. A system in which 2 or more cpu's are interconnected and share a common
Main memory is called:
(a) Pipeline machine
(b) Multifunctional system
(c) Multiprocess
(d) None of these
Which one of the following is the most stable configuration of an airplane in roll?
(A) Sweep back, anhedral and low wing
(B) Sweep forward, dihedral and low wing
(C) Sweep forward, anhedral and high wing
(D) Sweep back, dihedral and high wing
Which one of the following flight instruments is used on an aircraft to determine its attitude in
flight?
(A) Vertical speed indicator
(B) Altimeter
(C) Artificial Horizon
(D) Turn-bank indicator
A supersonic airplane is expected to fly at both subsonic and supersonic speeds during its whole
flight course. Which one of the following statements is TRUE?
(A) Airplane will experience less stability in pitch at supersonic speeds than at subsonic speeds
(B) Airplane will feel no change in pitch stability
(C) Airplane will experience more stability in pitch at supersonic speeds than at subsonic speeds
(D) Pitch stability cannot be inferred from the information given
Which one of the following is favorable for an airplane operation?
(A) Tail wind in cruise and head wind in landing
(B) Tail wind both in cruise and landing
(C) Head wind both in cruise and landing
(D) Head wind in cruise and tail wind in landing
Which one of the following is TRUE with respect to Phugoid mode of an aircraft?
(A) Frequency is directly proportional to flight speed
(B) Frequency is inversely proportional to flight speed
(C) Frequency is directly proportional to the square root of flight speed
(D) Frequency is inversely proportional to the square root of flight speed
Which one of the following statements is NOT TRUE for a supersonic flow?
(A) Over a gradual expansion, entropy remains constant
(B) Over a sharp expansion corner, entropy can increase
(C) Over a gradual compression, entropy can remain constant
(D) Over a sharp compression corner, entropy increases
The cross-section of a long thin-walled member is as shown in the figure. When subjected to pure
twist, point A
(A) does not move horizontally or axially, but moves vertically
(B) does not move axially, but moves both vertically and horizontally
(C) does not move horizontally, vertically or axially
(D) does not move vertically or axially, but moves horizontally
A

I am going to appear in HAL management trainee exam. So I need a sample paper. So here can you provide me a sample paper of this exam?

[sumit]

I have a sample paper of HAL management trainee Technical exam. So here I am providing you as you want.


HAL management trainee Technical Question paper


14) In aptitude part see through series completion there was a 5-6 no of that.

15) No aptitude questing like avg, %, proff-loss, prob, etc.

16) Sentence correction 2-3.

17) Why rotor of SCIM is skewed?

18) Magnetostriction increases-

19) Good transformer oil contains how much amount of water in ppm?

20) Lightning over voltage create how much volt?

21) K/s(s+1)(s+5) then find out the value of K so that system become stable.

22) There was a question from definition of Nyquist criteria.

23) Standing done up to the frequency range of? (audio)

24) If a square waveform if given to the supply side of a 2wdg transformer its o/p waveform will be-

25) SC test done on transformer because-

26) If a transformer is operating in .8 PF lag & at efficiency of .9, if now P is .8 lead the efficiency will become.

27) Interpoles are connected for?

28) Dielectric strength of air-

29) A alternator is connected to a grid. Now its prime mover is go slow by ½. Change in its exiting current to held in synchronism.

30) Is the strength of capacitor in LPF is increased the op voltage will-

31) The voltage of a generator and an infinite bus are given 0.92, 10 deg & 1.0, 0 deg resp. the generator acts as a "

32) A wave will not experience any reflection when impedance of line is equal to- surge imp

33) Power transmitted is related to system voltage as-

34) Delay creator ckt name (multivibrator name actually)

35) In tachogenerator adjustment is done by-

36) Surge wave is attended by- (C,L,R)

37) there was 10 question related to measurement-

38) Read all electrostatic instrument related question from any competitive exam book.

39) Lowest reading in moving iron meter is-

40) In galvanometer damping is provided by-

41) In electrodynamic meter a battery & a resistance is provide for-

42) Megger is used for-

43) A question like an ac is applied against a moving coil meter it will reads-

44) Rectifier type instrument measureswhat value - (Rms)

45) Advantage of electrostatic instrument is-

46) Creeping occurs because-

47) Why 2 holes are drilled oppositely in disc of energy meter.

48) Energy meter is a _____ type equipment (recording)

49) There was a question related to selection of a voltmeter based on accuracy-

50) Advantage of hay bridge over anderson bridge-

51) Inductance is measured by " (all the 3 bridge name) .

52) Potentiometer is which type of instrument-

53) Which type of motor is used in refrigerator?

54) Reflection coefficient based problem 1

55) Corona's advantage-