Syllabus of Electronics for CEPTAM of Defence Research and Development Organisation

I want to give the exam of CEPTAM of Defence Research and Development Organisation and for that I want to get the syllabus of Electronics for CEPTAM of Defence Research and Development Organisation so can you provide me that?

[Arun Vats]

As you want to get the syllabus of Electronics for CEPTAM of Defence Research and Development Organisation so here it is for you:

Networks:
Network graphs: matrices associated with graphs; incidence, fundamental cut set and fundamental circuit matrices. Solution methods: nodal and mesh analysis. Network theorems: superposition, Thevenin and Norton’s maximum power transfer, Wye-Delta transformation. Steady state sinusoidal analysis using phasors. Linear constant coefficient differential equations; time domain analysis of simple RLC circuits, Solution of network equations using Laplace transform: frequency domain analysis of RLC circuits. 2-port network parameters: driving point and transfer functions. State equations for networks.

Electronic Devices:
Energy bands in silicon, intrinsic and extrinsic silicon. Carrier transport in silicon: diffusion current, drift current, mobility, and resistivity. Generation and recombination of carriers. p-n junction diode, Zener diode, tunnel diode, BJT, JFET, MOS capacitor, MOSFET, LED, p-I-n and avalanche photo diode, Basics of LASERs. Device technology: integrated circuits fabrication process, oxidation, diffusion, ion implantation, photolithography, n-tub, p-tub and twin-tub CMOS process.

Analog Circuits:
Small Signal Equivalent circuits of diodes, BJTs, MOSFETs and analog CMOS. Simple diode circuits, clipping, clamping, rectifier. Biasing and bias stability of transistor and FET amplifiers. Amplifiers: single-and multi-stage, differential and operational, feedback, and power. Frequency response of amplifiers. Simple op-amp circuits. Filters. Sinusoidal oscillators; criterion for oscillation; single-transistor and op-amp configurations. Function generators and wave-shaping circuits, 555 Timers. Power supplies.

Digital Circuits:
Boolean algebra, minimization of Boolean functions; logic gates; digital IC families (DTL, TTL, ECL, MOS, CMOS). Combinatorial circuits: arithmetic circuits, code converters, multiplexers, decoders, PROMs and PLAs. Sequential circuits: latches and flip-flops, counters and shift-registers. Sample and hold circuits, ADCs, DACs. Semiconductor memories. Microprocessor(8085): architecture, programming, memory and I/O interfacing.

Signals and Systems: Definitions and properties of Laplace transform, continuous-time and discrete-time Fourier series, continuous-time and discrete-time Fourier Transform, DFT and FFT, z-transform. Sampling theorem. Linear Time-Invariant (LTI) Systems: definitions and properties; causality, stability, impulse response, convolution, poles and zeros, parallel and cascade structure, frequency response, group delay, phase delay. Signal transmission through LTI systems.

Control Systems:
Basic control system components; block diagrammatic description, reduction of block diagrams. Open loop and closed loop (feedback) systems and stability analysis of these systems. Signal flow graphs and their use in determining transfer functions of systems; transient and steady state analysis of LTI control systems and frequency response. Tools and techniques for LTI control system analysis: root loci, Routh-Hurwitz criterion, Bode and Nyquist plots. Control system compensators: elements of lead and lag compensation, elements of Proportional-Integral-Derivative (PID) control. State variable representation and solution of state equation of LTI control systems.

Communications:
Random signals and noise: probability, random variables, probability density function, autocorrelation, power spectral density. Analog communication systems: amplitude and angle modulation and demodulation systems, spectral analysis of these operations, superheterodyne receivers; elements of hardware, realizations of analog communication systems; signal-to-noise ratio (SNR) calculations for amplitude modulation (AM) and frequency modulation (FM) for low noise conditions. Fundamentals of information theory and channel capacity theorem. Digital communication systems: pulse code modulation (PCM), differential pulse code modulation (DPCM), digital modulation schemes: amplitude, phase and frequency shift keying schemes (ASK, PSK, FSK), matched filter receivers, bandwidth consideration and probability of error calculations for these schemes. Basics of TDMA, FDMA and CDMA and GSM.

Electromagnetics:
Elements of vector calculus: divergence and curl; Gauss’ and Stokes’ theorems, Maxwell’s equations: differential and integral forms. Wave equation, Poynting vector. Plane waves: propagation through various media; reflection and refraction; phase and group velocity; skin depth. Transmission lines: characteristic impedance; impedance transformation; Smith chart; impedance matching; S parameters, pulse excitation. Waveguides: modes in rectangular waveguides; boundary conditions; cut-off frequencies; dispersion relations. Basics of propagation in dielectric waveguide and optical fibers. Basics of Antennas: Dipole antennas; radiation pattern; antenna gain.

Contact Details:
Defence Research and Development Organisation
Civil Lines,
New Delhi,
Delhi (state) ‎
India

Map Location:
[MAP]https://www.google.co.in/maps?q=Defence+Research+and+Development+Organisati on++&hl=en&ll=28.684941,77.227986&spn=0.009506,0.0 13046&sll=11.393164,79.713278&sspn=0.010623,0.0130 46&t=m&z=16&iwloc=A[/MAP]

Hi I want the syllabus of Electrical Engineering of DRDO CEPTAM (Centre for Personnel Talent Management) so will you please provide me?

[Arun Vats]

Ok, here I am providing you the syllabus of Electrical Engineering of DRDO CEPTAM (Centre for Personnel Talent Management).

DRDO CEPTAM (Centre for Personnel Talent Management) Syllabus

The written examination consisting of 150 objectives type multiple choice questions.

For STA ‘B’ & Technician ‘A’ :

The written test will consist of
(i) 50 questions on General Awareness, General Intelligence, Reasoning Ability, General Science
(ii) 100 Questions on Subject concerned.

For Assistant Hindi:

The written test will consist of
(i) 50 Questions on General Awareness, General Intelligence, Reasoning & Numerical Ability
(ii) 50 Questions each on Hindi and English Language.

For Admin Assistant ‘A’ & Store Assistant ‘A’ :

The written examination will consist of
(i) 50 questions on General Awareness, General Intelligence & Reasoning & Numerical Ability
(ii) 50 questions on General English
(iii) 50 Questions on Hindi OR English language.

For Civilian Driver ‘A’, Security Assistant ‘A’, Fire Engine Driver and Fireman:

The written test will consist of
(i) 100 Questions on General Awareness, General Reasoning, Arithmetic , Numerical Ability
(ii) 25 Job related questions and
(ii) 25 Questions on Hindi or English language.

DRDO CEPTAM Electrical Engineering syllabus-

The most important topics which may cover the Syllabus are-

Electric Circuits and Fields
Signals and Systems
Electrical Machines
Power System
Control System
Electrical and Electronic MEasurements
Anolog and Digital Electronics
Power Electgronics and Drives
Electro Magnetic Induction