2023 2024 Student Forum > Management Forum > Main Forum

 
  #2  
28th June 2018, 01:39 PM
Unregistered
Guest
 
Re: SSC Junior Engineer Exam Question Paper

I want the sample question paper of Staff Service Commission SSC Junior Engineer Exam so will you provide me?
  #3  
28th June 2018, 01:39 PM
Super Moderator
 
Join Date: Aug 2012
Re: SSC Junior Engineer Exam Question Paper

I am providing you the sample question paper of Staff Service Commission SSC Junior Engineer Exam

SSC Junior Engineer JE Exam Question Paper

Civil Engineering


QID : 701 - Which of the following defect appears due to presences of alkalies in the bricks?

Options:
1) Bloating
2) Black core
3) Cracks
4) Efflorescence
Correct Answer: Efflorescence


QID : 702 - For which of the following process Boucherie process is used?

Options:
1) Manufacturing of bricks
2) Manufacturing of cement
3) Production of clay tiles
4) Treatment of green timber
Correct Answer: Treatment of green timber


QID : 703 - What is the percentage content of asphalt in the cut-back asphalt?

Options:
1) 10%
2) 30%
3) 50%
4) 80%
Correct Answer: 80%


QID : 704 - In which of the following test of bitumen Ring and Ball apparatus is used?

Options:
1) Penetration test
2) Softening point test
3) Viscosity test
4) Flash and fire point test
Correct Answer: Softening point test


QID : 705 - The defect in timber that causes longitudinal separation of woods between the annular rings is known as_______.

Options:
1) knots
2) rind gall
3) shakes
4) twisted fibers
Correct Answer: shakes


QID : 706 - Which of the seasoning method is adopted for the rapid seasoning of timber on large scale to obtain any desired moisture content?

Options:
1) Air seasoning
2) Boiling process
3) Kiln seasoning
4) Water seasoning
Correct Answer: Kiln seasoning


QID : 707 - What is the gel-space ratio of a sample of concrete, if the concrete is made with the 600 g of cement with the water-cement ratio of 0.65?

Options:
1) 0.012

2) 0.432

3) 0.678

4) 0.874
Correct Answer: 0.678


QID : 708 - The concrete sample is cured at 15 degree Celsius for 28 days. If the origin temperature is taken as -11 degree Celsius, what is the maturity (degree Celsius days) of concrete sample?

Options:
1) 112

2) 308

3) 402

4) 728
Correct Answer: 728


QID : 709 - The ingredient of paint which are used to hide the surface irregularities and imparts color is known as_______.

Options:
1) adultrants
2) drier
3) pigments
4) solvents
Correct Answer: pigments


QID : 710 - If the least lateral dimension of aggregate is less than 0.6 times of its mean dimension, the aggregate is classified as_____.

Options:
1) angular
2) flaky
3) irregular
4) rounded
Correct Answer: flaky


QID : 711 - Explosive required for blasting is measured in _____.

Options:
1) cubic meter
2) explosive power
3) energy released
4) kilograms
Correct Answer: kilograms


QID : 712 - Which of the following is the correct statement for length of the long wall as one move from earthwork to brick work in super structure in long and short wall method?

Options:
1) Its value decreases
2) Its value depends upon the length of the wall.
3) Its value increases.
4) Its value remains same.
Correct Answer: Its value decreases


QID : 713 - Calculate an approximate estimate (Rs.) of the building with total plinth area of the building is 500 square meters. The rate of the plinth area is Rs. 3,000 per square meters. The costs of the water supply and contingencies are 7% and 5% of cost of construction respectively.

Options:
1) 1500000

2) 1650000

3) 1680000

4) 1870000
Correct Answer: 1680000


QID : 714 - Calculate the cost of the plastering required for a wall of 4 m long, 3.5 m high and 300 mm thick, if the rate of plastering is Rs. 12 per square meter.

Options:
1) 101
2) 168
3) 336
4) 423
Correct Answer: 336

QID : 715 - Which of the following is the unit of measurement for the sills of windows?

Options:
1) Cubic meter
2) Meter
3) Number
4) Square meter
Correct Answer: Number


QID : 716 - Which of the following area is included in the plinth area of the building?

Options:
1) Area of the lofts.
2) Area of barsati at terrace level.
3) Cornices
4) Tower projecting above terrace level.
Correct Answer: Area of barsati at terrace level.


QID : 717 - Which of the following method is used for estimation of depreciation of building?

Options:
1) Constant percentage method
2) Direct comparison method
3) Logistic curve method
4) Rental method
Correct Answer: Constant percentage method


QID : 718 - Capitalized value of a property is the product of _____.

Options:
1) annual income and annuity
2) annual income and interest
3) annual income and sinking fund
4) annual income and years purchase
Correct Answer: annual income and years purchase


QID : 719 - Calculate the total quantity (cubic meter) of the coarse aggregate required for an isolated rectangular footing of size 3 m x 2 m, if 1 : 2 : 4 cement concrete is used. The depth of the footing is 600 mm.

Options:
1) 2.05

2) 2.46

3) 3.16

4) 3.82
Correct Answer: 3.16


QID : 720 - What is the actual size (mm) of the standard modular brick as per Indian Standards?

Options:
1) 190 x 90 x 90

2) 200 x 90 x 90

3) 200 x 100 x 100

4) 229 x 114 x 76
Correct Answer: 190 x 90 x 90


QID : 721 - Which of the following statement is not correct for the principle of surveying?

Options:
1) Location of a point with respect to two references
2) Major control points are measured with lower degree of precision.
3) Minor control points are measured with higher degree of precision
4) Working from part to whole
Correct Answer: Working from part to whole


QID : 722 - Which one of the following set of internal angles (degree) of a triangle does not show well condition triangle?

Options:
1) 20, 90, 70
2) 25, 45,110
3) 40, 125, 15
4) 35, 80, 65
Correct Answer: 35, 80, 65


Quick Reply
Your Username: Click here to log in

Message:
Options

Thread Tools Search this Thread



All times are GMT +5. The time now is 10:58 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
SEO by vBSEO 3.6.0 PL2

1 2 3 4