Procedure to get Job in BSNL

Will you please provide the information regarding the Procedure to get Job in BSNL?

[Kiran Chandar]

BSNL invites the application for the recruitment of various posts from time to time where applicants can apply.

Here I am providing the information regarding recent BSNL notification for your idea .

Bharat Sanchar Nigam Limited (BSNL) Lucknow has notified for the filling up of backlog vacancies of Junior Telecom Officers (Electrical) under the special recruitment drive for persons with disabilities.

Offered Post: Junior Telecom Officer (Electrical)

Available Seats: 01

Place of Job: Lucknow, Uttar Pradesh

Scale of Income: Rs 16, 400- 40, 500 (IDA) + Annual Increment @ 3%

Eligibility:

Candidates must have completed their degrees as on 31st December 2013 in either of the following: BE (Bachleor of Engineering)/ B.Tech (Bachelor of Technology) in Electrical Engineering from any recognized colleges of engineering or university for this purpose.

The maximum ages of the Candidates should be as follows for all the applicants on the date of closing applications i.e. 5th September 2014.

SC/ ST Candidates: 45 years

OC Candidates: 40 years

OBC Candidates: 43 years

Process of Selection:
Candidates should appear and qualify in an Open Competitive Examination
The exam will be a three hours question paper having following major sections to be answered:
Section 1: Electrical Engineering (50 Questions);
Section 2: Electrical Engineering (50 Questions) and
Section 3: General Awareness (20 Questions) respectively.

Important Dates:
Date of Closing Applications: 5th September 2014
Date of Examination : 23rd November 2014

How can I get job in BSNL? Is there any one please provide me procedure to get job in BSNL? And in BSNL which jobs are available for engineering student provide me eligibility criteria?

[Quick Sam]

For the job in BSNL after you engineering you need to get JTO exam. JTO stands for junior telecom officer and in BSNL also invite for the engineering post.

BSNL recruit every year for the candidates in the department of Junior Telecom Officer (JTO), TTA, and Engineers. In India every students have ambition to get job in BSNL.


Education: when you have this educational qualification than you can able to apply for this BSNL job:
You should have completed your Engineering/Bachelor of Technology or equivalent Engineering degree from a recognized university in Telecommunication, Electronics , Radio, Computer, Electrical, Information Technology, Instrumentation from a recognized university.

Age: your age should be in below 30 years

Selection process: Selection will be based on the performance in written test and interview

Procedure for get job in BSNL:

You need to keep touch with BSNL official site and when this firm recruit for the Engineering post then you should apply for it.
And you can also send your resume to BSNL HR through E-mail.


Exam will be based on following subject:
Part -1 General Ability
Part-2 Basic Enigneering-90
Part-3 Specialisation-90

Sir I want to know that what is the procedure to get Job of JTO in BSNL so can you please tell me the same

[Kiran Chandar]

Bharat Sanchar Nigam Limited is an Indian state-owned telecommunications company headquartered in New Delhi, India.

BSNL JTO (T) Recruitment


The selection for the JTO post is through the written test followed by the interview


Eligibility

Age limit:

18-30 years

Qualification:

Should have engineering Degree in

Telecommunication

Electronics/

Electrical/

Radio/

Computer/

Instrumentation/

IT

The degree should be from recognized University/Institution or B.Sc. (Electronics)


Important dates

The application process start in the month of the December


Syllabus for BSNL JTO Exam:-

SECTION-I

1.Materials and Components - Structure and properties of Electronic Engineering materials, Conductors, Semiconductors and Insulators, Magnetic, Ferroelectric, Piezoelectric, Ceramic, Optical and Superconducting materials. Passive components and characteristics, Resistors, Capacitors and Inductors; ferrites, Quartz crystal, Ceramic resonators, Electromagnetic and Electromechanical components.

2.Physical Electronics, Electron Devices and ICs - Electrons and holes in Semiconductors, Carrier Statistics, Mechanics of current flow in a semi-conductor, Hall effect; Junction theory; Different types of diodes and their characteristics; Bipolar Junction transistor, Field effect transistors, Power switching devices like SCRs, CTOs, power MOSFETs; Basics of ICs-bipolar, MOS and CMOS types; basics of Opto Electronics.

3.Network theory = Network analysis techniques: Network theorem, trans cient and steady state sinusoidal response, Transmission criteria: delay and rise time Elmore’s and other definition, effect of cascading. Elements of network synthesis.

4.Electromagnetic Theory - Transmission lines: basic theory, standing waves, m atching applications, microstrip lines; Elements of antenna theory.

5.Elecronic Measurements and instrumentation Basic concepts, standards and error analysis; Measurements of basic electrical quantities and parameters; Electronic measuring instruments an d their principles of working: analog and digital, comparison, Characteristics, applications. Transducers; Electronic measurements of non – electrical quantities like temperature, Pressure, h umidity etc. Basics of telemetry for industrial use

6.Power Electronics - Power semiconductor devices, Thyristor, Power transistor, MOSFETS, Characteristics and operation. AC to DC convertors; 1 – Phase and 3 – p hase DC to DC Convertors AC regulators. Thyristor controlled reactors, switched capacitor n etworks. Inverters: Single – phase and 3 – Phase. Pulse width modulation. Sinusoidal modulation with uniform sampling. Switched mode power supplies.

SECTION - II

1.Analog Electronic Circuits - Transistor biasing and stabilization, Small Signal analysis. Power amplifiers. Frequency response, Wide band techniques, Feedback amplifiers. Oscillators. Rectifiers and power supplies. Operational Amplifier, other linear integrated circuits and applications. Pulse shaping circuits and waveform generators.

2.Digital Electronic Circuits - Transistor as a switching element; Boolean algebra, simplification of Boolean functions, Karnaugh Map and applications, IC Logic gates and their characteristics; IC logic families; DTL, TTL, ECL, NMOS, PMOS and CMOS gates and their comparison; Combinational logic circuits; half adder, full adder; Digital Compartor; Multiplexer Demutliplexer, ROM and their applications. Flip-flops, R-S, J-K, D and T flip-flops; Different types of counters and registers; waveform generators, A/D and D/A convertors, Semiconductor memories.

3.Control systems - Transient and steady state response of control sys tems; Effect of feedback on stability and sensitivity, Root locus techniques; Frequency response analysis, Concepts of gain and phase margins; Constant-M and Constant-N Nichol’s Chart, Approximation of transient response from Constant-N Nichol’s Chart; Approximation of transient response from closed loop frequency response, design of Control systems, Compensators; Industrial controllers.

4.Communication systems - Basic information theory; Modulation and detection in analogue and digital systems; Sampling and data reconstruction, Quantization & Co ding; Time division and frequency division multiplexing; Equalisation, Optical communication; in free space & fibre optic; propagation of signals at HF, VHF, UHF and microwave frequency; Satellite communication.

5.Microwave Engineering - Microwave Tubes and solid state devices, Microwave generation and amplifiers, Waveguides and other Microwave Components and Circu its, Microstrip circuits, microwave antennas, Microwave Measurements, MASERS LASERS; Mi crowave propogation, Microwave Communication Systems-terrestrial and satellite based.

6.Computer Engineering - Number Systems; Data representation, Programming; Elements of a high level programming language PASCAL/C; use of basic data st ructures; Fundamentals of computer architecture processor design; Control unit design; Memory organization ; Personal computers and their typical uses.

7.Microprocessors - Microprocessor architecture – Instruction set and simple assembly language programming. Interfacing for memory and I/O. applications of Mic roprocessors in Telecommunications and power system.

SECTION III

General Ability Test -

Applicants comprehension and understanding of General English shall be tested through simple exercises.
Questions on knowledge of current events and of such matter of everyday observation and experience in their scientific aspe cts as may be expected of an educated person.
Questions will also be included on events and devel opments in Telecommunications, History of India and Geography.