Previous Year Question Paper SSC Junior Engineer(Civil) Pdf

Hello Sir I am going to write Staff Selection Commission (SSC) Junior Engineer (Civil) Exam . I am fully prepared for this Exam but I have no idea about its paper pattern . Would you please provide me a Pdf that contains Previous Year Question Paper of SSC Junior Engineer (Civil) ??

Hi buddy here I am looking for SSC Junior Engineer Civil Previous Question Papers to do preparation of this exam so will you plz let me know from where I can do download it ??

[pooja]

As you want here I am giving below SSC Junior Engineer Civil Previous Question Papers on your demand :

QID : - Which of the following defect appears due to presences of alkalies in the bricks?

Options:
1) Bloating
2) Black core
3) Cracks
4) Efflorescence
Correct Answer: Efflorescence


QID : - For which of the following process Boucherie process is used?

Options:
1) Manufacturing of bricks
2) Manufacturing of cement
3) Production of clay tiles
4) Treatment of green timber
Correct Answer: Treatment of green timber


QID : - What is the percentage content of asphalt in the cut-back asphalt?

Options:
1) 10%
2) 30%
3) 50%
4) 80%
Correct Answer: 80%


QID : - In which of the following test of bitumen Ring and Ball apparatus is used?

Options:
1) Penetration test
2) Softening point test
3) Viscosity test
4) Flash and fire point test
Correct Answer: Softening point test


QID : - The defect in timber that causes longitudinal separation of woods between the annular rings is known as_______.

Options:
1) knots
2) rind gall
3) shakes
4) twisted fibers
Correct Answer: shakes


QID : - Which of the seasoning method is adopted for the rapid seasoning of timber on large scale to obtain any desired moisture content?

Options:
1) Air seasoning
2) Boiling process
3) Kiln seasoning
4) Water seasoning
Correct Answer: Kiln seasoning


QID : - What is the gel-space ratio of a sample of concrete, if the concrete is made with the 600 g of cement with the water-cement ratio of 0.65?

Options:
1) 0.012

2) 0.432

3) 0.678

4) 0.874
Correct Answer: 0.678


QID : - The concrete sample is cured at 15 degree Celsius for 28 days. If the origin temperature is taken as -11 degree Celsius, what is the maturity (degree Celsius days) of concrete sample?

Options:
1) 112

2) 308

3) 402

4) 728
Correct Answer: 728


QID : - The ingredient of paint which are used to hide the surface irregularities and imparts color is known as_______.

Options:
1) adultrants
2) drier
3) pigments
4) solvents
Correct Answer: pigments


QID : - If the least lateral dimension of aggregate is less than 0.6 times of its mean dimension, the aggregate is classified as_____.

Options:
1) angular
2) flaky
3) irregular
4) rounded
Correct Answer: flaky


QID : - Explosive required for blasting is measured in _____.

Options:
1) cubic meter
2) explosive power
3) energy released
4) kilograms
Correct Answer: kilograms


QID : - Which of the following is the correct statement for length of the long wall as one move from earthwork to brick work in super structure in long and short wall method?

Options:
1) Its value decreases
2) Its value depends upon the length of the wall.
3) Its value increases.
4) Its value remains same.
Correct Answer: Its value decreases


QID : - Calculate an approximate estimate (Rs.) of the building with total plinth area of the building is 500 square meters. The rate of the plinth area is Rs. 3,000 per square meters. The costs of the water supply and contingencies are 7% and 5% of cost of construction respectively.

Options:
1) 1500000

2) 1650000

3) 1680000

4) 1870000
Correct Answer: 1680000


QID : - Calculate the cost of the plastering required for a wall of 4 m long, 3.5 m high and 300 mm thick, if the rate of plastering is Rs. 12 per square meter.

Options:
1) 101
2) 168
3) 336
4) 423
Correct Answer: 336

SSC Junior Engineer Civil Previous Question Papers