#1
25th August 2014, 04:10 PM
| |||
| |||
ONGC Trainee Exam Previous Papers
I am looking for question paper for Oil and Natural Gas Corporation (ONGC) graduate trainee examination ?
|
#2
26th August 2014, 09:29 AM
| |||
| |||
Re: ONGC Trainee Exam Previous Papers
Here I am giving you question paper for Oil and Natural Gas Corporation (ONGC) graduate trainee examination below : ONGC GT Civil Engineering 1. Which one of the following tests is performed in the laboratory to determine the extent of weathering of aggregates for road works? (a) Soundness test (b) Crushing test (c) Impact test (d) Abrasion test Ans. (a) 2. Which one of the following geometric features requires the magnitudes of weaving angle and weaving distance for its design? (a) Rotary design (b) Right-angle intersection (c) Roundabout (d) Grade-separated junction Ans. (a) 3. Which one of the following methods is used in the design of rigid pavements? (a) CBR method (b) Group index method (c) Westergaard’s method (d) McLeod’s method Ans. (c) 4. In which one of the following yards, are reception, sorting and dispatch of railway wagons done? (a) Loco yard (b) Marashalling yard (c) Goods yard (d) Passenger yard Ans. (b) 5. Which one of the following is not a desirable property of the subgrade soil as a highway meterial? (a) Stability (b) Ease of compaction (c) Good drainage (d) Bitumen adhesion Ans. (d) 6. Consider the following statements: In surverying operations, the word ‘reciprocal’ can be associated with 1. ranging 2. levelling 3. contouring Which of the above statements is/are correct? (a) 1 only (b) 1 and 2 only (c) 2 and 3 only (d) 1, 2 and 3 Ans. (b) 7. How many- sidereal days are there in a solar year? (a) 365.2840 (b) 366.2422 (c) 360.2500 (d) 365.0000 Ans. (b) 8. Consider the following statements A sidereal year can be defined as the time interval: 1. between two successive transits .of the sun through the meridian of any of the fixed stars 2. between two successive passages of the sun through perigee Which of the above statements is/are correct? (a) 3 only (b) 1and 2 (c) 2 and 3 (d) 1 only Ans. (b) 9. Which one of the following methods of computing area assumes that the short, lengths of the boundary between the ordinates are parabolic ares? (a) Average ordinate rule (b) Middle ordinate rule (c) Simpson’s rule (d) Trapezoidal rule Ans. (c) 10. Which one the following errors is more severe in plane-table surveying? (a) Defective sighting (b) Defective orientation (c) Movement of board between sights (d) Non-horizontality of board when points sighted are at large differences of their elevation . Ans. (b) 11. Which one of the following sets of factors is related to design of thickness rigid pavement by Westergaard method? (a) CBR value and stiffness index of soil (b) Deflection factor and traffic index (c) Swelling index and bulk modulus (d) Radius of relative stiffness and modulus of subgrade reaction Ans. (d) 12. Consider the following in relation to group index of soil: 1. Liquid limit 2. Sandy loam 3. Plasticity index 4. Per cent passing 75 microns sieve Which of the above is/are used for estimating the group index? (a) 1 only (b) 1and 2 (c) 2 and 3 (d) 1, 3 and 4 Ans. (d) 13. Which set of traffic functional design as well as for ‘highway capacity’ design? (a) Origin and destination studies (b) Parking and accident studies (c) Speed and volume studies (d) Axle load studies Ans. (a) 14. Which one of the following traffic survey schemes is most relevant when deciding on locating major ‘routes’ in a city? (a) Traffic volume survey (b) Origin and destination survey (c) Speed survey (d) Traffic capacity survey Ans. (b) 15. Which one of the following equipments is useful in determining spot speed in traffic engineering? (a) Endoscope (b) Periscope (c) Radar (d) Tachometer Ans. (c) 16. Hot bitumen is sprayed over freshly constructed bituminous surface followed by spreading of 6.3 mm coarse aggregates and rolled. Which one of the following is indicated by this type of construction? (a) Surface dressing (b) Gravel-bitumen mix (c) Liquid seal coat (d) Seal coat Ans. (a) 17. Radius of relative stiffness of cement concrete pavement does not depend upon which one of the following? (a) Modulus of subgrade reaction (b) Wheel load (c) Modulus of elasticity of cement concrete (d) Poisson’s ratio of concrete Ans. (b) 18. For conditions obtaining in India, at which location in a cement concrete payement will the combined stresses due to traffic wheel studies is needed for well as for ‘highway load and temperature have to be critically checked during design? (a) Corner (b) Corner and interior (c) Corner and edge (d) Corner, edge and interior Ans. (d) 19. Consider the following factors: 1. The change in the shape and size of the channel cross-section 2. The change in the slope of the channel 3. The presence of obstruction 4. The change in the frictional forces at the boundaries Which of the above factors would cause a gradually varied flow? (a) 1, 2, 3 and 4 (b) 1, 2 and 3 only (c) 2 and 4 only (d) 3 and 4 only Ans. (a) 20. Under which one of the following categories is the river Ganga classified in the reach through UP and Bihar? (a) Straight river (b) Meandering river (c) Braided river (d) Deltaic river Ans. (b) 21. Which of the following categories best describes the Hirakud reservoir? (a) Reservoir for irrigation and power (b) Reservoir for flood control, power and irrigation (c) Reservoir for irrigation and water supply (d) Reservoir for recreation and fishery Ans. (b) |
|