2023 2024 Student Forum > Management Forum > Main Forum

 
  #2  
6th November 2014, 02:03 PM
Super Moderator
 
Join Date: Apr 2013
Re: NPCIL Mechanical Engineering Syllabus

Here I am providing the Mechanical Engineering Syllabus/pattern of NPCIL exam which you are looking for .

The duration of the Written Test will be of 2 hours and will be of 100 marks.

The Written Test will consists of two parts

(I) Management & General Aptitude Test (English Language, Quantitative Aptitude, Logical Reasoning, Data Interpretation, Analytical Ability) for 50 marks
and

Functional Knowledge Test (comprise of questions related to relevant professional qualification) for 50 Marks.

The questions will be of Objective type. Each objective question is followed by answers serially numbered as A, B, C, and D.

NCPIL Mechanical Question Paper

During the execution of a CNC part program block NO20 GO2 X45.0 Y25.0 R5.0 the type of tool motion will be
A) circular Interpolation — clockwise
B) circular Interpolation — counterclockwise
C) linear Interpolation
D) rapid feed
Answer : (A)

In an interchangeable assembly, shafts of size 25.000+0.040mm mate with holes of size 25.000+0.020 mm. The maximum possible clearance in the assembly will be
A) 10 microns
B) 20 microns
C) 30 microns
D) 60 microns
Answer : (D)

Stokes theorem connects
A) a line integral and a surface integral
B) a surface integral and a volume integral
C) a line integral and a volume integral
D) gradient of a function and its surface integral
Answer : (A)

When the temperature of a solid metal increases,
A) strength of the metal decreaes but ductility increases
B) both strength and ductility of the metal decrease
C) both strength and ductility of the metal increase
D) strength of the metal increases but ductility decreases
Answer : (A)

In a machining operation, doubling the cutting speed reduces the tool life to 1/8 of the original value. The exponent n in Taylor
A) 1/8
B) 1/4
C) 1/3
D) 1/2
Answer : (C)

In PERT analysis a critical activity has
A) maximum Float
B) zero Float
C) maximum Cost
D) minimum Cost
Answer : (B)

Environment friendly refrigerant R134a is used in the new generation domestic refrigerators. Its chemical formula is
A) CH C1 F2
B) C2 C13 F3
C) C2 C12 F4
D) C2 H2 F4
Answer : (D)

Which of the following statements is INCORRECT?
(A) Grashof’s rule states that for a planar crank-rocker four bar mechanism, the
sum of the shortest and longest link lengths cannot be less than the sum of
the remaining two link lengths.
(B) Inversions of a mechanism are created by fixing different links one at a time.
(C) Geneva mechanism is an intermittent motion device
(D) Gruebler’s criterion assumes mobility of a planar mechanism to be one.

For the stability of a floating body, under the influence of gravity alone, which of
the following is TRUE?
(A) Metacentre should be below centre of gravity
(B) Metacentre should be above centre of gravity
(C) Metacentre and centre of gravity must lie on the same horizontal line
(D) Metacentre and centre of gravity must lie on the same vertical line

The material property which depends only on the basic crystal structure is
(A) fatigue strength (B) work hardening
(C) fracture strength (D) elastic constant

Little’s law is relationship between
(A) stock level and lead time in an inventory system
(B) waiting time and length of the queue in a queuing system
(C) number of machines and job due dates in a scheduling problem
(D) uncertainty in the activity time and project completion time

Vehicle manufacturing assembly line is an example of
(A) product layout (B) process layout (C) manual layout (D) fixed layout

Simplex method of solving linear programming problem uses
(A) all the points in the feasible region
(B) only the corner points of the feasible region
(C) intermediate points within the infeasible region
(D) only the interior points in the feasible region.
  #3  
4th October 2019, 11:49 AM
Unregistered
Guest
 
Re: NPCIL Mechanical Engineering Syllabus

here I am looking for NPCIL Mechanical Engineering paper Syllabus for its Stipendiary Trainee (Operator/ Maintainer) Exam recruitment exam preparation , so will you plz provide me same here ???
  #4  
4th October 2019, 11:51 AM
Super Moderator
 
Join Date: Aug 2012
Re: NPCIL Mechanical Engineering Syllabus

As you want here I am giving bellow NPCIL Mechanical Engineering paper Syllabus for its Stipendiary Trainee (Operator/ Maintainer) Exam recruitment exam preparation :

NPCIL Mechanical Engineering paper Syllabus

Heat-Transfer
Refrigeration & Air Conditioning
Hydraulic Machines
Theory of Machines
Industrial Engineering
Fluid Mechanics
Machine Design
The strength of Materials
Mechanics of Materials
IC Engines
Engineering Mechanics
Production Engineering
Vibrations
Thermodynamics
Production Management etc.

NPCIL Mechanical Engineering paper
Question 1
Given that +3=0, and (0)= 1, (0)=0, what is (1)?
A
099
B
0.16
C
0.16
D
0.99
Question 2
A coin is tossed 4 times .What is the probability of getting heads exactly 3 times?
A
1/4
B
3/8
C
1/3
D
3/4
Question 3
The transverse shear stress acting in a beam of rectangular cross-section, subjected to a transverse shear load is
A
Variable with maximum at the bottom of the beam
B
Variable with maximum at the top of the beam
C
Uniform
D
Variable with maximum of the neutral axis
Question 4
A rod of Length L and diameter D is subjected to a tensile load P. Which of the following is sufficient to calculate the resulting chance in diameter?
A
Youngs modulus
B
Shear modulus
C
Poissons ratio
D
Both Youngs modulus and shear modulus
Question 5
A planar mechanism has 8 link and 10 rotary joints. The number of degrees of freedom of the mechanism, using Grueblers criterion, is
A
0
B
1
C
2
D
3
Question 6
An axial residual compressive stress due to a manufacturing process is present on the outer surface of a rotating shaft subjected to bending. Under a given bending load, the fatigue life of the shaft in the presence of the residual compressive stress is
A
Decreased
B
Increased or decreased, depending on the external bending load
C
Neither decreased nor increased
D
Increased
Question 7
2 moles of oxygen are mixed adiabatically with another mole of oxygen in mixing chamber, so that the final total pressure and temperature of the mixture become same as those of the individual constituents at their initial states. The universal gas constant is given as R. The change in entropy due to mixing, per mole of oxygen is given by
A
Rln2
B
0
C
R ln2
D
R ln4
Question 8
Which one of the following is NOT a necessary assumption for the air-standard Otto cycle?
A
All processes are both internally as well as externally reversible
B
Intake and exhaust processes are constant volume heat rejection processes
C
The combustion process is a constant volume heat addition process
D
The working fluid is an ideal gas with constant specific heats
Question 9
Internal gear cutting operation can be performed by
A
milling
B
shaping with rack cutler
C
shaping with pinion cutter
D
bobbing
Question 10
For whet value of a, if any, will the following system of equations in x, y and z have a solution?2x + 3y =4x+y+ x=4x+2y-z=a
A
Any real Number
B
0
C
1
D
there is no such value
Question 11
A solid circular shaft of diameter 100 mm is subjected to an axial stress of 50MPa. It is further subjected to a torque of 10 kNm. The maximum principal stress experienced on the shaft is closest to
A
41 MPa
B
8 MPa
C
164 MPa
D
204 MPa
Question 12
A compression spring is made of music wire of 2 mm diameter having a shear strength and snear modulus of 800 MPa and 80 GPa respectively The mean coil diameter is 20 mm. free length is 4O mm and the number of active coils is 10. If the mean coil diameter is reduced to 10mm. the stiffness of the spring is approximately
A
decreased by 8 times
B
decreased by 2 times
C
increased by 2 times
D
increased by 8 times
Question 13
A clutch has outer and inner diameters 100 ram and 40 mm respectively. Assuming a uniform pressure of 2 MPa and coefficient of friction of liner material 0.4. the torque carrying capacity of the clutch is
A
148 Nm
B
196 Nm
C
372 Nm
D
490 Nm
Question 14
A spur gear has a module of 3 mm. number of teeth 16, a face width of 36 mm and a pressure angle of 2. It is transmitting a power of 3 kW at 20 rev/s. taking a velocity factor of 1.5, and a form factor of 0.3, the stress in the gear tooth is about
A
32 MPa
B
46 MPa
C
58 MPa
D
70 MPa
Question 15
A two dimensional fluid element rotates like a rigid body. At a point within the element, the pressure is 1 unit. Radius of the Mohrs circle, characterizing the state of stress at that point, is
A
0.5 unit
B
0 unit
C
1 unit
D
2 unit


Tags
mechanical engineering

Quick Reply
Your Username: Click here to log in

Message:
Options

Thread Tools Search this Thread



All times are GMT +5. The time now is 08:03 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
SEO by vBSEO 3.6.0 PL2

1 2 3 4