NCERT XI Syllabus Changed??

Will you please tell me whether 11th class NCERT syllabus of Physics changed or not???

[Arun Vats]

No there is no change in the 11th class NCERT syllabus of Physics, here I am sharing the XI Physics Syllabus of NCERT

Unit I: Physical World and Measurement (Periods 10)
Physics: Scope and excitement; nature of physical laws; Physics, technology and society. Need for measurement: Units of measurement; systems of units; SI units, fundamental and derived units. Length, mass and time measurements; accuracy and precision of measuring instruments; errors in measurement; significant figures. Dimensions of physical quantities, dimensional analysis and its applications.

Unit II: Kinematics (Periods 30)
Frame of reference, Motion in a straight line: Position-time graph, speed and velocity. Uniform and non-uniform motion, average speed and instantaneous velocity. Uniformly accelerated motion, velocity time and position-time graphs, relations for uniformly accelerated motion (graphical treatment). Elementary concepts of differentiation and integration for describing motion. Scalar and vector quantities: Position and displacement vectors, general vectors and notation, equality of vectors, multiplication of vectors by a real number; addition and subtraction of vectors. Relative velocity. Unit vectors. Resolution of a vector in a plane – rectangular components. Scalar and Vector products of Vectors. Motion in a plane. Cases of uniform velocity and uniform acceleration – projectile motion. Uniform circular motion.

Unit III: Laws of Motion (Periods 16)
Intuitive concept of force. Inertia, Newton’s first law of motion; momentum and Newton’s second law of motion; impulse; Newton’s third law of motion. Law of conservation of linear momentum and its applications. Equilibrium of concurrent forces. Static and kinetic friction, laws of friction, rolling friction, lubrication.

Unit IV: Work, Energy and Power (Periods 16)
Work done by a constant force and a variable force; kinetic energy, work-energy theorem, power. Notion of potential energy, potential energy of a spring, conservative forces; conservation of mechanical energy (kinetic and potential energies); non-conservative forces; motion in a vertical circle, elastic and
inelastic collisions in one and two dimensions.

Unit V: Motion of System of Particles and Rigid Body (Periods 18)
Centre of mass of a two-particle system, momentum conservation and centre of mass motion. Centre of mass of a rigid body; centre of mass of uniform rod.
Moment of a force, torque, angular momentum, conservation of angular momentum with some examples.

Centre of mass of a two-particle system, momentum conservation and centre of mass motion. Centre
of mass of a rigid body; centre of mass of uniform rod.
Moment of a force, torque, angular momentum, conservation of angular momentum with some
examples.

Equilibrium of rigid bodies, rigid body rotation and equation of rotational motion, comparison of linear
and rotational motions; moment of inertia, radius of gyration. Values of M.I. for simple geometrical objects
(no derivation). Statement of parallel and perpendicular axes theorems and their applications.

Unit VI: Gravitation (Periods 14)
Kepler’s laws of planetary motion. The universal law of gravitation. Acceleration due to gravity and its
variation with altitude and depth.
Gravitational potential energy; gravitational potential. Escape velocity, orbital velocity of a satellite.
Geostationary satellites.

Unit VII: Properties of Bulk Matter (Periods 28)
Elastic behaviour, Stress-strain relationship, Hooke’s law, Young’s modulus, bulk modulus, shear,
modulus of rigidity, poisson’s ratio; elastic energy.
Pressure due to a fluid column; Pascal’s law and its applications (hydraulic lift and hydraulic brakes).
Effect of gravity on fluid pressure.
Viscosity, Stokes’ law, terminal velocity, Reynold’s number, streamline and turbulent flow. Critical
velocity, Bernoulli’s theorem and its applications.
Surface energy and surface tension, angle of contact, excess of pressure, application of surface tension
ideas to drops, bubbles and capillary rise.
Heat, temperature, thermal expansion; thermal expansion of solids, liquids, and gases. Anomalous
expansion. Specific heat capacity: Cp, Cv – calorimetry; change of state – latent heat.
Heat transfer – conduction and thermal conductivity, convection and radiation. Qualitative ideas of
Black Body Radiation, Wein’s displacement law, and Green House effect.
Newton’s law of cooling and Stefan’s law.

Unit VIII: Thermodynamics (Periods 12)
Thermal equilibrium and definition of temperature (zeroth law of Thermodynamics). Heat, work and
internal energy. First law of thermodynamics. Isothermal and adiabatic processes.
Second law of thermodynamics: Reversible and irreversible processes. Heat engines and refrigerators.

Unit IX: Behaviour of Perfect Gas and Kinetic Theory (Periods 8)
Equation of state of a perfect gas, work done on compressing a gas.
Kinetic theory of gases: Assumptions, concept of pressure. Kinetic energy and temperature; rms
speed of gas molecules; degrees of freedom, law of equipartition of energy (statement only) and application
to specific heat capacities of gases; concept of mean free path, Avogadro’s number.

Unit X: Oscillations and Waves (Periods 28)
Periodic motion – period, frequency, displacement as a function of time. Periodic functions. Simple
harmonic motion (SHM) and its equation; phase; oscillations of a spring – restoring force and force constant;
energy in SHM – kinetic and potential energies; simple pendulum – derivation of expression for its time
period; free, forced and damped oscillations (qualitative ideas only), resonance.
Wave motion. Longitudinal and transverse waves, speed of wave motion. Displacement relation for a
progressive wave. Principle of superposition of waves, reflection of waves, standing waves in strings and
organ pipes, fundamental mode and harmonics. Beats. Doppler effect.

PRACTICALS
Total Periods 60
Section A
Experiments
1. To measure diameter of a small spherical/cylindrical body using Vernier callipers.
2. To measure internal diameter and depth of a given beaker/calorimeter using Vernier callipers and
hence find its volume.
3. To measure diameter of a given wire using screw gauge.
4. To measure thickness of a given sheet using screw gauge.
5. To measure volume of an irregular lamina using screw gauge.
6. To determine radius of curvature of a given spherical surface by a spherometer.
7. To determine the mass of two different objects using a beam balance.
8. To find the weight of a given body using parallelogram law of vectors.
9. Using a simple pendulum, plot L-T and L-T2 graphs. Hence find the effective length of a second’s
pendulum using appropriate graph.
10. To study the relationship between force of limiting friction and normal reaction and to find the
coefficient of friction between a block and a horizontal surface.
11. To find the downward force, along an inclined plane, acting on a roller due to gravitational pull of
the earth and study its relationship with the angle of inclination () by plotting graph between force
and sin .

Activities
1. To make a paper scale of given least count, e.g. 0.2 cm, 0.5 cm.
2. To determine mass of a given body using a metre scale by principle of moments.
3. To plot a graph for a given set of data, with proper choice of scales and error bars.
4. To measure the force of limiting friction for rolling of a roller on a horizontal plane.
5. To study the variation in the range of a jet of water with the angle of projection.
6. To study the conservation of energy of a ball rolling down on inclined plane (using a double
inclined plane).
7. To study dissipation of energy of a simple pendulum by plotting a graph between square of
amplitude and time.

Section B
Experiments
1. To determine Young’s modulus of elasticity of the material of a given wire.
2. To find the force constant of a helical spring by plotting a graph between load and extension.
3. To study the variation in volume with pressure for a sample of air at constant temperature by
plotting graphs between P and V, and between P and 1/V.
4. To determine the surface tension of water by capillary rise method.
5. To determine the coefficient of viscosity of a given viscous liquid by measuring the terminal velocity
of a given spherical body.
6. To study the relationship between the temperature of a hot body and time by plotting a cooling
curve.
7. To determine specific heat capacity of a given (i) solid (ii) liquid, by method of mixtures.
8. (i) To study the relation between frequency and length of a given wire under constant tension
using sonometer.
(ii) To study the relation between the length of a given wire and tension for constant frequency
using sonometer.
9. To find the speed of sound in air at room temperature using a resonance tube by two resonance
positions.

Activities
1. To observe change of state and plot a cooling curve for molten wax.
2. To observe and explain the effect of heating on a bi-metallic strip.
3. To note the change in level of liquid in a container on heating and interpret the observations.
4. To study the effect of detergent on surface tension of water by observing capillary rise.
5. To study the factors affecting the rate of loss of heat of a liquid.
6. To study the effect of load on depression of a suitably clamped meter scale loaded at (i) at its end
(ii) in the middle.

CLASS XII (THEORY)
(Total Periods: 180)
Unit I: Electrostatics (Periods 25)
Electric charges and their conservation. Coulomb’s law – force between two point charges, forces
between multiple charges; superposition principle and continuous charge distribution.
Electric field, electric field due to a point charge, electric field lines; electric dipole, electric field due to
a dipole; torque on a dipole in a uniform electric field.
Electric flux, statement of Gauss’s theorem and its applications to find field due to infinitely long
straight wire, uniformly charged infinite plane sheet and uniformly charged thin spherical shell (field inside
and outside).

Electric potential, potential difference, electric potential due to a point charge, a dipole and system of
charges; equipotential surfaces, electrical potential energy of a system of two point charges and of electric
dipoles in an electrostatic field.
Conductors and insulators, free charges and bound charges inside a conductor. Dielectrics and electric
polarisation, capacitors and capacitance, combination of capacitors in series and in parallel, capacitance
of a parallel plate capacitor with and without dielectric medium between the plates, energy stored in a
capacitor, Van de Graaff generator.

Unit II: Current Electricity (Periods 22)
Electric current, flow of electric charges in a metallic conductor, drift velocity and mobility, and their
relation with electric current; Ohm’s law, electrical resistance, V-I characteristics (linear and non-linear),
electrical energy and power, electrical resistivity and conductivity.
Carbon resistors, colour code for carbon resistors; series and parallel combinations of resistors;
temperature dependence of resistance.
Internal resistance of a cell, potential difference and emf of a cell, combination of cells in series and in
parallel.
Kirchhoff ’s laws and simple applications. Wheatstone bridge, metre bridge.
Potentiometer – principle and applications to measure potential difference, and for comparing emf of
two cells; measurement of internal resistance of a cell.

Unit III: Magnetic Effects of Current and Magnetism (Periods 25)
Concept of magnetic field, Oersted’s experiment. Biot - Savart law and its application to current
carrying circular loop.
Ampere’s law and its applications to infinitely long straight wire, straight and toroidal solenoids. Force
on a moving charge in uniform magnetic and electric fields. Cyclotron.
Force on a current-carrying conductor in a uniform magnetic field. Force between two parallel currentcarrying
conductors – definition of ampere. Torque experienced by a current loop in a magnetic field;
moving coil galvanometer – its current sensitivity and conversion to ammeter and voltmeter.
Current loop as a magnetic dipole and its magnetic dipole moment. Magnetic dipole moment of a
revolving electron. Magnetic field intensity due to a magnetic dipole (bar magnet) along its axis and
perpendicular to its axis. Torque on a magnetic dipole (bar magnet) in a uniform magnetic field; bar magnet
as an equivalent solenoid, magnetic field lines; Earth’s magnetic field and magnetic elements.
Para-, dia- and ferro - magnetic substances, with examples.
Electromagnets and factors affecting their strengths. Permanent magnets.

Unit IV: Electromagnetic Induction and Alternating Currents
(Periods 20)
Electromagnetic induction; Faraday’s law, induced emf and current; Lenz’s Law, Eddy currents. Self
and mutual inductance.
Alternating currents, peak and rms value of alternating current/voltage; reactance and impedance; LC
oscillations (qualitative treatment only), LCR series circuit, resonance; power in AC circuits, wattless
current.
AC generator and transformer.

Unit V: Electromagnetic Waves (Periods 4)
Need for displacement current.
Electromagnetic waves and their characteristics (qualitative ideas only). Transverse nature of
electromagnetic waves.
Electromagnetic spectrum (radio waves, microwaves, infrared, visible, ultraviolet, x-rays, gamma
rays) including elementary facts about their uses.

Unit VI: Optics (Periods 30)
Reflection of light, spherical mirrors, mirror formula. Refraction of light, total internal reflection and its
applications, optical fibres, refraction at spherical surfaces, lenses, thin lens formula, lens-maker’s formula.
Magnification, power of a lens, combination of thin lenses in contact combination of a lens and a mirror.
Refraction and dispersion of light through a prism.
Scattering of light – blue colour of the sky and reddish appearance of the sun at sunrise and sunset.
Optical instruments: Human eye, image formation and accommodation, correction of eye defects
(myopia and hypermetropia) using lenses.
Microscopes and astronomical telescopes (reflecting and refracting) and their magnifying powers.
Wave optics: Wavefront and Huygens’ principle, reflection and refraction of plane wave at a plane
surface using wavefronts.
Proof of laws of reflection and refraction using Huygens’ principle.
Interference, Young’s double hole experiment and expression for fringe width, coherent sources and
sustained interference of light.
Diffraction due to a single slit, width of central maximum.
Resolving power of microscopes and astronomical telescopes. Polarisation, plane polarised light;
Brewster’s law, uses of plane polarised light and Polaroids.

Unit VII: Dual Nature of Matter and Radiation (Periods 8)
Photoelectric effect, Hertz and Lenard’s observations; Einstein’s photoelectric equation – particle
nature of light.
Matter waves – wave nature of particles, de Broglie relation. Davisson-Germer experiment
(experimental details should be omitted; only conclusion should be explained.)

Unit VIII: Atoms and Nuclei (Periods 18)
Alpha - particle scattering experiment; Rutherford’s model of atom; Bohr model, energy levels,
hydrogen spectrum. Composition and size of nucleus, atomic masses, isotopes, isobars; isotones.
Radioactivity – alpha, beta and gamma particles/rays and their properties; radioactive decay law.
Mass-energy relation, mass defect; binding energy per nucleon and its variation with mass number; nuclear
fission and fusion.

Unit IX: Electronic Devices (Periods 18)
Energy bands in solids (qualitative ideas only), conductors, insulators and semiconductors;
semiconductor diode – I-V characteristics in forward and reverse bias, diode as a rectifier; I-V characteristics
of LED, photodiode, solar cell, and Zener diode; Zener diode as a voltage regulator. Junction transistor,

transistor action, characteristics of a transistor; transistor as an amplifier (common emitter configuration)
and oscillator. Logic gates (OR, AND, NOT, NAND and NOR). Transistor as a switch.

Unit X: Communication Systems (Periods 10)
Elements of a communication system (block diagram only); bandwidth of signals (speech, TV and
digital data); bandwidth of transmission medium. Propagation of electromagnetic waves in the atmosphere,
sky and space wave propagation. Need for modulation. Production and detection of an amplitude-modulated
wave.

Practicals
Total Periods 60
Section A
Experiments
1. To find resistance of a given wire using metre bridge and hence determine the specific resistance
of its material.
2. To determine resistance per cm of a given wire by plotting a graph of potential difference versus
current.
3. To verify the laws of combination (series/parallel) of resistances using a metre bridge.
4. To compare the emf ’s of two given primary cells using potentiometer.
5. To determine the internal resistance of given primary cell using potentiometer.
6. To determine resistance of a galvanometer by half-deflection method and to find its figure of
merit.
7. To convert the given galvanometer (of known resistance of figure of merit) into an ammeter and
voltmeter of desired range and to verify the same.
8. To find the frequency of the ac mains with a sonometer.

Activities
1. To measure the resistance and impedance of an inductor with or without iron core.
2. To measure resistance, voltage (ac/dc), current (ac) and check continuity of a given circuit using
multimeter.
3. To assemble a household circuit comprising three bulbs, three (on/off) switches, a fuse and a
power source.
4. To assemble the components of a given electrical circuit.
5. To study the variation in potential drop with length of a wire for a steady current.
6. To draw the diagram of a given open circuit comprising at least a battery, resistor/rheostat, key,
ammeter and voltmeter. Mark the components that are not connected in proper order and correct
the circuit and also the circuit diagram.

Section B
Experiments
1. To find the value of v for different values of u in case of a concave mirror and to find the focal
length.
2. To find the focal length of a convex mirror, using a convex lens.
3. To find the focal length of a convex lens by plotting graphs between u and v or between 1/u and
1/v.
4. To find the focal length of a concave lens, using a convex lens.
5. To determine angle of minimum deviation for a given prism by plotting a graph between the angle
of incidence and the angle of deviation.
6. To determine refractive index of a glass slab using a travelling microscope.
7. To find refractive index of a liquid by using (i) concave mirror, (ii) convex lens and plane mirror.
8. To draw the I-V characteristics curves of a p-n junction in forward bias and reverse bias.
9. To draw the characteristics curve of a zener diode and to determine its reverse break down
voltage.
10. To study the characteristics of a common-emitter npn or pnp transistor and to find out the values
of current and voltage gains.

Activities
1. To identify a diode, an LED, a transistor, and IC, a resistor and a capacitor from mixed collection
of such items.
2. Use of multimeter to (i) identify base of transistor, (ii) distinguish between npn and pnp type
transistors, (iii) see the unidirectional flow of current in case of a diode and an LED, (iv) check
whether a given electronic component (e.g. diode, transistor or IC) is in working order.
3. To study effect of intensity of light (by varying distance of the source) on an LDR.
4. To observe refraction and lateral deviation of a beam of light incident obliquely on a glass slab.
5. To observe polarization of light using two polaroids.
6. To observe diffraction of light due to a thin slit.
7. To study the nature and size of the image formed by (i) convex lens (ii) concave mirror, on a
screen by using a candle and a screen (for different distances of the candle from the lens/mirror).
8. To obtain a lens combination with the specified focal length by using two lenses from the given set
of lenses.