2023 2024 Student Forum > Management Forum > Main Forum

 
  #2  
9th October 2014, 09:10 AM
Super Moderator
 
Join Date: Apr 2013
Re: ISRO Exam Question Paper

Here is the list of few questions of ISRO entrance Exam Question Paper which you are looking for .

1) Special software to craete a job queue is called
a) driver
b) spooler
c) interpreter
d) linkage editer

2)When a process is rolled back as a result of deadlock the difficulty arises is
a) Starvation
b) System throughput
c) low device utilization
d) cycle stealing

3)On recieving an interrupt from an I/O device the CPU
a) Halts for a predefined time.
b) Branches off the interrupt service routine after completion off the current instruction.
c) Branches off to the interrupt service routine immediately.
d) hands over the control of address bus and data bus to the interrupting service.

4) Which of the following is true of the auto increment addressing mode?
1. It is useful in creating sef relocating code.
2)If it is induced in an instruction set architecture , than an additional ALU is required for effective address calculation.
3) The amount of increment depends on the size of the data item accessed.

a) 1 only.
b)2 only
c) 3 only
d) 2 and 3 only

5) Theprimary purpose of an operating system is
a) To make the most efficient use of the computer hardware.
b) to allow people to use the computer.
c) To make the system programmers employed.
d) to make computers easy to use.

6)consider the cpu intensive processes which require 10,20,30 time units and arrive at time 0,2,6 respectively.how many context switches are needed if the operating system impements a shortest remaining time first sceduling algorithm?Do not count the context switches at the time 0 and end.
a) 1
b) 2
c) 3
d) 4

7) consider a system having n resources of the same type.These resources are shared by 3 processes A,B,C .These have peak demands of 3,4,6 respectively.For what value of n deadlock won't occour.
a) 15
b) 9
c) 10
d) 13

8) In which addressing mode the effective address of the operand is computed by adding a constant value to the content of the register?
a) absolute mode.
b) indirect mode
c) immediate mode
d) index mode

9)the process of organizing the memory into two banks to allow 16 bit and 8 bit data operation is called
a) bank switching
b) indexed mapping
c) two way memory interleaving
d) memory segmentation

10)a one dimensional array A has indices 1-75.Each element is a string and takes up three memory words. The array is stored in location 1120 decimal. The starting address of A[49] is
a) 1267
b) 1164
c) 1264
d) 1169

11) The microsystems stored in the control memory of a processor have a width of 26 bits. Each microinstruction is divided into three fields : a microoperation field of 13 bits, a next address field(X), and a MUX select field(Y). There are 8 status bits in the inputs of the MUX.How many bits are there in the X and Y fields and what is the size of the control memory in number of words?
a) 10,3,1024
b) 8,5,256
c) 5,8,2048
d) 10,3,512

12)The use of multiple register windows with overlap causes a reduction in the number of memory accesses for
1.function locals and parameters
2. register saves and restores.
3. instruction fetches.
a) 1 only
b) 2 only
c) 3 only
d) 1,2,and 3

13)Which of the following about relative addressing mode is false?
a) it enables reduced instruction size.
b) it allows indexing of array element with same instruction.
c) it enabkles easy relocation of data.
d) it enables faster address calculation than absulute addressing.

14)Substitution of values for names (whose values are constants) is done in '
a) local optimization
b) loop optimization
c) constant folding
d) strength reduction

15)A root a of eq f(x)=0 can be computed to any degree of accuracy if a good initial approximation x0 is chosen for which
a) f(x0)>0
b) f(x0)f''(x0)>0
c) f(x0)f''(x0)<0
d) f''(x0)>0

16) consider the polynomial p(x)=a0+a1x+a2x*x+a3x*x*x. The mininum number of multipliations needed to evaluate p on an input x is
a) 3
b) 4
c) 6
d) 9

17)Activities which ensure that the software that has been built , is tracable tocustomer is covered as part of
a) verification
b) validation
c) maintainnace
d) modeling

18) A testing method which is normally used as the acceptance test for a software system is
a) regression testing
b) integration testing
c) unit testing
d) system testing

19)A locked database file cab be
a) accessed by only one user
b) modified by the users with the correct password.
c) used to hide the sencitive information.
d) updated by more than one user
  #3  
10th October 2014, 08:05 AM
Unregistered
Guest
 
ISRO Exam Question Paper

Will you please provide the Question Paper of ISRO Exam ?
  #4  
10th October 2014, 09:30 AM
Super Moderator
 
Join Date: Apr 2013
Re: ISRO Exam Question Paper

Here is the list of few questions of ISRO Exam Question Paper which you are looking for .

Q. Power diode is generally made from
a) Silicon
b) Germanium
c) Both
d) None of these

Q. When the both junction of NPN diode is reverse biased, then the diode is in which mode
a) Active
b) Cutoff
c) Saturation
d) inverted

Q. Which transistor mode gives the inverted output
a) Common Emitter
b) Common Base
c) Common Collector
d) None of these

Q. Which coupling gives the higher gain in case of amplifier
a) Capacitor coupling
b) Impedance coupling
c) Transformercoupling

Q. Which distortion is least objectionable in audio amplification
a) Phase
b) Frequency
c) Harmonic
d) Intermediation

Q. A narrow band amplifier has a band pass nearly…………of central frequency
a) 33.3%
b) 10%
c) 50%

Q. Phase shift oscillator consists
a) RL
b) RC
c) RLC

Q. Multivibrater Produces
a) Sine wave
b) Square wave
c) Smooth wave
d) sawtooth

Q. Convert the 101101 Binary number into octal no
a) 65
b) 55
c) 51
d) 45

Ans: 55

Q. 10 in BCD
a) 10100
b) 1100
c) 010111
d) None of these

Ans: None of these

Q. Which PNP device has a terminal for synchronizing purpose
a) SCS
b) Triac
c) Diac
d) SUS

Q. Addition of indium in semiconductor crystal makes
a) PNP
b) NPN

Q. Free electron exists in which band
a) 1
b) 2
c) 3
d) Conduction band

Q. Ripple factor of half wave rectifier
a) 1.21
b) 0.48
c) 0.5

Q. Transistor that can be used in enhancement mode
a) NPN
b) UJT
c) JFET
d) MOSFET

Q. Following contributes to harmonic distortion in Amplifier
a) +Ve feedback
b) –Ve feedback
c) Defective active device

Q. High cutoff frequency
a) CB
b) CC
c) CE

Q. Which is used as data selector?
a) Encoder
b) Decoder
c) modulator
d) Demodulator

Q. Read write capable memory
a) RAM
b) ROM
c) Both
d) None of these

Q.the radix or base of hexadecimal number system is ———–
a) 8
b) 16
c) 5
d) none of these

Ans: 16

Q.the no of 1’s in the binary representation of the expression 162*9+162*7+16*5+3 are
a) 10
b) 23
c) 6
d) 4

Q. the no of latches in F/F are ——-
a) 1
b) 2
c) 3
d) 4

Q.how many flip-flops are required to construct Mod -12 counter
a) 5
b) 4
c) 12
d) none

Ans: 4

Q. which logic gate has the output is compliment of its input ———-
a) OR
b) AND
c) NOT
d) X-OR

Ans: NOT

Q.no.of 2-input multiplexers needed to construct a 210 input multiplexer…….
a) 12
b) 31
c) 20
d) 16

Q.By adding inverters to the inputs and output of a AND gate we can obtain ……………
a) OR
b) AND
c) NOT
d) X-OR

Ans: X-OR

Q.how many NAND gates are needed to realize OR gate ————–
a) 1
b) 2
c) 3
d) 4

Ans: 3

Q.which is the first integrated logic family —————
a) RTL
b) DTL
c) TTL
d) none of these

Q. Which logic gate has output high if and only if all inputs are low ———?
a) NOR
b) NAND
c) X-NOR
d) AND

Ans: NAND

Q.According to Boolean algebra 1+A+B+C =
a) A
b) A+B+C
c) 1
d) none of these

Ans: 1

Q. If a=0x6db7 and b=0x2ae9 then what is the value of a”b————–
a) binary number for 1001.1101?
b) decimal number for 19?
c) excess-3 code for 29?

Q.what is the value of A’+1 ?
a) A
b) A’
c) 1
d) none of these

Ans: 1

Q.2 in 4 bit number one bit indicates sign of the number then the locations are from
a) -8 to 8
b) -7 to 7
c) -16 to 16
d) None

Q.Avalanche photo diode is used when compared to PIN diode bcz
a)larger band width
b)high sensitivity
C)——-
d)——–

Q.some non zero DC voltage is to RC low pass circuit then the DC voltage in the output contains
a) Same as in input
b) Higher than input
c) Zero
d) Slightly increases

Q.if the output of the gate is always high then the gates applied to this logic are 0,0
a) NAND and EX-NOR
b) NAND and NOR
c) AND and X-NOR
d) OR and XOR

Ans:a

Q.Thermal Run away is not possible in FET bcz the flow of
a)minority careers
b)Transconductance
c)_____
d)none

Ans : minority careers

Q.which of the following is/are true about 1’s and 2’s compements:
i)In 1’s complement form. 0 has two representations
ii)in 1’s complement, the magnitude of lowest number is equal to the magnitude of highest number
iii)In 2’s complement, 0 has two representations

a) i only
b) i and ii
c) iii only
d) all of these

Q.In the hybrid parameter model of a transistor reverse transfer voltage ratio and forward transfer current ratio are respectively given by:
a) h11 and h21
b) h12 and h11
c) h21 and h11
d) None of these

Q.The largest negative no can be represented with 8 bits in 2’s compliment representation?
a)-256
b)-255
c)-127
d)-128

Ans: -128

Q. How many NAND gates required to implement AB+CD+EF
a) 1
b) 2
c) 3
d) 4

Ans: 4

Q. Transparent latch is seen in which type of flip flop
a) SR FF
b) D FF
c) JK FF
d) D FF

Ans: D FF

Q. Odd parity generator uses which logic?
a) Digital
b) Analog
c) Sequential
d) none

Q. Which type of ADC is fastest?
a) SARC
b) Counter type
c) Intigrated type
d) Flash

ANS: Flash/Parallel

Q. Which one of the following is fastest read/writable memory?
a) PROM
b) EEPROM
c) Flash
d) none

Ans: Flash

8. In array programming which one is used
a) SISD
b) PISD
c) MISD
d) None

Q.Which one of the following has high I/p impedance
a) CC
b) CB
c) CE
d) None

Q. The maximum time allowed time for each flip flop for a mod 10 synchronous counter if each flip flop delay is 25ns.
a) 25 ns
b) 50 ns
c) 100 ns
d) none

Q. The resolution for a DAC is given by 0.4% then no. of bits of DAC is
a) 8- bits
b) 16- bits
c) 32- bits
d) none

Ans: 8- bits

41) The chip capacity is 256 bits, then the no.of chips required to build 1024 B memory Is
a) 32
b) 16
c) 15
d) 4

Q. Which of the following are correct?
1)A flip-flop is used to store 1-bit of information
2)Race around condition occurs in JK flip flop when both the inputs are 1
3)Master slave flip flop is used to store 2 bits of information
4)A transparent latch consists of a D- flip flop

a) 1,2,3
b) 1,3,4
c) 1,2,4
d) 2,3,4

Ans: 1,2,4

Q. output resistance of ideal OP AMP is
a) 0
b) 1
c) infinite
d) very high

ANS: 0

Q. CMRR of an OP AMP is given as 80db and Ad is 20000.Value of Acm will be
a) 4
b) 8
c) 2
d) 1

Ans: 2

Q.Si,Ge lie in ……..block of periodic table
a) III
b) V
c) IV A
d) IV B

Ans: IV A

Q.to obtain 10 mV resolution on 5 V range how many bit DAC is to be used
a) 4
b) 8
c) 16
d) 32

Q.% resolution of a 10 bit ADC
a) 1.588%
b) 0.392%
c) 0.0978%
d) 0.0244%

Ans: 0.0978%

Q.Efficiency of half wave rectifier
a) 45%
b) 50%
c) 86%
d) 100%
  #5  
26th May 2015, 09:53 AM
Unregistered
Guest
 
Re: ISRO Exam Question Paper

I am appearing in ISRO Electronics and Communication Engineering exam so I need its question paper can you please provide me this?
  #6  
26th May 2015, 09:57 AM
Super Moderator
 
Join Date: Apr 2013
Re: ISRO Exam Question Paper

ISRO stands for Indian Space Reasearch Organisation

Electronics and communication paper of ISRO contains total 80 questions all of them are multiple choice.

Candidates are given a total 90 minutes

Candidates would be awarded +3 for every correct answer and -1 for every wrong answer.


ISRO Electronics and Communication Engineering Papers





more paper detail in attached pdf file;
Attached Files
File Type: pdf ISRO Exam Question Paper.pdf (514.8 KB, 47 views)
  #7  
24th August 2015, 11:06 AM
biman bagli
Guest
 
Re: ISRO Exam Question Paper

dear,
sir you will provided the question paper of draughtsman B (mechanical) for isro exam


Quick Reply
Your Username: Click here to log in

Message:
Options

Thread Tools Search this Thread



All times are GMT +5. The time now is 12:14 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
SEO by vBSEO 3.6.0 PL2

1 2 3 4