Hal Management Trainee Interview Experience

Hie can you please provide me the general questions of the interview as well as the written paper of Hal Management Trainee exam as I am preparing for the its paper and I have not any idea of questions ask in the Hal Management Aeronotical Trainee exam?

[Shaleen]

Here I am providing you some of the interview question which are generally asked in Hal Management Trainee exam
Tell me about yourself??
Explain your project??
Area of interest
Explain sand casting,
Uses of runner, riser, gates
Explain investment cating,
Why you want to join HAL.

Apart from this on your demand only I am providing you the previous year question paper of 2012 of Hal Aeronotical Management Trainee exam

1. Air Fuel ratio in a jet engine will be of the order of
(a) 10:1 (b) 15:
(c) 20:1 (d) 60:

2. Fighter bombers use following type of engine
(a) Turbo
(b) Turbo
(c) Rocket
(d) Ram

3. Least shrinkage allowance is provided in the case of following
(a) Brass
(b) Aluminum
(c) Cast Iron
(d) Stee

4. If V is the volume of metal in a casting and A its surface area, the time of solidification will
be proportional to

(a) V, 1/A (b) V,1/A
(c ) V2 ,1/A (d) V2, 1/A

5. Fire tube boilers are limited to a maximum design working pressure of
(a) 1 kg/cm2 (b) 6 kg/cm
(C) 17 kg/cm2 (d ) 100 kg/cm

6. A dislocation represented by T
is called
(a) Positive edge dislocatio
(b) Negative edge dislocatio
(c) Positive screw dislocatio
(d) Negative screw dislocatio

7. The recrystallisation temperature of a cold worked material decreases with
(a) Increase in the degree of deformation
b) Increase in the initial grain size
(c) Increase in the temperature of cold working
(d) The presence of impurity

8. In a thyrister full converter feeding a continuous load current, what is the duration each
thyrister conducts in a cycle?
(a) 60 0 (b) 900
(c) 120 0 (d) 1800

9. In a three phase induction motor, the rotor field runs at the following speed with Respect to the
stator structure

(a) At synchronous speed in the direction of stator field
(b) At a slip speed in the direction of stator speed

Hal Aeronotical Management Trainee exam paper


HAL Aeronautical Management Trainee (Technical) MT Paper 2012
1. Air Fuel ratio in a jet engine will be of the order of:
(a) 10:1 (b) 15:1
(c) 20:1 (d) 60:1
2. Fighter bombers use following type of engine:
(a) Turbo-jet (b) Turbo-propeller
(c) Rocket (d) Ram-jet
3. Least shrinkage allowance is provided in the case of following:
(a) Brass (b) Aluminum
(c) Cast Iron (d) Steel
4. If V is the volume of metal in a casting and A its surface area, the time of solidification will
be proportional to:
(a) V, 1/A (b) V,1/A2
(c ) V2 ,1/A (d) V2, 1/A2
5. Fire tube boilers are limited to a maximum design working pressure of :
(a) 1 kg/cm2 (b) 6 kg/cm2
(C) 17 kg/cm2 (d ) 100 kg/cm2
6. A dislocation represented by T is called:
(a) Positive edge dislocation
(b) Negative edge dislocation
(c) Positive screw dislocation
(d) Negative screw dislocation
7. The recrystallisation temperature of a cold worked material decreases with:
(a) Increase in the degree of deformation
(b) Increase in the initial grain size
(c) Increase in the temperature of cold working
(d) The presence of impurity
8. In a thyrister full converter feeding a continuous load current, what is the duration each
thyrister conducts in a cycle?
(a) 60 0 (b) 90 0
(c) 120 0 (d) 180 0
9. In a three-phase induction motor, the rotor field runs at the following speed with Respect to the
stator structure:
(a) At synchronous speed in the direction of stator field
(b) At a slip speed in the direction of stator speed
(c) At synchronous speed in a direction opposite to that of stator field
(d) At zero speed
10. In the hybrid parameter model of a transistor reverse transfer voltage ratio and forward
transfer
current ratio are respectively given by:
(a) h11 and h21 (b) h12 and h11
(c) h21 and h11 (d) None of these
11. A Signal x(t) has the Fourier transform
X( ) = { 1 for | | < }W . Its first zero-crossing in time domain occurs at:
O otherwise
(a) 1/pW (b) W
( c) p/ W (d) None of these
12. Magnetic tapes are suitable to applications:
(a) When only a few records are to be accessed
(b) When most of the records are to be accessed
(c) Only when all the records are to be processed
(d) None of the above
13. A system in which 2 or more cpu's are interconnected and share a common
Main memory is called:
(a) Pipeline machine
(b) Multifunctional system
(c) Multiprocess
(d) None of these
Which one of the following is the most stable configuration of an airplane in roll?
(A) Sweep back, anhedral and low wing
(B) Sweep forward, dihedral and low wing
(C) Sweep forward, anhedral and high wing
(D) Sweep back, dihedral and high wing
Which one of the following flight instruments is used on an aircraft to determine its attitude in
flight?
(A) Vertical speed indicator
(B) Altimeter
(C) Artificial Horizon
(D) Turn-bank indicator
A supersonic airplane is expected to fly at both subsonic and supersonic speeds during its whole
flight course. Which one of the following statements is TRUE?
(A) Airplane will experience less stability in pitch at supersonic speeds than at subsonic speeds
(B) Airplane will feel no change in pitch stability
(C) Airplane will experience more stability in pitch at supersonic speeds than at subsonic speeds
(D) Pitch stability cannot be inferred from the information given
Which one of the following is favorable for an airplane operation?
(A) Tail wind in cruise and head wind in landing
(B) Tail wind both in cruise and landing
(C) Head wind both in cruise and landing
(D) Head wind in cruise and tail wind in landing
Which one of the following is TRUE with respect to Phugoid mode of an aircraft?
(A) Frequency is directly proportional to flight speed
(B) Frequency is inversely proportional to flight speed
(C) Frequency is directly proportional to the square root of flight speed
(D) Frequency is inversely proportional to the square root of flight speed
Which one of the following statements is NOT TRUE for a supersonic flow?
(A) Over a gradual expansion, entropy remains constant
(B) Over a sharp expansion corner, entropy can increase
(C) Over a gradual compression, entropy can remain constant
(D) Over a sharp compression corner, entropy increases
The cross-section of a long thin-walled member is as shown in the figure. When subjected to pure
twist, point A
(A) does not move horizontally or axially, but moves vertically
(B) does not move axially, but moves both vertically and horizontally
(C) does not move horizontally, vertically or axially
(D) does not move vertically or axially, but moves horizontally