GATE ME Question Paper

Will you please provide the question paper of GATE Mechanical Engineering exam?

[Kiran Chandar]

Here I am providing few questions of GATE Mechanical Engineering exam which you are looking for .

1.The angle between two unit-magnitude coplanar vectors P(0.86, 0.500,0) and
Q(0.259, 0.956, 0) will be
(a) 0o (b) 30o (c) 45o (d) 60o

2. The figure shows a pin-jointed plane truss loaded at the point M by hanging a
mass of 100 kg. The member LN of the truss is subjected to a load of
(a) 0 Newton
(b) 490 Newtons in compression
(c) 981 Newtons in compression
(d) 981 Newtons in tension

3. Two mating spur gears have 40 and 120 teeth respectively. The pinion rotates
at 1200 rpm and transmits a torque of 20 N.m. The torque transmitted by the
gear is
(a) 6.6 Nm (b) 20 Nm (c) 40 Nm (d) 60 Nm







For more questions , here is the attachment

Will you please provide the Question Paper of the GATE Mechanical Engineering exam ?

Will you please provide the Question Paper of the GATE Mechanical Engineering exam ?

[Raman Vij]

Here is the list of few questions of GATE Mechanical Engineering exam which you are looking for.

1. The process of hot extrusion is used to produce

(a) curtain rods made of aluminium
(b) steel pipes for domestic water supply
(c) stainless steel tubes used in furniture.
(d) large size pipes used in city water mains

2. In deep drawing of sheets, the values of limiting draw ratio depends on

(a) percentage elongation of sheet metal
(1’) yield strength of sheet metal
(c) type of press used
(d) thickness of sheet

3. The electrodes used in arc welding arc coated. This coating is not expected to

(a) provide protective atmosphere to weld
(b) stabilize the are
(c) add alloying elements

(d) prevents electrode from contamination. 1.8 Streamlines, pathlines and streaklines are virtu lly identical for

(4) Uniform flow (b) Flow of ideal fluids
(c) Steady flow (d) Non uniform flow

For information , here is the attachment

GATE Mechanical Engineering exam paper

[Raman Vij]

Here is the list of few questions of GATE Mechanical Engineering exam which you are looking for.

1. The process of hot extrusion is used to produce

(a) curtain rods made of aluminium
(b) steel pipes for domestic water supply
(c) stainless steel tubes used in furniture.
(d) large size pipes used in city water mains

2. In deep drawing of sheets, the values of limiting draw ratio depends on

(a) percentage elongation of sheet metal
(1’) yield strength of sheet metal
(c) type of press used
(d) thickness of sheet

3. The electrodes used in arc welding arc coated. This coating is not expected to

(a) provide protective atmosphere to weld
(b) stabilize the are
(c) add alloying elements

(d) prevents electrode from contamination. 1.8 Streamlines, pathlines and streaklines are virtu lly identical for

(4) Uniform flow (b) Flow of ideal fluids
(c) Steady flow (d) Non uniform flow

For information , here is the attachment

GATE ME Question Paper