2023 2024 Student Forum > Management Forum > Main Forum

 
  #1  
27th July 2014, 08:14 AM
Unregistered
Guest
 
Bharat Heavy Electricals Ltd Supervisor Trainee Exam syllabus and paper pattern

Hy I am taking parting the Bharat Heavy Electricals Ltd Supervisor Trainee Exam and for this reason I need the papers and paper pattern of the exam so will you provide me that?
Similar Threads
Thread
Bharat Heavy Electricals Limited ( Bhel )
Bharat Heavy Electricals Limited At NSE
History Of Bharat Heavy Electricals Limited
Bharat Heavy Electricals Limited Projects
Bharat Heavy Electricals Limited Through Gate
Bharat Heavy Electricals Ltd Vellore
CMD Bharat Heavy Electricals Limited
Bharat Heavy Electricals Limited New Delhi
Bharat Heavy Electricals Limited
Bharat Heavy Electricals Limited Engineer Trainee GATE cut off of previous year
Bharat Heavy Electricals Limited entrance exam previous year question papers
Bharat Heavy Electricals Ltd Engineer Trainee Exam syllabus
Bharat Heavy Electricals Ltd Mechanical Supervisor Trainee previous year question pap
Syllabus of Electronics branch for Bharat Heavy Electricals Limited
Bharat Heavy Electricals Ltd Supervisor Trainee exam syllabus
Bharat Heavy Electricals Ltd Supervisor Trainee of last year question papers of Elect
Bharat Heavy Electricals Ltd Supervisor Trainee previous year question papers
Bharat Heavy Electricals Ltd Electronics and Communication Engineering syllabus or ex
Bharat Heavy Electricals Ltd Supervisor Trainee Exam previous year question papers
Bharat Heavy Electricals Limited entrance exam pattern
  #2  
28th July 2014, 07:08 AM
Super Moderator
 
Join Date: Apr 2013
Re: Bharat Heavy Electricals Ltd Supervisor Trainee Exam syllabus and paper pattern

You not have specified for which branch you need Supervisor Trainee Exam papers and pattern so here I am providing you Mechanical Branch Supervisor Trainee Papers.

Some content of the file has been given here:

Bharat Heavy Electricals Ltd Supervisor Trainee Exam papers

1)Unit of Entropy (J/kg K or kJ/kg K)
2)A mass of 100kg is falling from a height of 1 m and penetrates the sand into for 1 m. What is the
resistance force given by sand.
3)Ratio of specific heats of air. (1.41)
4)A body weighs 3 kg in air. If it is submerged in a liquid, it weighs 2.5 kg. What is the specific gravity
of the liquid.
5)Two cars travell in same direction at 40 km/hr at a regular distance. A car comes in a opposite
direction in 60km/hr. It meets each car in a gap of 8 seconds. What is the distance between them?
6)A simple problem involing in hoops stress. For sphere: M= [3/2]*p*V*[density of pressure vessel
material/Maximum working stress it can tolerate] For Thin walled pressure walls: Hoops stress or
stress in the radial direction =p*r/2t
7)A problem in force calculation in a body moving in a inclined surface.
8)Composition of bronze. (Copper+zinc)
9)Compostion of stainless steel.(iron+chromium+nickel+carbon)
10)CI is manifactured in which process. (cupola process)
11)What percentage of carbon is preset in pig iron. (4.5 to 6%)
12)Water is available at 10m height. What is the pressure available? (pressure=density*g*height;
p=1000*9.81*10; p=98100N/m2)
13)What will happen if the speed of the centrifugal pump doubles.
14)The unit eV is widely used in ? (Nuclear and atomic physics)
15)What will happen to the resistance, when the diameter of the conductor is doubled?
16)The power comsumed by a electrical device is 1000W at 250V, What is the resistance in the device?
(Power= Voltage*current; Current=Power/Voltage, Current,I=1000/250=4
amps. V=IR, Therefore R=250/4=62.5 ohms)
17)Why DC current is not used in transformer.
18)On what principle the sonar/ radar( I dont remember) works?
19)Bending moment diagram for the UDL is in what shape?
20)Function of the distributor in petrol vehicles? (Spark timing)
21)Which is not present in CI engines? (carburrettor)
22)What will happen if one cylinder recieves more amount of fuel spray from injectors than other
injectors?
23)Purpose of draft tube in hydraulic turbines? (The purpose of a draft tube is toconvert some of the
kinetic energy of the flow from the runner (the rotating part of the turbine) intopressure energy and
thereby increase the efficiency ofthe hydro power turbine. )
24)What is the effect or reheater in the gas turbine? (The advantage of reheater is significantly
increased thrust; the disadvantage is it has very high fuel consumption and inefficiency)
25)Problems in involving with fricition coefficient.
26)Factor of safety = Yeild stress/Working stress.
27)Which is the example of non parallel power transmission (Universal coupling)
28)For perpendicular shafts worm gear is used.
29)A planet gear with 25 teeth is meshed with a sun gear of 100 teeth. Both are connected using a arm.
How many rotations are needed for planet gear to complete one rotation around the sun gear?
30)What is equivalent spring constant for spring in parallel?
31) Some questions was asked related to boundry layer and vortex flow.
32) 5 questions were asked in PERT, Process planning, Product planning, Break even analysis.
33)How are tungsten and sintered composite materials are machined? (Electro Discharge Machining,
EDM)

BHEL 2010 Sample Placement paper

1. Sintered and tungsten carbides can be machined by: = EDM

2. What kind of abrasive cut off wheel should be used to cut concrete, stone and masonry? =Diamond grit.

3. In break-even analysis, total cost consists of: = Fixed cost + Variable cost.

4. The amount deducted from the salary of workers towards employees provident fund is : =deposited in the account of worker with Provident Fund Commissioner.

5. PERT is: = event oriented technique

6. Bar charts are suitable for: = minor works.

7. ? on a PERT/CPM chart represents: = a significant event representing some mile-stone

8. Electron volt is the unit of : = Energy.

9. Seamless tubes are made by?

10. Reheating in gas turbine results in: = increase of work ratio and decrease of thermal efficiency.

11. Why DC current is not used in transformer?

12. What is the purpose of draft tube in hydraulic turbines: = to convert the kinetic energy into pressure energy.

13. A mass of 100kg is falling from a height of 1m and penetrates the sand to 1m. what is the resistance force of the sand?

14. Two cars travel in the same direction at 40km/hr at a regular distance. A car comes in the opposite direction at 60km/hr. It meets each car in a gap of 8 seconds. What is the distance between the two cars?

15. A projectile is fired at an angle ? to the vertical. Its horizontal range will be maximum when ? is . =450

16. An elevator weighing 1000kg attains an upward velocity of 4m/sec in two seconds with uniform acceleration. The tension in the supporting cables will be = 1200kg.

17. A 13m ladder is placed against a smooth vertical wall with its lower end 5m from the wall. What should be the co-efficient of friction between ladder and floor so that it remains in equilibrium. = 0.21

18. A car is moving with a velocity of 60km/hr and possesses energy of 5×105 joules. The mass of the car will be. =3000kg.

19. If l is the span of a light suspension bridge whose each cable carries total weight (w) and the central diop is y, the horizontal pull at each support is: = wl/y OR

20. A beam of length l, having uniform load w kg/unit length is supported freely at the ends. The moments at mid span will be: = wl2/8.

21. A boiler shell 200cm dia and plate thickness 1.5cm is subjected to internal pressure of 1.5MN/m2, then the hoop stress will be. = 100N/m2

22. 100KW is to be transmitted by each of two separate shafts. A is turning at 250rpm and B at 300rpm. Which shaft must have greater diameter.: = B

23. Two identical leaf springs of spring constant k are arranged like cantilevers in parallel and attached at free end by a spring of spring constant k. The equivalent spring constant of combination is; = 1.5k.

24. Automobile steering gear is an example of: = lower pair.

25. The type of coupling used to join two shafts whose axes are neither in same straight line nor parallel, but intersect is. = Universal coupling.

26. The ratio of two specific heats of air is equal to. = 1.41

27. A perfect gas at 270C is heated at constant pressure till its volume is double. The final temperature is = 3270C

28. An engine operates between temperature of 9000K and T2 and another engine between T2 and 8000K. For both to do equal work, value of T2 will be. = 6500K

29. Internal energy of a substance depends on = Temperature

30. Work done in compressing 1kg of gas adiabatically from p1,V1,T1 to p2, V2, T2 is equal to = Cv(T2-T1)

31. The unit of entropy is = J/kg 0K

32. Indicated power of a 4-stroke engine is equal to = pLAN/2

33. Which of the following is not an internal combustion engine : a) 2 stroke petrol engine b)4 stroke petrol engine c) Diesel engine d) steam engine e) Gas turbine. = (d)

34. If one cylinder of a diesel engine receives more fuel than the others, then for that cylinder the: a) exhaust will be smoky b) piston rings would stick into piston grooves c) exhaust temperature will be high d) engine starts overheating e) all of the above. = (e)

35. The spark plug gap is normally maintained at: = 0.45 to 0.6mm

36. A distributor in spark ignition engines performs the function of : = Providing the correct firing order in engine

37. Which of the following does not relate to C.I. engine:: a) fuel pump b) fuel injector c) governor d) carburetor e) flywheel = (d)

38. Air fuel ratio in a jet engine is = 60:1

39. What is the value of Prandtl No.?

40. In domestic refrigerator, the tubes at the back of the refrigerator are: a) evaporator b) condenser c) capillary tubes d)………

41. Which refrigerants has the highest critical point temperature. = Freon-11

42. Wet bulb temperature is. = indication of amount of moisture in air

43. On psychrometric chart, dry bulb temperature lines are. = Vertical

44. Surface tension has the units. = newtons/m

45. The line of action of the buoyant force acts through the. = centroid of the displaced volume of fluid

46. A pressure of 25m of head of water is equal to. =245kN/m2

47. For a submerged body to be in stable equilibrium, the centre of gravity should be. =Below the centre of buoyancy.

48. The actual velocity at vena contracta for flow through an orifice from a reservoir of height H=?. =Cvv2gH

49. A body weighing 2kg in air weights 2.5kg when submerged in water. Its specific gravity is. = 6

50. In a free vortex motion: = each particle moves in a circular path with a speed varying inversely as the distance from the centre.

51. A centrifugal pump has speed-1000rpm, Flow-1200l.p.m, Head-20m, Power-5H.P. If its speed is increased to 1500rpm, new flow will be.: = 1800l.p.m

52. Runaway speed of a hydraulic turbine is: = the speed if the turbine runner is allowed to revolve freely without load and with the wicket gates wide open.

53. 10m of water column is equal to = 100kN/m2

54. M.I. of a circular area about an axis perpendicular to the area is: = pr4/2

55. To transmit power from one rotation shaft to another whose axes are neither parallel nor intersecting, use: = Spiral gear.

56. A gear having 100 teeth is fixed and another gear having 25 teeth revolves around it, the centre lines of both gears being joined by an arm. How many revolutions will be made by gear of 25 teeth for one revolution of arm. = 5 rev.

57. The secondary critical speed of a shaft occurs at: = twice the speed of primary critical speed.

58. Brittle coating technique is used for: = experimental stress analysis.

58. Factor of safety is the ratio of: = yield stress/working stress.

59. Type of gear used for non-intersection perpendicular shafts: = Hypoid gears.

60. Corrosion resistance of steel is increased by adding: = Chromium & Nickel

61. The product of Cupola is called: = cast iron

62. Brinell tester uses a hardness steel ball of size: = 10mm.

Technical paper
1) How many links in slider crank mechanism?
2) Deflection of cantilever beam subjected to end point load?
3) Stress concentration factor Kf =?
4) What is the unit of BHN?
5) What is efficiency of riveted joint?
6) Composition of Munz metal?
7) One shaft is subjected to torque 1700 N-m having shear strength of 40Mpa. Determine the diameter?
8) A reversible engine is working between the 600F and 60F. Carnot efficiency is equal to =
9) Coefficient of restitution lies between =
10) Pectlet number is equal to = a)Re*Nu b)Re*Pr c)Re*Gr
11) Formula of effectiveness of heat transfer =
12) Emissivity depends on
13) Reynolds number formula
14) Production process for Al?
15) Thick metals welded by following processes…………
16) Logarithmic decrement is given by =
17) Magnification factor at resonance is given by =
18) Cutting forces decreases by = a) increasing rake angle b) decreasing rake angle c) increasing relief
rake angle
19) Some problem on Mohr’s circle radius…
20) Volumetric strain =
21) Pendulum problem Time is given length = ?
22) For undamped system Transmission Ratio is R then a) b)
23) Which is not related to CI engine = ans) spark plug
24) Cotter joint generally fail by
25) Which coupling is used for intersecting shafts?
26) No of teeth on gear and pinion is given, center distance is given, module = ?
27) Coefficient of friction and angle is given, what is ration of tension in belt?
28) What is lamis thoerm?
29) Condition for self locking ……
30) Discontinuous chips can be produced by ………….
31) For critical speed should be a)>√2 b) >√3
32) Air at 20C blows over a hot plate 50 by 75 cm maintained at 250C. The convective heat transfer
coefficient is 25W/m2. Cal the heat transfer.
33) Metacenter always lies ………….
34) Rotometer is used to measure….
35) Formula for effort of a governor……
36) Stroboscope is used to measure…..
37) What is size of A4 paper?
38) Some problem on riveted joint…..
39) Modulus of rigidity G is given by……
40) Wave properties in solids is depends on elasticity.
41) Radiation heat transfer is directly proportional to ………….
42) Escape velocity is given by √2gR
43) Kinetic energy formula….
44) Corolis component…….
45) Potent ional Energy theory is given by…………….
46) Perpendicular axis thoerm…………
47) Pappus thoerm…….
48) Center of gravity of a spherical shell……………..
49) Angle and linear dimension is given by chamfer.
50) For thick cylinders ………………..
51) N = 10 to N = 10E5 cycles then it is …. a) finite life b)infinite life
52) Value of steel young’s modulus ……
53) Endurance strength of steel equal to …………
54) Three problems on strain gauges ….
55) Three problems on vectors some related to work done….
56) Straight line mechanism…
57) Some problem springs..
58) Design on thermal stresses can be considered for a) concrete b)steel rolls c)blast furnace
59) Velocity problem it is in the vector form to find displacement?
60) Hardness is a property

BHEL Recruitment Paper Feb 2007
1. The ratio of two specific heats of air is equal to. = 1.41
2. A perfect gas at 270C is heated at constant pressure till its volume is double. The final
temperature is = 3270C
3. An engine operates between temperature of 9000K and T2 and another engine between T2 and
8000K. For both to do equal work, value of T2 will be. = 6500K
4. Internal energy of a substance depends on = Temperature
5. Work done in compressing 1kg of gas adiabatically from p1,V1,T1 to p2, V2, T2 is equal to =
Cv(T2-T1)
6. The unit of entropy is = J/kg 0K
7. Indicated power of a 4-stroke engine is equal to = pLAN/2
8. Which of the following is not an internal combustion engine : a) 2 stroke petrol engine b)4
stroke petrol engine c) Diesel engine d) steam engine e) Gas turbine. = (d)
9. If one cylinder of a diesel engine receives more fuel than the others, then for that cylinder the:
a) exhaust will be smoky b) piston rings would stick into piston grooves c) exhaust
temperature will be high d) engine starts overheating e) all of the above. = (e)
10. The spark plug gap is normally maintained at: = 0.45 to 0.6mm
11. A distributor in spark ignition engines performs the function of : = Providing the correct firing
order in engine
12. Which of the following does not relate to C.I. engine:: a) fuel pump b) fuel injector c) governor
d) carburetor e) flywheel = (d)
13. Air fuel ratio in a jet engine is = 60:1
14. What is the value of Prandtl No.?
15. In domestic refrigerator, the tubes at the back of the refrigerator are: a) evaporator b) condenser
c) capillary tubes d)………
16. Which refrigerants has the highest critical point temperature. = Freon-11
17. Wet bulb temperature is. = indication of amount of moisture in air
18. On psychrometric chart, dry bulb temperature lines are. = Vertical
19. Surface tension has the units. = newtons/m
20. The line of action of the buoyant force acts through the. =centroid of the displaced volume of
fluid
21. A pressure of 25m of head of water is equal to. =245kN/m2
22. For a submerged body to be in stable equilibrium, the centre of gravity should be. =Below the
centre of buoyancy.
23. The actual velocity at vena contracta for flow through an orifice from a reservoir of height H=?.
=Cv√2gH
24. A body weighing 2kg in air weights 2.5kg when submerged in water. Its specific gravity is. = 6
25. In a free vortex motion: = each particle moves in a circular path with a speed varying inversely
as the distance from the centre.
26. A centrifugal pump has speed-1000rpm, Flow-1200l.p.m, Head-20m, Power-5H.P. If its speed
is increased to 1500rpm, new flow will be.: = 1800l.p.m
27. Runaway speed of a hydraulic turbine is: = the speed if the turbine runner is allowed to revolve
freely without load and with the wicket gates wide open.
28. 10m of water column is equal to = 100kN/m2
29. M.I. of a circular area about an axis perpendicular to the area is: = πr4/2
30. A projectile is fired at an angle θ to the vertical. Its horizontal range will be maximum when θ is
. =450
31. An elevator weighing 1000kg attains an upward velocity of 4m/sec in two seconds with uniform
acceleration. The tension in the supporting cables will be = 1200kg.
32. A 13m ladder is placed against a smooth vertical wall with its lower end 5m from the wall.
What should be the co-efficient of friction between ladder and floor so that it remains in
equilibrium. = 0.21
33. A car is moving with a velocity of 60km/hr and possesses energy of 5x105 joules. The mass of
the car will be. =3000kg.
34. If l is the span of a light suspension bridge whose each cable carries total weight (w) and the
central diop is y, the horizontal pull at each support is: = wl/y OR
35. A beam of length l, having uniform load w kg/unit length is supported freely at the ends. The
moments at mid span will be: = wl2/8.
36. A boiler shell 200cm dia and plate thickness 1.5cm is subjected to internal pressure of 1.5MN/
m2, then the hoop stress will be. = 100N/m2
37. 100KW is to be transmitted by each of two separate shafts. A is turning at 250rpm and B at
300rpm. Which shaft must have greater diameter.: = B
38. Two identical leaf springs of spring constant k are arranged like cantilevers in parallel and
attached at free end by a spring of spring constant k. The equivalent spring constant of
combination is; = 1.5k.
39. Automobile steering gear is an example of: = lower pair.
40. The type of coupling used to join two shafts whose axes are neither in same straight line nor
parallel, but intersect is. = Universal coupling.
41. To transmit power from one rotation shaft to another whose axes are neither parallel nor
intersecting, use: = Spiral gear.
42. A gear having 100 teeth is fixed and another gear having 25 teeth revolves around it, the centre
lines of both gears being joined by an arm. How many revolutions will be made by gear of 25
teeth for one revolution of arm. = 5 rev.
43. The secondary critical speed of a shaft occurs at: = twice the speed of primary critical speed.
44. Brittle coating technique is used for: = experimental stress analysis.
45. Factor of safety is the ratio of: = yield stress/working stress.
46. Type of gear used for non-intersection perpendicular shafts: = Hypoid gears.
47. Corrosion resistance of steel is increased by adding: = Chromium & Nickel
48. The product of Cupola is called: = cast iron
49. Brinell tester uses a hardness steel ball of size: = 10mm
50. Sintered and tungsten carbides can be machined by: = EDM
51. What kind of abrasive cut off wheel should be used to cut concrete, stone and masonry?
=Diamond grit.
52. In break-even analysis, total cost consists of: = Fixed cost + Variable cost.
53. The amount deducted from the salary of workers towards employees provident fund is :
=deposited in the account of worker with Provident Fund Commissioner.
54. PERT is: = event oriented technique
55. Bar charts are suitable for: = minor works.
56. on a PERT/CPM chart represents: = a significant event representing some mile-stone
57. Electron volt is the unit of : = Energy.
58. Seamless tubes are made by?
59. Reheating in gas turbine results in: = increase of work ratio and decrease of thermal efficiency.
60. Why DC current is not used in transformer?
61. What is the purpose of draft tube in hydraulic turbines: = to convert the kinetic energy into
pressure energy.
62. A mass of 100kg is falling from a height of 1m and penetrates the sand to 1m. what is the
resistance force of the sand?
63. Two cars travel in the same direction at 40km/hr at a regular distance. A car comes in the
opposite direction at 60km/hr. It meets each car in a gap of 8 seconds. What is the distance
between the two cars?

SECTION-I----TECHNICAL
1. Critical load acting axially on a long column
Ans: (pi)2*E*I/L2
2. Relation between moment of area and radius of gyration
Ans: I=AK2
3. Cup shaped components are produced using which operation
Ans: drawing
4. A sheet of Al alloy having 2mm thickness is welded using which process
Ans: TIG
5. Two gears having teeth 18 and 40 and center distance 56…what is the module?
6. In thick cylinders, which of the following is true[*S stands for sigma*] (a) St>Sr (b) St=Sr (c)St
7. In a plane stress condition, if the centre of Mohr’s circle coincides with the origin then which is true… ….the relation between Sx and Sy is asked
8. Lame’s theorem….F1/sinA=F2/sinB=F3/sinC
9. Young’s modulus value for steel=200Gpa
10. Thermal conductivity of silver=400w/m0K
11. Fouling factor formula……F.F =1/Udirty-1/Uclean
12. Relation between notch sensitivity factor and theoretical stress concentration factor
13. Effectiveness of heat exchanger definition
14. Reynolds’s number formula
15. Clinical thermometer is which order system ….0,1,2, or 3
16. Piezometric transducer is used to find which signals—static or…. dynamic
17. Peclet number formula=Re*Pr
18. Radiation energy emitted, Eemitted=S*A*T4
19. Which of the following is not related to CI engine
(a) Fuel pump (b) carburetor (c).. (d) none
20. Two connected in series having stiffness’s K1, K2
Kequivalent=K1*K2/K1+ K2
21. Magnification factor at resonance, MF=1/2zeta
22. Coroili’s component value, =2vw
23. Hooks law holds good upto
(a)elastic point (b)UYP(c)LYP(d)Failure
24. Meshing of two gears fail if
(a)materials are different(b)
25. A beam whose one end is fixed and other is free is
(a)cantilever (b)ss(c)Udl(d)none
26. Deflection at the free end of cantilever =PL3/3EI
27. Shear stress, twisting moment given ,find diamaeter….
28. Formula for polar moment of inertia of a hollow shaft
29. Formula for logarithmic decrement
30. A problem based on the above formula
31. Two question on transmissibility(W/Wn ratio )
32. Question from vibration…mass,k given …cal frequency
33. Two more questions, one each from riveted joints and cotterjoint
34. 1BHN=N/m2
35. Temperature limits, given to find Carnot’s efficiency
36. Metacentric height is the distance between Metacentre and --------
Ans: Centre of gravity
37. Force and displacement vector given to find out the work done
38. Rota meter is used to find
(a)flow(b)velocity(c)pressure(d)density
In addition, 10-12 were asked from electrical basics.
SECTION-II------- APTITUDE
VERBAL
Antonyms (5)-Facetious, Benign…
Synonyms (5)-very easy
Fill in the blanks (5):-a bit tough
2 Comprehension passages
Correction of sentences-(5)
Reasoning (5)
This section is very easy that u can start of the exam with.
Hope this is helpful to u all.

1. The ratio of two specific heats of air is equal to. = 1.41
2. A perfect gas at 270C is heated at constant pressure till its volume is double. The final
temperature is = 3270C
3. An engine operates between temperature of 9000K and T2 and another engine between T2 and
8000K. For both to do equal work, value of T2 will be. = 6500K
4. Internal energy of a substance depends on = Temperature
5. Work done in compressing 1kg of gas adiabatically from p1,V1,T1 to p2, V2, T2 is equal to =
Cv(T2-T1)
6. The unit of entropy is = J/kg 0K
7. Indicated power of a 4-stroke engine is equal to = pLAN/2
8. Which of the following is not an internal combustion engine : a) 2 stroke petrol engine b)4
stroke petrol engine c) Diesel engine d) steam engine e) Gas turbine. = (d)
9. If one cylinder of a diesel engine receives more fuel than the others, then for that cylinder the:
a) exhaust will be smoky b) piston rings would stick into piston grooves c) exhaust
temperature will be high d) engine starts overheating e) all of the above. = (e)
10. The spark plug gap is normally maintained at: = 0.45 to 0.6mm
11. A distributor in spark ignition engines performs the function of : = Providing the correct firing
order in engine
12. Which of the following does not relate to C.I. engine:: a) fuel pump b) fuel injector c) governor
d) carburetor e) flywheel = (d)
13. Air fuel ratio in a jet engine is = 60:1
14. What is the value of Prandtl No.?
15. In domestic refrigerator, the tubes at the back of the refrigerator are: a) evaporator b) condenser
c) capillary tubes d)………
16. Which refrigerants has the highest critical point temperature. = Freon-11
17. Wet bulb temperature is. = indication of amount of moisture in air
18. On psychrometric chart, dry bulb temperature lines are. = Vertical
19. Surface tension has the units. = newtons/m
20. The line of action of the buoyant force acts through the. =centroid of the displaced volume of
fluid
21. A pressure of 25m of head of water is equal to. =245kN/m2
22. For a submerged body to be in stable equilibrium, the centre of gravity should be. =Below the
centre of buoyancy.
23. The actual velocity at vena contracta for flow through an orifice from a reservoir of height H=?.
=Cv√2gH
24. A body weighing 2kg in air weights 2.5kg when submerged in water. Its specific gravity is. = 6
25. In a free vortex motion: = each particle moves in a circular path with a speed varying inversely
as the distance from the centre.
26. A centrifugal pump has speed-1000rpm, Flow-1200l.p.m, Head-20m, Power-5H.P. If its speed
is increased to 1500rpm, new flow will be.: = 1800l.p.m
27. Runaway speed of a hydraulic turbine is: = the speed if the turbine runner is allowed to revolve
freely without load and with the wicket gates wide open.
28. 10m of water column is equal to = 100kN/m2
29. M.I. of a circular area about an axis perpendicular to the area is: = πr4/2
30. A projectile is fired at an angle θ to the vertical. Its horizontal range will be maximum when θ is
. =450
31. An elevator weighing 1000kg attains an upward velocity of 4m/sec in two seconds with uniform
acceleration. The tension in the supporting cables will be = 1200kg.
32. A 13m ladder is placed against a smooth vertical wall with its lower end 5m from the wall.
What should be the co-efficient of friction between ladder and floor so that it remains in
equilibrium. = 0.21
33. A car is moving with a velocity of 60km/hr and possesses energy of 5x105 joules. The mass of
the car will be. =3000kg.
34. If l is the span of a light suspension bridge whose each cable carries total weight (w) and the
central diop is y, the horizontal pull at each support is: = wl/y OR
35. A beam of length l, having uniform load w kg/unit length is supported freely at the ends. The
moments at mid span will be: = wl2/8.
36. A boiler shell 200cm dia and plate thickness 1.5cm is subjected to internal pressure of 1.5MN/
m2, then the hoop stress will be. = 100N/m2
37. 100KW is to be transmitted by each of two separate shafts. A is turning at 250rpm and B at
300rpm. Which shaft must have greater diameter.: = B
38. Two identical leaf springs of spring constant k are arranged like cantilevers in parallel and
attached at free end by a spring of spring constant k. The equivalent spring constant of
combination is; = 1.5k.
39. Automobile steering gear is an example of: = lower pair.
40. The type of coupling used to join two shafts whose axes are neither in same straight line nor
parallel, but intersect is. = Universal coupling.
41. To transmit power from one rotation shaft to another whose axes are neither parallel nor
intersecting, use: = Spiral gear.
42. A gear having 100 teeth is fixed and another gear having 25 teeth revolves around it, the centre
lines of both gears being joined by an arm. How many revolutions will be made by gear of 25
teeth for one revolution of arm. = 5 rev.
43. The secondary critical speed of a shaft occurs at: = twice the speed of primary critical speed.
44. Brittle coating technique is used for: = experimental stress analysis.
45. Factor of safety is the ratio of: = yield stress/working stress.
46. Type of gear used for non-intersection perpendicular shafts: = Hypoid gears.
47. Corrosion resistance of steel is increased by adding: = Chromium & Nickel
48. The product of Cupola is called: = cast iron
49. Brinell tester uses a hardness steel ball of size: = 10mm
50. Sintered and tungsten carbides can be machined by: = EDM
51. What kind of abrasive cut off wheel should be used to cut concrete, stone and masonry?
=Diamond grit.
52. In break-even analysis, total cost consists of: = Fixed cost + Variable cost.
53. The amount deducted from the salary of workers towards employees provident fund is :
=deposited in the account of worker with Provident Fund Commissioner.
54. PERT is: = event oriented technique
55. Bar charts are suitable for: = minor works.
56. on a PERT/CPM chart represents: = a significant event representing some mile-stone
57. Electron volt is the unit of : = Energy.
58. Seamless tubes are made by?
59. Reheating in gas turbine results in: = increase of work ratio and decrease of thermal efficiency.
60. Why DC current is not used in transformer?
61. What is the purpose of draft tube in hydraulic turbines: = to convert the kinetic energy into
pressure energy.
62. A mass of 100kg is falling from a height of 1m and penetrates the sand to 1m. what is the
resistance force of the sand?
63. Two cars travel in the same direction at 40km/hr at a regular distance. A car comes in the
opposite direction at 60km/hr. It meets each car in a gap of 8 seconds. What is the distance
between the two cars?

BRANCH: MECHANICAL
1. Euler’s load for columns (end conditions)
2. Relation b/w longitudinal stress nd Hoops stress (thin cylindrical shell)
3. First atomic power plant in India?
4. Drawing paper sizes:A0,A1,A2,A3,A4
5. In an electrolytic soln conduction takes place by…….
6. Problem in natural nd induced frequency……
7. Stud diameter for Boilers in Thermal Power plant…..
8. Kinematic pair…..
9. Rake angle….
10. Double bucket is used in which turbine……
11. If original size of a drawing was reduced to half, what is the scale size……
12. TIG welding process is used for which Metal…….
13. Laser is produced from which of the following…..(ruby, diamond, titanium, gold)
14. 8085 microprocessor is what bit……(4,8,16,32)
15. Problem in friction…..
16. In shafts operating at very high temp what s the lubricant used…..
17. For mass production which of the following process is preferable…(process, product, line)
18. Dynamometer s used to measure……
19. In casting, the content of the facing sand used is,,,,,
20. Boundary layer property,,,,,,
21. Formula for two springs in series…..
22. Nu=f(Pr,Gr)
23. First law of thermodynamics….(Q=W+dE)
24. Transistors-(CE,CB) qns2
25. npn diodes,,,,dopin(2qns)
26. Power Factor(2 problems)
27. 1 qn from IC chip
28. Which s the universal gate among the following (AND,OR,NAND,Ex-OR)
29. Semiconductor Material among following…..(germanium,gold,copper,silica)
30. Current, 2 resistance in series,,,,find voltage,,,
31. In car battery Voltage used was….
32. Material used for making high speed bearings,,,,,
60 questions from mechanical and other 60 questions from electrical nd electronics. Generally there will not be too many question from electrical&electronics in previous year qn papers, this one s exception. Concentrate in Theory of M/C, Thermodynamics, Prodn, FM, Strength of Matl, Materials and Metallurgy, Eng Mech…..
Section-2(Quants&Reasng-85,English-35, Total-120)
1. Problems in Geometry and Mensuration(10-15qns)
2. SI, CI and Shares(3qns)
3. Time Distance(2qns)
4. Ratio and Proportion(4qns)
5. Venn diag (1+1+2Qns)
6. Mixtures and Alligations (2qns)
7. Clock and Calendar (2qns)
8. Time cistern and Work (3qnsP)
9. Time and Distance (2qns)
10. Arithmetic Calc-square roots, cubes, etc (2qns)
11.Age (1qn)
12. Coding and Decoding
13. Analogy, direction, Blood Relations
14. GMAT model qns-(25 qns)
Col-A Col-B
5X8 6X7
a) col A > col B (b) col A < col B (c) col A= col B (d) no Relation (e) Answer not in option
15. Comprehension Reading-1(5qns)
16. Antonyms& Synonyms (5+5)
17. Spelling Mistake (5qns)
18. Sentence correction (5qns)
19. Jumbled Paragraph formation (5qns)
20. Fill in the Blanks (5qns)
For reasoning Verbal and Non verbal reasoning by R. S. Aggarwal is more than sufficient. For aptitude R. S Aggarwal is not sufficient. Learn more easy solving methods, Shortcuts-Refer TIME material.
Time is the main constraint-2.5hrs (240qns)….Multiple choice(5 options)…1/5 negative mark.. Concentrate more on section-2…

Paper pattern
Supervisor Trainee (ST):
The written test for ST post consists of 150 objective questions,to be answered in 2 Hrs time.Following are the sections –

Aptitude Test (covers Quantitative Aptitude,Reasoning,Logical thinking,English, General Awareness etc)
Technical Test (questions from your subjects – Elect./ Electronics/ Mech/ Civil engg)

There is negative mark of 0.2 for each wrong answer (1 mark for correct answer

Applicants have to refer their college syllabus to prepare for this ST exam, as questions would be based on it.

MAP

[MAP]https://maps.google.co.in/maps?q=Bharat+Heavy+Electricals+Ltd&ll=12.84672,77 .660422&spn=0.01182,0.020428&hq=Bharat+Heavy+Elect ricals+Ltd&radius=15000&t=m&z=16&iwloc=A[/MAP]
  #3  
31st March 2015, 09:51 AM
Unregistered
Guest
 
Re: Bharat Heavy Electricals Ltd Supervisor Trainee Exam syllabus and paper pattern

Will you provide me the syllabus and paper pattern of Bharat Heavy Electricals Ltd Supervisor Trainee Exam for Electrical and Electronics Engineering students ?
  #4  
31st March 2015, 09:53 AM
Super Moderator
 
Join Date: Apr 2013
Re: Bharat Heavy Electricals Ltd Supervisor Trainee Exam syllabus and paper pattern

As you want I am providing you syllabus and paper pattern of Bharat Heavy Electricals Ltd Supervisor Trainee Exam for Electrical and Electronics Engineering students.

BHEL Exam includes questions from the following:

Arithmetic Section:

1) Time and Work: Questions will come same like simple aptitude questions based on Time and Work.

2) Time and Distance: will come same like simple aptitude questions based on Time and Distance

3) Additions: Simple addition based questions will be there in this topic.

4) Subtractions: Simple subtraction based questions will be there in this topic.

5) Divisions: Simple division based questions will be there in this topic

6) LCM and HCF

7) Percentage: Simple percentage based questions will be there in this topic.

8) Simple Interest: Simple SI based questions will be there in this topic.

9) Compound Interest: Simple CI based questions will be there in this topic.

10) Clocks and Calendar


General English Section -
The questions will come under this General English section is given below:

1) Common Errors: English Grammar General Question will come in which you have to correct the sentences.

2) Reading Comprehension: English paragraph will be there in this section. You need to read and give the hidden answer from the paragraphs.

3) One Word Substitutions: in this section you have to give one word substitution to the whole sentence.

4) Fill in the blanks: simple questions will come in which you have to fill the vacant space from the given options.

5) Idioms and Phrases.

6) Sentence Rearrangements

Other sections :
General Knowledge
Reasoning
General Science

Technical Section:
in this section there will be 120 questions you have to solve which will be relevant to your Stream/ Branch.

General Aptitude:
in this section you will find question which is based on general aptitude.

Exam Pattern:



Syllabus for Electrical and Electronics Engineering for BHEL Engineering Trainee Exam::


1. Network Theory
2. Control System
3. Electronic Devices and Circuits
4. Analog Electronic Circuits
5. Signals and Systems
6. Microprocessors
7. Communication Systems
8. Microwave Engineering
9. Digital Electronic Circuits
10. Material and Components
11. Power Electronics
12. General Computer Engineering
13. General Awareness
  #5  
26th August 2015, 05:13 PM
upparpriya
Guest
 
Re: Bharat Heavy Electricals Ltd Supervisor Trainee Exam syllabus and paper pattern

mam/sir, i will going to write exam of bhel supervisor Trainee (Finance) , so please will you provide Previous year question paper & model question paper of supervisor Trainee (Finance).....


Quick Reply
Your Username: Click here to log in

Message:
Options

Thread Tools Search this Thread



All times are GMT +5. The time now is 03:25 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
SEO by vBSEO 3.6.0 PL2

1 2 3 4