2023 2024 Student Forum > Management Forum > Main Forum

 
  #2  
26th November 2014, 11:45 AM
Super Moderator
 
Join Date: Apr 2013
Re: BEE exam dates

Bureau of Energy Efficiency Entrance Exam is conducted by the National Productivity Council (NPC) on behalf Bureau of Energy Efficiency, a statutory body- under the Ministry of Power, Government of India for the post of Energy Managers and Energy Auditors is taken.
It is one of the most known Engineering Entrance Exams in India. This exam is normally held in the month of July or August.

BEE Entrance Exam Eligibility

For Energy Managers-

A Graduate Engineer or equivalent with 3 years of work experience.
M.Tech/ M.E. or equivalent with 2 years of work experience.
Graduate Engineer with Post Graduate Degree in Management or equivalent with 2 years of work experience.
Diploma Engineer or equivalent with 6 years of work experience.
Post Graduate in Science with 5 years of work experience.

For Energy Auditors-

A Graduate Engineer or equivalent with 3 years of work experience.
M.Tech / M.E or equivalent with 2 years of work experience.
Graduate Engineer with Post Graduate Degree in Management or equivalent with 2 years of work experience.

Tentative Examination Dates-

23rd & 24th August 2014 (Saturday and Sunday)

BEE Entrance Exam Syllabus

Paper I: General Aspects of Energy Management and Energy Audit


Energy Scenario: Commercial and Non-commercial energy, primary energy resources, commercial energy production, final energy consumption, energy needs of growing economy, long term energy scenario, energy pricing, energy sector reforms, energy and environment, energy security, energy conservation and its importance.
Re-structuring of the energy supply sector, energy strategy for the future, air pollution, climate change. Energy Conservation Act-2001 and its features.
Basics of Energy and its various forms: Electricity basics- DC & AC currents, electricity tariff, Thermal Basics-fuels, thermal energy contents of fuel, temperature & pressure, heat capacity, sensible and latent heat, evaporation, condensation, steam, moist air and humidity & heat transfer, units and conversion.
Energy Management & Audit: Definition, need and types of energy audit. Energy management (audit) approach-understanding energy costs, bench marking, energy performance, matching energy use to requirement, maximizing system efficiencies, optimizing the input energy requirements, fuel & energy substitution, energy audit instruments.
Material and Energy balance: Facility as an energy system, methods for preparing process flow, material and energy balance diagrams.
Energy Action Planning: Key elements, force field analysis, Energy policy purpose, perspective, contents, formulation, ratification, Organizing - location of energy management, top management support, managerial function, roles and responsibilities of energy manager, accountability. Motivating-motivation of employees: Information system-designing barriers, strategies; Marketing and communicating-training and planning.
Financial Management: Investment-need, appraisal and criteria, financial analysis techniques-simple pay back period, return on investment, net present value, internal rate of return, cash flows, risk and sensitivity analysis; financing options, energy performance contracts and role of ESCOs.
Project Management: Definition and scope of project, technical design, financing, contracting, implementation and performance monitoring. Implementation plan for top management, Planning Budget, Procurement Procedures, Construction, Measurement & Verification.
Energy Monitoring and Targeting: Defining monitoring & targeting, elements of monitoring & targeting, data and information-analysis, techniques -energy consumption, production, cumulative sum of differences (CUSUM).
Global environmental concerns: United Nations Framework Convention on Climate Change (UNFCC), sustainable development, Kyoto Protocol, Conference of Parties (COP), Clean Development Mechanism (CDM), Prototype Carbon fund (PCF).

Paper 2: Energy Efficiency in Thermal Utilities

Fuels and Combustion: Introduction to fuels, properties of fuel oil, coal and gas, storage, handling and preparation of fuels, principles of combustion, combustion of oil, coal and gas.
Boilers: Types, combustion in boilers, performances evaluation, analysis of losses, feed water treatment, blow down, energy conservation opportunities.
Steam System: Properties of steam, assessment of steam distribution losses, steam leakages, steam trapping, condensate and flash steam recovery system, identifying opportunities for energy savings.
Furnaces: Classification, general fuel economy measures in furnaces, excess air, heat distribution, temperature control, draft control, waste heat recovery.
Insulation and Refractories: Insulation-types and application, economic thickness of insulation, heat savings and application criteria, Refractory-types, selection and application of refractories, heat loss.
FBC boilers: Introduction, mechanism of fluidized bed combustion, advantages, types of FBC boilers, operational features, retrofitting FBC system to conventional boilers, saving potential.
Cogeneration: Definition, need, application, advantages, classification and saving potentials.
Waste Heat Recovery: Classification, advantages and applications, commercially viable waste heat recovery devices, saving potential.

Paper 3: Energy Efficiency in Electrical Utilities

Electrical system: Electricity billing, electrical load management and maximum demand control, power factor improvement and its benefit, selection and location of capacitors, performance assessment of PF capacitors, distribution and transformer losses.
Electric motors: Types, losses in induction motors, motor efficiency, factors affecting motor performance, rewinding and motor replacement issues, energy saving opportunities with energy efficient motors.
Compressed Air System: Types of air compressors, compressor efficiency, efficient compressor operation, Compressed air system components, capacity assessment, leakage test, factors affecting the performance and savings opportunities
HVAC and Refrigeration System: Vapor compression refrigeration cycle, refrigerants, coefficient of performance, capacity, and factors affecting Refrigeration and Air conditioning system performance and savings opportunities.
Vapor absorption refrigeration system: Working principle, types and comparison with vapor compression system, saving potential
Fans and blowers: Types, performance evaluation, efficient system operation, flow control strategies and energy conservation opportunities.
Pumps and Pumping System: Types, performance evaluation, efficient system operation, flow control strategies and energy conservation opportunities.
Cooling Tower: Types and performance evaluation, efficient system operation, flow control strategies and energy saving opportunities assessment of cooling towers.
Lighting System: Light source, choice of lighting, luminance requirements, and energy conservation avenues.
Diesel Generating system: Factors affecting selection, energy performance assessment of diesel conservation avenues.
Energy Efficient Technologies in Electrical Systems: Maximum demand controllers, automatic power factor controllers, energy efficient motors, soft starters with energy saver, variable speed drives, energy efficient transformers, electronic ballast, occupancy sensors, energy efficient lighting controls, energy saving potential of each technology.

Paper-4: Energy Performance Assessment for Equipment and Utility Systems

Open Book examination on the following energy performance assessments for equipment and utility systems:

Boilers, Furnaces
Cogeneration, Turbines (gas, steam)
Heat Exchangers
Electric Motors, Variable Speed Drives
Fans and Blowers, Water Pumps, Compressors
HVAC systems
Lighting Systems
Performing Financial Analysis.
Applications of Non-conventional & Renewable Energy Sources (NRES)
Waste minimization and resource conservation
  #3  
1st March 2016, 09:29 AM
Unregistered
Guest
 
Re: BEE exam dates

Sir I am preparing for the Bureau of Energy Efficiency exam so looking for the BEE exam dates. Also can you give me the details syllabus of the BEE exam
  #4  
1st March 2016, 09:30 AM
Super Moderator
 
Join Date: May 2012
Re: BEE exam dates

The Bureau of Energy Efficiency is an agency of the Government of India, under the Ministry of Power created in March 2002 under the provisions of the nation's 2001 Energy Conservation Act.

The Official notification of Bureau of Energy Efficiency (BEE) will be published expected in June, 2016.

Those are interested should read this notification and if you are eligible you can apply for this via official website by filling up the application form.

BEE Exam Dates 2016:

1)Application form will be issued in July, 2016.

2)An exam date will be Last week of August, 2016.


BEE Syllabus 2016:


Bureau of Energy Efficiency (BEE) syllabus is in “Four” parts:
1.Part I: General Aspects of Energy Management and Energy Audit
2.Part II: Energy Efficiency in Thermal Utilities
3.Part III: Energy Efficiency in Electrical Utilities
4.Part IV: Energy Performance Assessment for Equipment and Utility Systems

Syllabus for General Aspects of Energy Management and Energy Audit:
1.Energy scenario
2.Basics of energy and its various forms
3.Energy management and audit
4.Material and energy balance
5.Energy action planning
6.Financial management
7.Project management
8.Energy monitoring and targeting

Syllabus for Energy Efficiency in Thermal Utilities:
1.Fuels and Combustion
2.Boilers
3.Steam system
4.Furnaces
5.Insulation and Refractory’s
6.FBC boilers
7.Waste heat recovery

Syllabus for Energy Efficiency in Electrical Utilities:
1.Electrical system
2.Electric motors
3.Compressed Air System
4.HVAC and Refrigeration System
5.Vapour absorption refrigeration system
6.Fans and blowers
7.Pumps and Pumping System
8.Cooling tower
9.Lighting system
10.Diesel Generating system
11.Energy Efficient Technologies in Electrical Systems

Syllabus for Energy Performance Assessment for Equipment and Utility Systems:

1.Boilers, Furnaces
2.Cogeneration, Turbines (gas, steam)
3.Heat Exchangers
4.Electric Motors, Variable Speed Drives
5.Fans and Blowers, Water Pumps, Compressors
6.HVAC systems
7.Lighting Systems
8.Performing Financial Analysis.
9.Applications of Non-conventional & Renewable Energy Sources (NRES)
10.Waste minimization and resource conservation


Quick Reply
Your Username: Click here to log in

Message:
Options

Thread Tools Search this Thread



All times are GMT +5. The time now is 03:42 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
SEO by vBSEO 3.6.0 PL2

1 2 3 4